Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Samtec ZSS-120-08-S-D-1158 is a 2-row, 40-contact board stacking connector with a terminal pitch of 2.54mm and UL 94V-0 flammability rating. It features male contacts for solder termination and straight mounting style. Ideal for applications requiring reliable board-to-board connections in electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Continental Prestige Electronics
Argo Parts USA
Netroflash
Having 2 rows loaded allows for more connections and flexibility in the design of the circuit.
Board stacking connectors allow for easy and secure stacking of multiple circuit boards, making it ideal for applications where space is limited.
UL 94V-0 flammability rating ensures that the connector meets high safety standards in case of fire hazards.
With 40 contacts, this connector provides a high level of connectivity for various components on the circuit board.
Board mounting type offers secure attachment to the PCB, ensuring stability and reliability in operation.
With a terminal pitch of 2.54mm, this connector is compatible with standard PCB layouts and widely used components.
Solder termination provides a strong and durable connection between the connector and the PCB, ensuring long-lasting performance.
Male connectors are commonly used in electronic devices for reliable and secure connections with female counterparts.
Straight mounting style simplifies the installation process and ensures proper alignment of the connector on the PCB.
Headers & Edge Type Connectors ZSS-120-08-S-D-1158 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Connector Type:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
ZSS-120-08-S-D-1158 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sensitron Semiconductor
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
Comchip Technology
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semitronics
22-01-3057
Molex
Molex 22-01-3057 is a board connector with 0.1" pitch, suitable for commercial applications. Features include 5 contacts, 4A signal current rating, and -40 to 105°C operating temperature range. Ideal for cable mounting with crimp termination, this female connector offers high durability and polarization key for secure connections.
S4B-PH-SM4-TB(LF)(SN)
J S T Mfg
S4B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with mating pitch of 0.079". It features tin copper termination, polyamide6T insulator, and right angle mounting style. Ideal for applications requiring surface mount connectors with male contact gender and rectangular contact pattern.
103948-9
TE Connectivity
TE Connectivity 103948-9 is a board connector with 10 contacts, 0.1" pitch, and 3A signal rating. It features POLYETHYLENE insulation, tin/lead finish, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with latching mounting options.
10067847-001RLF
Amphenol Communications Solutions
Amphenol's 10067847-001RLF is a PCB connector with 11 contacts, rated at 0.5A signal current. Featuring a mating contact pitch of 0.066", it offers high insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for board mounting applications, this durable connector has a plating thickness of 50u and meets UL standards.
DF11-18DP-2DSA(01)
Hirose Electric
DF11-18DP-2DSA(01) by Hirose Electric is a 2-row, 18-contact board connector with gold termination finish. It offers a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring durability, reliability, and signal current rating up to 2A in commercial settings.
B2PS-VH
B2PS-VH by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This UL 94V-0 rated connector is commonly used in applications requiring secure male connections.
823-22-010-10-001101
Mill-max Mfg
Mill-max Mfg's 823-22-010-10-001101 is a 2-row, 10-contact board stacking connector with gold over nickel finish. Featuring UL94V-0 flammability rating, it offers straight mounting for solder termination. Ideal for applications requiring reliable connections in electronics and PCB assemblies.
801-43-025-10-003000
801-43-025-10-003000 by Mill-max Mfg is a GOLD-finished BOARD CONNECTOR with 25 contacts, 2.54mm pitch, and FEMALE gender. It is used in applications requiring SOCKET-style connectors for straight BOARD mounting using SOLDER termination.
DM3AT-SF-PEJM5
The Hirose Electric DM3AT-SF-PEJM5 is a card edge connector with 8 contacts, gold termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.043", withstands up to 500VAC, and operates b/w -25°C to 85°C. Ideal for board mounting applications in commercial settings with durability up to 10,000 cycles.
50-57-9404
The Molex 50-57-9404 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a body length of 0.399", insulation resistance of 10^10 ohm, and operating temperature range from -40 to 105°C. Ideal for use in electronics requiring a reliable female plug connector with crimp termination and polarized housing.
154763
Erni Electronics
Erni Electronics 154763 is a Headers & Edge Type Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 10^10 ohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board stacking applications, featuring liquid crystal polymer insulator material and gold mating contact finish.
22-01-3047
Molex 22-01-3047 is a board connector with 0.1" pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulation, it offers 700VAC dielectric voltage and operates b/w -40 to 105 °C. Ideal for commercial applications requiring a durable, polarized female connector with 4A signal current capacity.
B6B-PH-SM4-TB(LF)(SN)
B6B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for PCB applications requiring POLYAMIDE66 insulator, COPPER ALLOY contacts, and TIN COPPER finish in a compact 0.628"x.197"x.26" body.
DF11-6DS-2C
DF11-6DS-2C by Hirose Electric is a 2-row board connector with 6 contacts, rated at 2A signal current. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 650VAC and operates b/w -30 to 85°C. Ideal for commercial applications requiring durable connectors with crimp termination and locking mounting option.
TSW-104-07-T-S
Samtec
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
66506-354
Berg Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 40; Mounting Type: BOARD; Mixed Contacts: NO;
502352-0200
The Molex 502352-0200 is a board connector with 2 contacts, featuring a mating contact pitch of 0.079" and insulation resistance of 1 Gohm. Ideal for commercial applications, it has a max operating temperature of 105°C and termination type of surface mount.
103
Keystone Electronics
103 by Keystone Electronics is a PCB connector with 2 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body length of 1.13" and depth of 0.335", with terminal pitch of 20.49mm. Ideal for straight mounting on boards, it features male contact gender and leaf-style contacts in a rectangular pattern.
5-826629-0
TE Connectivity 5-826629-0 is a BOARD CONNECTOR with 50 contacts, rated at 5A. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this connector offers durability up to 150 cycles and uses SOLDER termination.
3220-10-0100-00
Cnc Tech
Cnc Tech's 3220-10-0100-00 is a board connector with 2 rows, 10 contacts made of brass with gold flash finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for applications requiring male connectors on boards with straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ZSS-104-09-T-D-1340
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; UL Flammability Code: 94V-0;
ZSS-107-02-S-D-555
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
ZSS-104-03-T-D-675
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; Terminal Pitch (mm): 2.54;
ZSS-106-07-G-D-1140
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; Filter Feature: NO;
ZSS-108-01-G-S-450-LL
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54; Total No. of Contacts: 8;
ZSS-110-01-F-D-505
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Terminal Pitch (mm): 2.54; MIL Conformity: NO;
ZSS-132-09-L-D-1340
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE;
ZSS-136-09-G-D-1320
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; MIL Conformity: NO;
ZSS-125-01-G-D-450-LL
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e4; Terminal Pitch (mm): 2.54; Filter Feature: NO;
ZSS-103-02-S-D-586
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Termination Type: SOLDER; DIN Conformance: NO;
ZSS-113-05-L-D-915-LL
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; JESD-609 Code: e3; Mixed Contacts: NO; Mounting Style: STRAIGHT;
ZSS-111-08-L-D-1180
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Terminal Pitch (mm): 2.54;
ZSS-108-03-L-D-667
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN OVER NICKEL; DIN Conformance: NO; JESD-609 Code: e3;
ZSS-117-04-S-D-840
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; Mounting Type: BOARD;
ZSS-110-03-L-D-715
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Terminal Pitch (mm): 2.54;
ZSS-136-09-S-D-1340
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1414VAC; No. of Connectors: ONE; Insulation Resistance: 5000000000 ohm;
ZSS-110-02-L-D-610
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Total No. of Contacts: 20;
ZSS-120-08-S-D
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: MATTE TIN OVER NICKEL; IEC Conformity: NO; Manufacturer Series: ZSS;
ZSS-120-08-S-D-1150
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Total No. of Contacts: 40; IEC Conformity: NO;
ZSS-120-08-S-D-1195
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mounting Type: BOARD; UL Flammability Code: 94V-0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved