Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's TFM-110-03-L-D is a 20-contact board connector with 0.05" pitch, ideal for commercial applications. Featuring gold mating contacts and black insulator, it operates b/w -55 to 125°C. With solder termination and UL94V-0 flammability rating, this male connector suits PCBs with 1.27mm terminal pitch.
Median Price
$5.350
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.870
100+ parts
$2.640
1k+ parts
$2.030
10k+ parts
$1.490
DigiKey
$7.830
-
Vyrian
Nova Conductors
Aranea Global
The small pitch allows for higher density of contacts, making this connector suitable for applications where space is limited.
The compact body length helps in saving space on the PCB while providing necessary connectivity.
Liquid crystal polymer offers excellent electrical properties and heat resistance, ensuring reliable performance in demanding environments.
With a high rated current capacity, this connector can handle higher power signal transmission effectively.
Solder termination provides a secure and reliable connection between the connector and the PCB, ensuring stable signal transmission.
The UL 94V-0 flammability rating indicates that this product meets stringent safety standards for fire resistance.
Headers & Edge Type Connectors TFM-110-03-L-D attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Body Width:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
TFM-110-03-L-D Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bytesonic Electronics
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BM05B-SRSS-TBT(LF)(SN)
J S T Mfg
BM05B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, COPPER ALLOY material, and TIN finish. It is a STRAIGHT mounting style connector for surface mount applications in headers & edge type connectors category.
SM05B-SRSS-TB(LF)(SN)
SM05B-SRSS-TB(LF)(SN) by J S T Mfg is a 5-contact board connector with 0.039" pitch, ideal for PCB applications. Featuring TIN COPPER finish, POLYAMIDE insulator, and 500VAC dielectric voltage rating. Operating b/w -25 to 85 °C, it offers male contact gender and right-angle mounting style.
357-074-442-278
Edac
Edac 357-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts in 2 rows, featuring a 0.156" pitch and rated for 5A signal current. With UL certification, it has a temperature range of -40 to 105°C, suitable for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
B2B-PH-K-S(LF)(SN)
B2B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 2A signal current rating. Ideal for applications requiring high insulation resistance, POLYAMIDE66 insulator material, and TIN COPPER termination finish in a compact 0.232" x 0.177" x 0.236" body size.
47553-1001
Molex
The Molex 47553-1001 is a PCB connector with a mating contact pitch of 0.05", insulation resistance of 100MΩ, and a dielectric withstand voltage of 500VAC. It is commonly used in commercial applications for board mounting, with a durability of 5000 cycles and a rated current of 0.5A.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
B9B-PH-K-S(LF)(SN)
B9B-PH-K-S(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. It features POLYAMIDE66 insulation, male SQ PIN-SKT contact style, and press fit termination. Ideal for applications requiring high insulation resistance and UL94V-0 flammability rating in electronic devices.
87437-0373
The Molex 87437-0373 is a board connector with 0.059" mating contact pitch, 1000000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for commercial applications, it features a polarized housing, surface mount termination, and can handle temperatures from -55 to 105 °C.
VHR-2N
VHR-2N by J S T Mfg is a 2-contact BOARD CONNECTOR with POLYAMIDE6 insulator. Featuring mating pitch of 0.156", it has 0.309" x 0.244" x 0.413" dimensions. Ideal for CABLE mounting, CRIMP termination, and applications requiring FEMALE SQ PIN-SKT contacts.
B4B-XH-A
B4B-XH-A by J S T Mfg is a BOARD CONNECTOR with 4 contacts, featuring Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and is designed for straight board mounting applications. The connector's UL Flammability Code is 94V-0, making it suitable for various electronic devices requiring reliable male contact connections.
22-01-3087
The Molex 22-01-3087 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a dielectric voltage of 700VAC and insulation resistance of 1Gohm, it operates b/w -40 to 105°C. With a removable contact block design, it has 8 contacts and is UL94V-0 rated for applications requiring durability and reliability in commercial settings.
FTSH-105-01-L-DV-P-TR
Samtec
Samtec's FTSH-105-01-L-DV-P-TR is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. Featuring gold mating contacts over nickel, it has a temperature range of -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
GHR-04V-S
GHR-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYBUTYLENE TEREPHTHALATE insulator, and 500VAC dielectric voltage. Ideal for CABLE mounting applications, it has a rated current of 1A and operates b/w -25 to 85°C.
801-43-020-10-012000
Mill-max Mfg
Mill-max Mfg's 801-43-020-10-012000 is a 20-contact board connector with matte tin over nickel finish. Featuring a terminal pitch of 2.54mm, it is ideal for applications requiring a female socket connector with UL94V-0 flammability rating. Suitable for straight mounting on boards, this connector offers reliable solder termination.
B2B-ZR-SM4-TF(LF)(SN)
B2B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
51021-0900
The Molex 51021-0900 is a board connector with 9 contacts, 0.049" pitch, and 0.512" body length. It has a female contact gender, crimp termination type, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring reliable cable mounting with locking option.
150201
Weidmueller & Kg
Weidmueller & Kg's 150201 is a BOARD CONNECTOR with TIN finish, 4 contacts, and FEMALE gender. It is used for CABLE mounting with SCREW termination in PLUG body style.
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
B3B-XH-A-GU
BOARD CONNECTOR; Manufacturer Series: XH;
472192001
Molex 472192001 is a PCB connector with 0.043" mating contact pitch, 0.535" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a durable, right angle mounting receptacle for commercial reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TFM-110-01-L-D-RE1-WT
Samtec TFM-110-01-L-D-RE1-WT is a 20-contact board connector with 0.05" pitch, suitable for PCBs with rectangular contact pattern. It features tin termination finish, phosphor bronze contacts, and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable right-angle mounting with polarized housing and UL flammability rating of 94V-0.
TFM-110-01-S-D-RE1-WT
Samtec TFM-110-01-S-D-RE1-WT is a 20-contact board stacking connector with 0.05" pitch, ideal for commercial applications. Features include matte tin termination, liquid crystal polymer insulator, and gold mating contact finish. With a temperature range of -55 to 125°C, it offers reliable signal transmission in various electronic devices.
TFM-105-02-L-S-K-TR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
TFM-107-01-L-D-RA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; JESD-609 Code: e3;
TFM-113-02-L-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Filter Feature: NO;
TFM-105-02-S-D-WT
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
TFM-105-01-S-D-WT
Samtec TFM-105-01-S-D-WT is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. It features gold over nickel mating contacts, phosphor bronze material, and liquid crystal polymer insulator. Ideal for commercial applications requiring a reliable signal current of up to 5A at temperatures ranging from -55°C to 125°C.
TFM-110-01-L-D-WT
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 825VAC; No. of Connectors: ONE;
TFM-110-01-L-D-WT-K
Samtec TFM-110-01-L-D-WT-K header connector features 0.05" contact pitch, 5000000000 ohm insulation resistance, and 750VAC dielectric voltage. Ideal for board connections in applications requiring a durable, polarized housing with male contacts and solder termination.
TFM-110-01-L-D-DS
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 825VAC; No. of Connectors: ONE; Reference Standard: UL, CSA;
TFM-105-02-S-D-A-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
TFM-110-01-L-D-A
TFM-110-01-L-D-A by Samtec is a 20-contact, 2-row board connector with a mating contact pitch of 0.05 inches. It has a liquid crystal polymer insulator and can operate in temperatures ranging from -55 to 125°C. This connector is commonly used in commercial applications requiring reliable signal transmission.
TFM-103-01-L-D-RA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.05;
TFM-107-02-L-D-K-TR
TFM-107-02-L-D-K-TR by Samtec is a 2-row, 14-contact board connector with a mating contact pitch of 0.05 inches. It has a max operating temperature of 125°C and is suitable for surface mount applications.
TFM-107-02-S-S-K-TR
TFM-125-02-S-D-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
TFM-120-02-L-DH-TR
TFM-120-02-L-DH-TR by Samtec is a 40-contact, right angle, surface mount board stacking connector with a terminal pitch of 1.27mm. It is UL 94V-0 rated and features tin contact finish with a nickel barrier. This connector is commonly used in applications requiring headers and edge type connectors.
TFM-110-02-S-D-SN-TR
TFM-107-02-L-D-WT
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 825VAC; No. of Connectors: ONE;
TFM-120-02-L-DH
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of Rows Loaded: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved