Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec QSE-028-01-L-D-DP-A-K-TR is a 2-row board stacking connector with 56 contacts. It features a mating contact pitch of 0.031", matte tin termination, and liquid crystal polymer insulator material. Ideal for applications requiring durability, it has a rated current of 1.3A and operates b/w -55°C to 125°C temperature range.
Median Price
$9.160
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Master Electronics
1+ parts
$6.820
100+ parts
-
1k+ parts
$5.200
10k+ parts
Mouser Electronics
$7.300
$6.680
$5.760
DigiKey
$10.170
$7.343
$7.153
Powell Electronics
$10.218
$7.356
Sager
$10.220
$7.360
$6.230
Verical
$8.843
RS (Exports)
$8.945
Vyrian
ACDS - Activité Composants Distribution Service
IBS Electronics
$7.332
$5.372
$3.709
TME
$8.910
Speed Components Ltd
Nova Conductors
Continental Prestige Electronics
$9.010
$6.970
Authorized Procurement Solutions
Perfect Parts
Kepictronics
Cyclops Electronics Ltd (Excess)
Aranea Global
Glotronic Ltd.
Argo Parts USA
The small mating contact pitch ensures a tight and secure connection between the connectors, enhancing reliability and reducing signal interference.
The ample body length provides sufficient surface area for the connectors to be securely mounted on the circuit board, ensuring stability during operation.
The termination contact finish of Matte Tin with a Nickel barrier offers excellent corrosion resistance and ensures long-lasting performance of the connectors.
The use of Liquid Crystal Polymer as the insulator material provides high temperature resistance and mechanical strength, making the connectors suitable for demanding environments.
Having two rows loaded allows for increased capacity and flexibility in connecting multiple components, making the product versatile and suitable for various applications.
The high maximum operating temperature ensures that the connectors remain reliable and perform efficiently even under elevated temperature conditions.
Phosphor Bronze contact material offers excellent conductivity and durability, ensuring reliable signal transmission and long-term performance of the connectors.
The Gold over Nickel mating contact finish provides superior conductivity and corrosion resistance, ensuring reliable electrical connections and longevity of the product.
The high rated current for signals indicates that the connectors can handle a significant amount of electrical load, making them suitable for applications requiring high signal transmission capabilities.
The board mounting option with positioning pins ensures secure and precise installation of the connectors on the circuit board, reducing the risk of misalignment or disconnection.
Headers & Edge Type Connectors QSE-028-01-L-D-DP-A-K-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
QSE-028-01-L-D-DP-A-K-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Rectron
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Diodes Incorporated
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
640456-4
TE Connectivity 640456-4 is a board connector with 0.1" pitch, suitable for commercial applications. It features TIN finish, 5A signal current rating, and GLASS FILLED POLYESTER insulator material. Ideal for use in electronics requiring a male contact gender and straight mounting style.
DF13-4S-1.25C
Hirose Electric
DF13-4S-1.25C by Hirose Electric is a 4-contact board connector with 0.049" pitch, rated for 1A signal current. Featuring polyamide insulation and UL94V-0 flammability, it operates b/w -35°C to 85°C. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
XF2M-3015-1A
Omron
Omron XF2M-3015-1A is a FFC/FPC connector with 30 contacts, gold termination finish, and 0.020" pitch. It has a durability of 20 cycles and operates b/w -30°C to 85°C. Ideal for board mounting applications requiring high reliability and signal currents up to 0.5A.
QSH-030-01-L-D-A-K-TR
Samtec
QSH-030-01-L-D-A-K-TR by Samtec is a 60-contact, 2-row stacking connector with a mating contact pitch of 0.02". It features a liquid crystal polymer insulator, gold mating contact finish, and phosphor bronze contact material. Ideal for board-to-board applications requiring high durability and reliability in commercial settings.
2110110-1
The TE Connectivity 2110110-1 is a board connector with 180 contacts, featuring a mating contact pitch of 0.075" and insulator made of glass-filled liquid crystal polymer. It has a body length of 1.197", width of 0.909", and depth of 1.272". Ideal for applications requiring high reliability in commercial settings, such as PCB connections with rectangular patterns at temperatures ranging from -55°C to 85°C.
B4P-VH(LF)(SN)
J S T Mfg
B4P-VH(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and 10A signal current rating. Ideal for PCB applications requiring POLARIZED HOUSING, it features BRASS contacts with TIN finish and WHITE insulator color.
324-91-162-41-002000
Mill-max Mfg
BOARD CONNECTOR; Contact Material: BERYLLIUM COPPER; JESD-609 Code: e0; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED;
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
15-91-0100
Molex
Molex 15-91-0100 is a 2-row, 10-contact board connector with 0.1" pitch. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and brass contacts. Suitable for PCB applications with operating temperatures from -40°C to 120°C, UL94V-0 rated for reliability in commercial settings.
PHR-4
PHR-4 by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator material. It has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for applications requiring a polarized housing with 4 contacts in cable mounting setup.
1712961105
Molex 1712961105 header connector features 0.075" mating contact pitch, matte tin over nickel termination finish, and polyethylene insulator. With 15 loaded rows and 150 contacts, it is ideal for board connections in commercial applications with a rated signal current of 0.75A.
104031-0811
104031-0811 by Molex is a PCB connector with 8 contacts, gold finish, and 0.043" pitch. It has a glass-filled liquid crystal polymer insulator, operates b/w -25°C to 85°C, and offers durability of 10k cycles. Ideal for commercial applications requiring male compression contacts in right-angle mounting on boards.
FTSH-105-01-L-DV-K-A-P-FR
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
S2B-PH-K-S
S2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and is ideal for RIGHT ANGLE mounting on boards. This connector is UL 94V-0 rated, making it suitable for various electronic applications.
FTSH-105-01-L-DV
The Samtec FTSH-105-01-L-DV is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, surface-mountable connector with a UL94V-0 flammability rating.
54104-4031
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
26-60-4030
Molex 26-60-4030 is a board connector with 3 contacts, featuring matte tin finish and glass-filled polyester insulator. With 1000000000 ohm insulation resistance, it offers durability of 25 cycles. Ideal for commercial applications requiring reliable connections in straight mounting style.
52465-1071
52465-1071 by Molex is a 2-row BOARD CONNECTOR with 0.031" pitch, 10 contacts, and 0.5A signal rating. It features LIQUID CRYSTAL POLYMER insulator, TIN finish, and 500VAC dielectric voltage. Ideal for commercial applications requiring STRAIGHT mounting and SURFACE MOUNT termination.
DF40C-100DS-0.4V(51)
DF40C-100DS-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" mating pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for applications requiring high durability and reliability in commercial settings with -35 to 85 °C operating temperature range.
1057
Keystone Electronics
PCB CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QSE-020-01-L-D-A-K-TR
Samtec QSE-020-01-L-D-A-K-TR is a 40-contact board stacking connector with 0.031" pitch, suitable for PCB mounting. Featuring liquid crystal polymer insulator and matte tin finish, it operates b/w -55°C to 125°C. With durability of 100 cycles, it's ideal for commercial applications requiring reliable signal transmission.
QSE-020-01-L-D-A
Samtec's QSE-020-01-L-D-A is a 40-contact, 2-row board stacking connector with a mating contact pitch of 0.031". It features gold over nickel finish, operates b/w -55 to 125°C, and has a durability of 100 cycles. Ideal for commercial applications requiring high reliability and signal currents up to 1.3A.
QSE-020-01-L-D-A-K
QSE-020-01-L-D-A-K by Samtec is a board stacking connector with a mating contact pitch of 0.032 inch. It has a body length of 0.838 inch and a body width of 0.285 inch. This connector is commonly used in applications that require high durability and surface mount termination.
QSE-020-01-L-D-A-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
QSE-020-01-L-D-A-RT1
BOARD STACKING CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: NOT SPECIFIED; JESD-609 Code: e3;
QSE-020-01-F-D-A-K-TR
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;
QSE-020-01-L-D-A-L-K-TR
BOARD STACKING CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
QSE-020-01-L-D-A-GP
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Filter Feature: NO; IEC Conformity: NO;
QSE-020-01-F-D-A
The Samtec QSE-020-01-F-D-A is a 40-contact, 2-row board stacking connector with a mating contact pitch of 0.031". It features an insulation resistance of 5G ohm and can withstand voltages up to 1000VAC. Ideal for applications requiring high reliability in commercial environments, this female socket connector has a straight mounting style and surface mount termination type.
QSE-020-01-F-D-A-K
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 675VAC; No. of Connectors: ONE;
QSE-020-01-L-D-A-GP-K
BOARD STACKING CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
QSE-020-01-L-D-A-FL
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; No. of Rows Loaded: 2; DIN Conformance: NO;
QSE-040-01-L-D-A
Samtec's QSE-040-01-L-D-A is a 2-row, 80-contact board stacking connector with liquid crystal polymer insulator. It features tin termination with nickel barrier, gold mating finish, and operates b/w -55°C to 125°C. Ideal for PCB applications requiring a 0.031" pitch and rated at 1.3A signal current, it offers durability of 100 cycles and complies with UL and CSA standards.
QSE-020-01-F-D-A-TR
QSE-040-01-H-D-A
Samtec's QSE-040-01-H-D-A is a 2-row, 80-contact board stacking connector with gold finish. Featuring a mating contact pitch of 0.031", it offers high insulation resistance of 5000000000 ohm and dielectric voltage withstand of 1000VAC. Ideal for commercial applications, this polarized housing connector operates b/w -55 to 125°C.
QSE-040-01-H-D-A-FL
QSE-040-01-H-D-A-FL by Samtec is a 2-row, 80-contact board connector with a mating contact pitch of 0.315 inches. It features a liquid crystal polymer insulator and has a max operating temperature of 125°C. This connector is commonly used in applications requiring high durability and signal current up to 2A.
QSE-040-01-H-D-A-K-TR
QSE-020-01-F-D-A-GP
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: SOCKET; Mixed Contacts: NO; Contact Material: PHOSPHOR BRONZE;
QSE-040-01-H-D-A-GP
BOARD STACKING CONNECTOR; Termination Contact Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
QSE-040-01-H-D-A-RT1
BOARD STACKING CONNECTOR; Termination Contact Finish: GOLD OVER NICKEL; Manufacturer Series: QSE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved