Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's MMS-125-02-F-DV is a 50-contact, 2-row header with 0.079" pitch and 3u plating thickness. With a temperature range of -55 to 125°C, it's ideal for commercial applications requiring a reliable, polarized board connector with surface mount termination.
Median Price
$6.610
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.510
100+ parts
$5.420
1k+ parts
$4.340
10k+ parts
$2.810
Master Electronics
-
$5.620
$3.680
$2.900
DigiKey
$6.710
Verical
$5.940
Chip1Stop
$7.710
Powell Electronics
$7.900
Nova Conductors
$3.770
Vyrian
IBS Electronics
$5.938
TME
$7.340
Argo Parts USA
Continental Prestige Electronics
$3.694
Netroflash
AZTECH Wire
$15.242
The close contact pitch allows for a high density of connections, making this product suitable for applications requiring many connections in a small space.
The long body length provides ample space for multiple rows of contacts, allowing for a greater number of connections in a single connector.
The use of tin with a nickel barrier ensures excellent conductivity and resistance to corrosion, making this connector highly reliable in various environments.
With a high maximum operating temperature, this product can withstand elevated temperatures without compromising performance, making it suitable for industrial applications.
The large number of contacts allows for multiple signal paths, making this connector ideal for complex electronic systems requiring numerous connections.
Headers & Edge Type Connectors MMS-125-02-F-DV attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
MMS-125-02-F-DV Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002-T1-E3
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Gulf Semiconductor
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
51021-0300
Molex
The Molex 51021-0300 is a board connector with 3 contacts, 0.049" pitch, and insulation resistance of 100M ohm. It has a temperature range of -40 to 85°C, ideal for commercial applications requiring reliable female crimp connectors in cable assemblies with locking mounting option.
TSW-103-07-G-S-LL
Samtec
The Samtec TSW-103-07-G-S-LL is a 3-contact board connector with gold-plated phosphor bronze contacts. It has a mating contact pitch of 0.1" and termination via soldering, making it ideal for commercial applications requiring reliable connections on PCBs with a terminal pitch of 2.54mm.
52465-1071
52465-1071 by Molex is a 2-row BOARD CONNECTOR with 0.031" pitch, 10 contacts, and 0.5A signal rating. It features LIQUID CRYSTAL POLYMER insulator, TIN finish, and 500VAC dielectric voltage. Ideal for commercial applications requiring STRAIGHT mounting and SURFACE MOUNT termination.
S2B-PH-SM4-TB
J S T Mfg
S2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2mm for SURFACE MOUNT applications in headers & edge type connectors. The connector is UL 94V-0 rated and suitable for RIGHT ANGLE mounting on boards.
1-2129458-1
TE Connectivity 1-2129458-1 is a PCB connector with 5 contacts, rated at 25V and 12.5A signal current. Made of polyethylene, it operates b/w -40 to 85°C. Ideal for board mounting applications requiring a right angle jack with solder termination.
PHR-5
PHR-5 by J S T Mfg is a 5-contact board connector with a mating contact pitch of 0.079 inches. It has a body length of 0.465 inch and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in applications requiring a compact and reliable connection for signal transmission.
B3B-XH-A(LF)(SN)
B3B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for applications requiring a male connector with 3A signal current, it features POLYAMIDE66 insulator material and operates b/w -25 to 85 °C.
2199230-4
TE Connectivity 2199230-4 is a CARD EDGE CONNECTOR with POLYETHYLENE insulator. It has 67 contacts, 0.02" pitch, and operates b/w -40 to 80°C. Ideal for board mounting applications requiring FEMALE compression contacts in a RIGHT ANGLE configuration.
54104-4031
Molex 54104-4031 is a FFC/FPC connector with 40 contacts, 0.020" pitch, and gold termination finish. Ideal for board mounting applications with a temperature range of -20 to 85°C. Features include polyamide insulator, 250VAC voltage rating, and UL94V-0 flammability code.
31249116
Ria Electronic
BOARD CONNECTOR; Option: GENERAL PURPOSE;
640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Manufacturer Series: 640456; Mixed Contacts: NO;
61300311121
Wuerth Elektronik & Kg
61300311121 by Wurth Elektronik is a board connector with 0.1" mating contact pitch, 3A signal current rating, and gold over nickel termination finish. It is used in commercial applications, featuring a temperature range of -40 to 125°C and UL reference standard compliance.
2-640456-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; UL Flammability Code: 94V-0; Terminal Pitch (mm): 2.54;
TSW-102-07-L-S
Samtec's TSW-102-07-L-S is a 2-contact board connector with a 0.1" pitch, ideal for commercial applications. Featuring matte tin over nickel termination, gold mating finish, and phosphor bronze contacts, it operates b/w -55°C to 125°C. With UL certification and a 94V-0 flammability rating, this male connector offers reliable performance in various electronic devices.
SHF-105-01-L-D-SM-LC
The Samtec SHF-105-01-L-D-SM-LC is a 2-row, 10-contact board connector with Tin-Nickel finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. Ideal for use in various electronic devices requiring male connectors with straight mounting style.
324-91-164-41-002000
Mill-max Mfg
BOARD CONNECTOR; Termination Contact Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e0; Contact Material: BERYLLIUM COPPER;
851-
851- by Mill-max Mfg is a BOARD CONNECTOR with 1.27mm Terminal Pitch, SOLDER Termination Type, and MALE Contact Gender. It is used in Headers & Edge Type Connectors for STRAIGHT Mounting on PCBs.
5-146280-6
TE Connectivity 5-146280-6 is a board connector with 0.1" pitch, liquid crystal polymer insulator, and 3A signal current rating. It has a temperature range of -55 to 125°C and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable male connectors with solder termination on rectangular PCB patterns.
DF11-14DP-2DSA(01)
Hirose Electric
DF11-14DP-2DSA(01) by Hirose Electric is a 14-contact board connector with a mating contact pitch of 0.079 inches. It has a max operating temperature of 85°C and is suitable for commercial applications.
746-068-520-601
Edac
Edac 746-068-520-601 is a 68-contact card edge connector with 0.125" pitch, suitable for PCB mounting. It features a dielectric voltage of 1500VAC, insulation resistance of 5Gohm, and operating temperatures from -40 to 105°C. Ideal for applications requiring high current signal transmission in black insulator color with UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MMS-102-02-F-SH-TR
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Total No. of Contacts: 2;
MMS-110-01-L-SV
The Samtec MMS-110-01-L-SV is a board connector with 10 contacts, featuring a mating contact pitch of 0.079", TIN over nickel termination finish, and liquid crystal polymer insulator. It has a rated current of 3.9A and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
MMS-110-01-L-SV-01
The Samtec MMS-110-01-L-SV-01 is a board connector with 9 contacts, rated for 3.9A signal current. Featuring a mating contact pitch of 0.078", it has an insulation resistance of 5Gohm and operates b/w -55°C to 125°C. Ideal for applications requiring durable connectors with high insulation resistance and temperature tolerance.
MMS-110-01-L-SV-10
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Maximum Operating Temperature (Cel): 125;
MMS-114-02-L-SH-TR
Samtec's MMS-114-02-L-SH-TR is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring liquid crystal polymer insulator and tin finish with nickel barrier, it operates b/w -55°C to 125°C. With right-angle mounting and surface mount termination, this polarized housing connector offers reliable signal current of 3.9A.
MMS-107-02-L-DV
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Minimum Operating Temperature: -55 Cel;
MMS-125-01-L-DV
Samtec's MMS-125-01-L-DV is a 50-contact, 2-row board connector with a mating contact pitch of 0.079". Featuring matte tin termination and liquid crystal polymer insulator, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, polarized housing with gold finish contacts.
MMS-104-02-L-DV-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; JESD-609 Code: e3; Termination Type: SURFACE MOUNT;
MMS-104-02-L-DV-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: .338 inch;
MMS-104-02-L-DV-A-K
Samtec's MMS-104-02-L-DV-A-K is a 2-row, 8-contact board connector with phosphor bronze contacts and gold mating finish. It features surface mount termination, tin contact finish with nickel barrier, and a terminal pitch of 2mm. Ideal for applications requiring straight mounting style in headers & edge type connectors.
MMS-104-02-L-DV-A-K-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
MMS-104-02-L-DV-A-M-TR
Samtec's MMS-104-02-L-DV-A-M-TR is a 2-row, 8-contact board connector with gold mating finish. With a dielectric voltage of 1050VAC and insulation resistance of 5Gohm, it suits applications requiring high current signal ratings up to 3.9A. The surface-mount termination type and phosphor bronze contact material make it ideal for straight mounting on PCBs with a pitch of 2mm.
MMS-104-02-F-DV-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Mixed Contacts: NO;
MMS-110-02-S-SV-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
MMS-120-01-L-DV
Samtec MMS-120-01-L-DV is a 40-contact, dual-row board connector with 0.079" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, gold mating contact finish over nickel, and tin termination with nickel barrier. Operating temperature range from -55 to 125°C makes it versatile for various PCB designs.
MMS-121-02-L-DV
Samtec's MMS-121-02-L-DV is a 2-row, 42-contact board connector with a mating contact pitch of 0.079". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, polarized housing design and surface mount termination.
MMS-121-02-L-DV-K-TR
Samtec's MMS-121-02-L-DV-K-TR is a 2-row, 42-contact board connector with phosphor bronze contacts and gold mating finish. It features surface mount termination with tin contact finish and nickel barrier. Ideal for board mounting applications requiring a pitch of 2mm, especially in electronics and telecommunications industries.
MMS-103-02-L-DV-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .157 inch;
MMS-104-01-L-SH-01
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1050VAC; No. of Connectors: ONE; No. of Rows Loaded: 1;
MMS-104-02-F-DV-A-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved