Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's HLE-102-02-F-DV-BE-LC is a 2-row, 4-contact board connector with a mating contact pitch of 0.1". Featuring liquid crystal polymer insulator and tin finish with nickel barrier, it operates b/w -55°C to 125°C. Ideal for applications requiring high current signal transmission on PCBs with split board lock mounting option.
Median Price
$1.050
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Continental Prestige Electronics
$1.029
Argo Parts USA
Bastille Electronics
$0.998
$0.948
$0.934
AZTECH Wire
$9.659
Close contact pitch allows for high-density connections on the board.
Compact body size saves space on the PCB.
Small body width also contributes to space-saving on the board.
Tin finish with Nickel barrier ensures reliable and durable connections.
Optimal depth for secure and stable attachment on the board.
High-quality insulator material provides excellent electrical insulation and thermal performance.
Dual row design allows for increased connectivity options.
High operating temperature range ensures performance in various environments.
Wide temperature range makes this product suitable for extreme conditions.
Thin plating layer ensures minimal signal loss and good conductivity.
UL-rated for high flammability resistance, ensuring safety in case of fire.
High signal current rating allows for reliable transmission of signals.
Neutral color blends well with various PCB designs.
Adequate number of contacts for most connectivity requirements.
Aligned with industry-standard spacing for easy integration with existing systems.
Standard terminal pitch makes it compatible with a wide range of devices.
Female contacts ensure secure mating with male connectors.
Straight mounting style simplifies installation on the board.
Headers & Edge Type Connectors HLE-102-02-F-DV-BE-LC attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Termination Contact Finish:
Contact Gender:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
HLE-102-02-F-DV-BE-LC Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
PIC18F4550-I/ML
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
DF19G-20P-1H(52)
Hirose Electric
DF19G-20P-1H(52) by Hirose Electric is a 20-contact FFC/FPC connector with 0.93"x.065"x.224" dimensions, POLYAMIDE insulator, and UL 94V-0 flammability rating. Ideal for board mounting in applications requiring right angle receptacle connectors with square pin sockets.
22-03-5045
Molex
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
PH-R-10
Morethanall
PH-R-10 by Morethanall is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring brass contacts with AU finish, it has an insulation resistance of 1G ohm and can withstand up to 800VAC. With a temperature range of -25 to 85°C, this right-angle receptacle connector is ideal for PCB mounting.
XHP-2-E
J S T Mfg
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
307-074-422-208
Edac
Edac 307-074-422-208 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. With UL94V-0 flammability rating, it's ideal for applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
S6B-XH-SM4-TB(LF)(SN)
S6B-XH-SM4-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with brass contacts and tin finish. It has a terminal pitch of 2.5mm, suitable for surface mount applications in electronics for right-angle mounting on boards.
5-146280-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 6; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
66506-320LF
Amphenol Communications Solutions
Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.
307-074-422-268
Edac 307-074-422-268: Card edge connector with 74 contacts, 0.156" pitch, and 5A signal rating. Ideal for PCB applications requiring high insulation resistance (5000000000 ohm) and dielectric voltage withstand (2545VAC). Operating temperature range from -40 to 105 °C.
503480-0600
The Molex 503480-0600 is a FFC/FPC connector with a mating contact pitch of 0.020 inch and insulation resistance of 50M ohm. It is commonly used in board mounting applications, has a max operating temperature of 85°C, and offers a durability of 10 cycles.
M50-3600542R
Harwin Plc
The Harwin PLC M50-3600542R is a 10-contact female board connector with a mating contact pitch of 0.05", ideal for PCB applications. Featuring tin finish with nickel barrier, it offers high insulation resistance of 1 Gohm and operates b/w -40°C to 105°C. With durability up to 300 cycles, this UL-rated connector is suitable for commercial use in various electronic devices.
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
PHR-4
PHR-4 by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current rating, and POLYAMIDE66 insulator material. It has a dielectric voltage of 800VAC and operates b/w -25 to 85°C. Ideal for applications requiring a polarized housing with 4 contacts in cable mounting setup.
22-27-2051
The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
2-640456-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Termination Type: SOLDER; Mating Contact Finish: TIN;
43645-0300
The Molex 43645-0300 is a board connector with a mating contact pitch of 0.118". It has a body length of 0.388" and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in commercial applications and has a max operating temperature of 105°C.
1939115-1
TE Connectivity
TE Connectivity 1939115-1 is a PCB connector with 9 contacts, rated at 0.5A. It features liquid crystal polymer insulator, right angle mounting style, and surface mount termination type. Ideal for commercial applications requiring a male contact gender and rectangular PCB contact pattern.
DF11-16DS-2C
DF11-16DS-2C by Hirose Electric is a 16-contact board connector with 0.079" pitch, rated for 2A signal current. It features a dielectric voltage of 650VAC and insulation resistance of 1Gohm, suitable for commercial applications requiring durable connectors with crimp terminations.
43025-0600
The Molex 43025-0600 is a board connector with 6 contacts, rated at 2.5A signal current. It features a 0.388" body length, 0.326" width, and 0.551" depth made of POLYAMIDE insulator material. With UL Flammability Code 94V-0, it operates b/w -40 to 105°C and is ideal for commercial applications requiring high insulation resistance up to 1Gohm.
BM04B-ACHSS-A-GAN-TF(LF)(SN)
BM04B-ACHSS-A-GAN-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and GOLD OVER NICKEL finish. It has a terminal pitch of 1.2mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLE-102-02-F-DV-BE-TR
Samtec
Samtec's HLE-102-02-F-DV-BE-TR is a 2-row, 4-contact board connector with a mating contact pitch of 0.1". Featuring Beryllium Copper contacts plated with Gold Flash, it operates b/w -55°C to 125°C. Ideal for PCB applications requiring a compact design and high current signal transmission up to 4.1A.
HLE-102-02-F-DV-BE
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; JESD-609 Code: e3; Additional Features: TIGER BEAM CONTACT;
HLE-102-02-F-DV-BE-LC-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: SOCKET; Contact Pattern: RECTANGULAR;
HLE-102-02-F-DV-LC-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO; Body Width: .2 inch;
HLE-102-02-F-DV-BE-LC-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: SURFACE MOUNT; Contact Style: SQ PIN-SKT;
HLE-102-02-F-DV-BE-FR
Samtec's HLE-102-02-F-DV-BE-FR is a 2-row, 4-contact board connector with a mating contact pitch of 0.1 inch. It features a liquid crystal polymer insulator and can operate in temperatures ranging from -55 to 125°C. This connector is commonly used for surface mount applications requiring high current signal connections.
HLE-107-02-L-DV-TE
Samtec's HLE-107-02-L-DV-TE is a 2-row, 14-contact board connector with liquid crystal polymer insulator. It features tin termination with nickel barrier, gold mating contact finish, and beryllium copper contacts. Ideal for applications requiring a rated current of 4.1A in temperatures ranging from -55 to 125°C.
HLE-114-02-S-DV-BE-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Empty Shell: NO; PCB Contact Row Spacing (mm): 5.44;
HLE-108-02-F-DV-BE-A-K-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Empty Shell: NO; No. of Rows Loaded: 2;
HLE-108-02-F-DV-BE
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.54; PCB Contact Pattern: RECTANGULAR;
HLE-108-02-F-DV-BE-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: BOARD; Body or Shell Style: SOCKET;
HLE-108-02-F-DV-BE-A-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Rated Current - Signal: 4.1 A; PCB Contact Pattern: RECTANGULAR;
HLE-108-02-F-DV-BE-LC
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Depth: .144 inch; UL Flammability Code: 94V-0;
HLE-115-02-F-DV-BE-A-P-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 5.44; Plating Thickness (inch): 3u;
HLE-108-02-F-DV-BE-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: TIGER BEAM CONTACT; DIN Conformance: NO;
HLE-108-02-F-DV-BE-K
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; MIL Conformity: NO; Mating Contact Row Spacing (inch): 0.1;
HLE-108-02-F-DV-BE-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT; Filter Feature: NO;
HLE-107-02-F-DV-BE-A-K-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Finish: GOLD (3); Mating Contact Row Spacing (inch): 0.1;
HLE-107-02-F-DV-BE-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO; Insulator Color: BLACK;
HLE-102-02-F-DV-TE-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Terminal Length: .09 inch; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved