Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's FTS-105-01-L-DV-A-P is a 2-row, 10-contact male board connector with Tin-Nickel finish. Featuring a terminal pitch of 1.27mm and UL94V-0 flammability rating, it is ideal for surface mount applications requiring straight mounting style.
Median Price
$3.022
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.330
100+ parts
-
1k+ parts
$1.520
10k+ parts
$1.300
Adafruit Industries
$5.816
$5.526
Master Electronics
$2.680
$2.240
$1.610
Verical
$3.363
$3.058
Nova Conductors
$2.002
Vyrian
Diverse Electronics
Electro Sonic
$1.697
$1.489
$0.804
IBS Electronics
$2.442
$1.579
$1.138
Corohmni
$1.226
Continental Prestige Electronics
$1.962
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$5.482
Advanced Electronics
The use of Tin with Nickel barrier ensures excellent conductivity and corrosion resistance, making this product durable and reliable.
Having 2 rows loaded allows for a higher number of connections, providing more options for connecting components or devices.
Specifically designed for board connections, ensuring a secure and stable connection between the board and other components.
With a high flammability rating of 94V-0, this product meets safety standards and regulations, making it a reliable choice for various applications.
Having 10 contacts allows for multiple connections to be made, making this product versatile and suitable for a wide range of applications.
Designed specifically for board mounting, ensuring a secure and stable connection to the board for optimal performance.
With a small terminal pitch of 1.27mm, this product is suitable for applications requiring precision and compact connections.
Surface mount termination allows for easy and efficient installation, making this product convenient to use in various applications.
Male contacts are commonly used in electronic connections, ensuring compatibility with various components and devices.
The straight mounting style provides a simple and secure installation process, ensuring a stable connection for reliable performance.
Headers & Edge Type Connectors FTS-105-01-L-DV-A-P attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Connector Type:
Termination Contact Finish:
Contact Gender:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
FTS-105-01-L-DV-A-P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
75869-131LF
Amphenol Communications Solutions
75869-131LF by Amphenol is a 2-row board connector with 6 contacts, rated at 1A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 20Gohm and operates b/w -65 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
DF40C-100DS-0.4V(57)
Hirose Electric
DF40C-100DS-0.4V(57) by Hirose Electric is a 2-row, 100-contact board stacking connector with liquid crystal polymer insulator. Featuring 0.016" mating contact pitch and 100VAC dielectric voltage, it operates b/w -35°C to 85°C. Ideal for applications requiring high durability and signal current of 0.3A, such as PCB connections in electronics industry.
1658621-1
TE Connectivity 1658621-1 is a dual-row board connector with 10 contacts, 0.1" pitch, and polyethylene insulation. It operates b/w -65 to 105°C, rated at 1A signal current, suitable for ribbon cable termination in commercial applications.
823-22-020-10-000101
Mill-max Mfg
Mill-max Mfg 823-22-020-10-000101 is a 20-contact male board stacking connector with gold over nickel finish. Featuring 0.1" mating contact pitch, it has a 1" body length and 0.2" width. Ideal for PCB applications requiring reliable connections in tight spaces.
75869-101LF
75869-101LF by Amphenol is a 2-row board connector with 10 contacts. It features a mating contact pitch of 0.1", insulation resistance of 20Gohm, and dielectric voltage withstand of 1414VAC. Ideal for commercial applications requiring reliable signal connections in PCBs with operating temperatures from -65 to 125°C.
61306421021
Wuerth Elektronik & Kg
Wurth Elektronik 61306421021 is a 64-contact board connector with 0.1" pitch, suitable for commercial applications. It features gold over nickel termination, polybutylene terephthalate insulator, and operates b/w -40 to 125°C. Ideal for PCBs requiring reliable signal transmission at up to 3A current rating.
B2PS-VH
J S T Mfg
B2PS-VH by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This UL 94V-0 rated connector is commonly used in applications requiring secure male connections.
DTM06-6S
DTM06-6S by TE Connectivity is a 2-row loaded board connector with a body length of 1.185", width of 0.6", and depth of 0.817". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used in applications requiring a polarized housing, such as cable mounting with strain relief.
1-1473005-1
TE Connectivity 1-1473005-1 is a PCMCIA connector with 200 contacts, rated at 0.5A. It features POLYETHYLENE insulator, UL94V-0 flammability code, and operates b/w -55 to 85°C. Ideal for board mounting applications requiring a right angle socket with surface mount termination.
472192001
Molex 472192001 is a PCB connector with 0.043" mating contact pitch, 0.535" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a durable, right angle mounting receptacle for commercial reliability.
VHR-3N-BL
VHR-3N-BL by J S T Mfg is a 3-contact BOARD CONNECTOR with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation material, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector offers reliable performance with a polarization key and blue insulator color.
47553-0001
47553-0001 by Molex is a PCB connector with 0.1" pitch, gold over nickel finish, and 6 contacts. Ideal for commercial applications, it has a temperature range of -30 to 85°C and offers durability up to 2500 cycles.
SHF-105-01-L-D-SM
Samtec
SHF-105-01-L-D-SM by Samtec is a 2-row board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 1.75A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
B4PS-VH(LF)(SN)
B4PS-VH(LF)(SN) by J S T Mfg is a 4-contact board connector with a mating contact pitch of 0.156 inches. It has a body length of 0.621 inch and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in applications requiring a right angle mounting style and solder termination type.
TSW-104-07-T-S
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
2-5767004-2
TE Connectivity 2-5767004-2 is a board stacking connector with 39 contacts, rated at 11.5A for signal current. It features a mating contact pitch of 0.025", insulation resistance of 2M ohm, and dielectric voltage withstand of 500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55 to 125°C.
5025700893
Molex 5025700893 is a PCB connector with 0.043" pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for board mounting applications, featuring liquid crystal polymer insulator material and right angle mounting style. Suitable for commercial use with 8 contacts, rated at 0.5A signal current and durability of 10000 cycles.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
DF11-18DS-2C
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
DF11-18DP-2DSA(01)
DF11-18DP-2DSA(01) by Hirose Electric is a 2-row, 18-contact board connector with gold termination finish. It offers a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring durability, reliability, and signal current rating up to 2A in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FTS-105-01-L-DV-P-TR
Samtec FTS-105-01-L-DV-P-TR is a 10-contact board connector with 0.05" mating pitch, suitable for commercial applications. It features gold over nickel finish, liquid crystal polymer insulator, and matte tin termination. Ideal for PCBs with 1.27mm terminal pitch and operating temperatures from -55 to 125°C.
FTS-105-01-L-DV-P
Samtec FTS-105-01-L-DV-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable signal transmission on PCBs with a terminal pitch of 1.27mm.
FTS-105-01-L-DV-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Mating Contact Finish: GOLD OVER NICKEL; MIL Conformity: NO;
FTS-105-01-L-DV
Samtec's FTS-105-01-L-DV is a 10-contact board connector with 0.05" mating pitch, TIN over nickel finish, and liquid crystal polymer insulator. It operates b/w -55°C to 125°C, ideal for commercial applications requiring a rated signal current of 1.75A in a straight male contact style with surface mount termination.
FTS-105-01-L-DV-A
Samtec's FTS-105-01-L-DV-A is a 10-contact, 2-row board connector with Tin-Nickel finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications, this male connector is designed for straight mounting on boards.
FTS-105-01-L-DV-A-P-TR
Samtec's FTS-105-01-L-DV-A-P-TR is a 10-contact, 2-row male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm, UL94V-0 flammability rating, and surface mount termination. Ideal for applications requiring straight mounting on boards.
FTS-105-01-F-DV-P-TR
Samtec's FTS-105-01-F-DV-P-TR is a 10-contact board connector with 0.05" mating contact pitch, suitable for surface mount applications. Featuring gold flash over nickel finish and phosphor bronze contacts, it has a body width of 0.135" and depth of 0.05", making it ideal for two-row loaded configurations.
FTS-105-01-L-DV-FR
Samtec FTS-105-01-L-DV-FR is a 10-contact board connector with 0.05" pitch, suitable for applications requiring high insulation resistance of 5Gohm and dielectric voltage withstand of 280VAC. With male contact gender and surface mount termination, it offers durability of 500 cycles in a compact design for PCBs with rectangular contact pattern.
FTS-105-01-L-DV-P-FR
BOARD CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
FTS-110-01-L-DV
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .034 inch;
FTS-105-01-F-DV-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; Contact Material: PHOSPHOR BRONZE; DIN Conformance: NO;
FTS-105-01-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; MIL Conformity: NO;
FTS-105-01-F-DV-P
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; DIN Conformance: NO; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
FTS-110-01-L-D
Samtec's FTS-110-01-L-D header connector features a 0.05" mating contact pitch, suitable for PCBs with 1.27mm row spacing. With a rated current of 1.75A, this male connector has a total of 20 contacts and operates b/w -55°C to 125°C, making it ideal for commercial applications requiring reliable signal transmission.
FTS-105-01-F-DV-A-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mounting Type: BOARD; JESD-609 Code: e3;
FTS-105-01-F-DV-A-TR
Samtec's FTS-105-01-F-DV-A-TR is a 10-contact, 2-row board connector with Tin (Sn) finish. Featuring a terminal pitch of 1.27mm and UL 94V-0 flammability rating, it is ideal for surface mount applications requiring male contact gender in straight mounting style.
FTS-105-01-F-DV-P-FR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; JESD-609 Code: e3; Terminal Pitch (mm): 1.27;
FTS-110-01-L-DV-P-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Finish: TIN OVER NICKEL;
FTS-106-01-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Additional Features: LOW PROFILE; Contact Material: PHOSPHOR BRONZE;
FTS-105-01-LM-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 1.27; IEC Conformity: NO; Mounting Type: BOARD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved