Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Samtec FFSD-13-S-71.00-01-N is a 26-contact, dual-row board connector with termination contact finish of TIN over Nickel. It features Beryllium Copper contacts and Gold over Nickel mating finish. Ideal for cable mounting applications requiring IDC termination, especially in headers & edge type connectors.
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
1k+ parts
10k+ parts
Continental Prestige Electronics
Argo Parts USA
Aranea Global
The TIN over Nickel finish provides excellent corrosion resistance and ensures a durable connection, making this product suitable for long-term use.
Having 2 rows loaded allows for a higher number of contacts to be accommodated, providing more connectivity options and versatility for various applications.
The board connector type ensures a secure and reliable connection to a printed circuit board, making it a suitable choice for electronics applications.
Beryllium Copper is known for its excellent conductivity and resilience, making it an ideal choice for ensuring low contact resistance and long-lasting performance.
The Gold over Nickel finish on the mating contacts provides superior conductivity and prevents oxidation, ensuring a stable and reliable connection.
With a total of 26 contacts, this product offers ample connectivity options, making it suitable for applications that require multiple connections.
The cable mounting type allows for easy installation and connection to a cable, providing flexibility in placement and usage.
The insulation displacement connection (IDC) termination type makes it easy to connect wires without the need for stripping or soldering, simplifying the installation process.
The female contact gender ensures compatibility with male connectors, offering versatile connectivity options and allowing for the creation of custom cable assemblies.
Headers & Edge Type Connectors FFSD-13-S-71.00-01-N attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Termination Type:
Total No. of Contacts:
FFSD-13-S-71.00-01-N Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Dc Components
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
Fairchild Semiconductor
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
61301011121
Wuerth Elektronik & Kg
61301011121 by Wurth Elektronik is a board connector with 10 contacts, rated at 3A signal current. Featuring gold over nickel termination finish, it has a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
SSM-116-L-SV
Samtec
SSM-116-L-SV by Samtec is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in applications requiring high temperature resistance and surface mount termination.
B6B-PH-K-S(LF)(SN)
J S T Mfg
B6B-PH-K-S(LF)(SN) by J S T Mfg is a 6-pin board connector with a mating contact pitch of 0.079 inches and insulation resistance of 1,000,000,000 ohms. It is commonly used in applications requiring a straight mounting style and press fit termination type.
VHR-4N
VHR-4N by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC voltage withstand, and -25 to 85°C operating range. Ideal for cable mounting applications, it features POLYAMIDE insulation, UL94V-0 flammability rating, and FEMALE SQ PIN-SKT contacts.
746-060-520-601
Edac
Edac 746-060-520-601 is a CARD EDGE CONNECTOR with 60 contacts, rated at 3A signal current. It has a mating pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications requiring high reliability in temperatures ranging from -40 to 105°C.
61306421021
Wurth Elektronik 61306421021 is a 64-contact board connector with 0.1" pitch, suitable for commercial applications. It features gold over nickel termination, polybutylene terephthalate insulator, and operates b/w -40 to 125°C. Ideal for PCBs requiring reliable signal transmission at up to 3A current rating.
ASP-134486-01
Samtec ASP-134486-01 is a 10-row, 400-contact board connector with 0.05" pitch and gold over nickel finish. It features liquid crystal polymer insulator, surface mount termination, and polarized housing for commercial applications requiring high reliability.
B04B-PASK(LF)(SN)
B04B-PASK(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" mating contact pitch and 800VAC dielectric voltage. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it operates b/w -25 to 85 °C and has UL 94V-0 flammability rating. Ideal for PCB applications requiring high insulation resistance and rated current of 3A.
22-01-3037
The Molex 22-01-3037 is a board connector with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has a durable design with removable contact blocks and polarization key for easy assembly. With an insulation resistance of 1Gohm and operating temperature range from -40 to 105°C, it is ideal for commercial applications requiring reliable connections.
50-57-9402
The Molex 50-57-9402 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.199 inch. It has an insulation resistance of 10^10 ohm and is commonly used in commercial applications requiring a reliable, polarized housing for signal currents up to 3 A.
22-03-2031
Molex 22-03-2031 is a BOARD CONNECTOR with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has an insulation resistance of 50Gohm and operates b/w -40 to 75°C. Ideal for commercial applications, this connector uses solder termination and has a durability of 25 cycles.
MEM2075-00-140-01-A
Global Connector Technology
MEM2075-00-140-01-A by Global Connector Technology is a PCB connector with 8 contacts, 0.043" pitch, and 1u plating thickness. It has a temperature range of -25 to 85°C and insulation resistance of 1Gohm. Ideal for applications requiring durable connectors with high mating cycles in electronics manufacturing.
640456-4
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mounting Type: BOARD; Terminal Pitch (mm): 2.54;
53047-0210
Molex 53047-0210 is a board connector with 2 contacts, 1.25mm terminal pitch, and 0.049" mating contact pitch. Ideal for commercial applications requiring a polarized housing, solder termination, and UL94V-0 flammability rating.
HTSW-104-07-G-S
Samtec's HTSW-104-07-G-S is a 4-contact board connector with gold-plated phosphor bronze contacts. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and operates b/w -55°C to 125°C. Ideal for commercial applications, this header connector has a solder termination type and UL94V-0 flammability rating.
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
50-57-9406
Molex 50-57-9406 is a board connector with 0.1" pitch, suitable for commercial applications. It features a 3A signal current rating, GLASS FILLED POLYESTER insulator, and operates b/w -40 to 105°C. Ideal for cable mounting with crimp termination, this connector has a total of 6 contacts in a polarized housing design.
2-640456-4
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: TIN; No. of Rows Loaded: 1; Mounting Type: BOARD;
FTSH-105-01-L-DV-TR
The Samtec FTSH-105-01-L-DV-TR is a 2-row board connector with a contact pitch of 0.05". It features phosphor bronze contacts plated with gold over nickel, suitable for commercial applications. With a temperature range from -55°C to 125°C and UL94V-0 flammability rating, it offers reliable performance in various electronic devices.
1065
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Width: .3 inch; Contact Pattern: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FFSD-25-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Mounting Type: CABLE;
FFSD-08-D-10.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: SOCKET; Mating Contact Finish: GOLD (10) OVER NICKEL (50); Mixed Contacts: NO;
FFSD-05-D-10.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; No. of Rows Loaded: 2; Additional Features: POLARIZED;
FFSD-10-D-10.00-01-N
The Samtec FFSD-10-D-10.00-01-N is a 20-contact, dual-row board connector with female contact gender and gold mating finish. It features beryllium copper contacts terminated with tin and nickel, ideal for IDC cable mounting applications. This socket-style connector is designed for headers & edge type connections in electronic devices.
FFSD-13-S-01.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; UL Flammability Code: 94V-0; Mounting Type: CABLE;
FFSD-12-S-02.00-01-S-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Mixed Contacts: NO; Mating Contact Finish: GOLD (10) OVER NICKEL (50);
FFSD-20-S-20.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: CABLE; Mixed Contacts: NO;
FFSD-12-S-30.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Termination Type: IDC;
FFSD-12-S-30.00-01-S-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 24; JESD-609 Code: e3; Additional Features: POLARIZED;
FFSD-20-01-N
Samtec's FFSD-20-01-N is a 2-row, 40-contact board connector with a mating pitch of 0.1". Featuring beryllium copper contacts, it has a body width of 0.12" and depth of 0.2". Ideal for cable mounting applications, this female IDC connector is commonly used in electronic devices requiring reliable connections.
FFSD-13-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BERYLLIUM COPPER; Additional Features: POLARIZED; Total No. of Contacts: 26;
FFSD-20-S-04.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 40; Contact Material: BERYLLIUM COPPER; Termination Type: IDC;
FFSD-06-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Filter Feature: NO; Mounting Type: CABLE;
FFSD-10-S-07.00-01-N-RW
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mixed Contacts: NO; Mounting Type: CABLE;
FFSD-05-S-10.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mating Contact Pitch (inch): 0.1; Mounting Style: STRAIGHT;
FFSD-10-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; MIL Conformity: NO; DIN Conformance: NO;
FFSD-08-01-N
Samtec's FFSD-08-01-N is a 2-row, 16-contact BOARD CONNECTOR with FEMALE contacts. It features IDC termination and is designed for CABLE mounting applications. Ideal for projects requiring reliable edge type connectors.
FFSD-05-01-N
Samtec's FFSD-05-01-N is a 2-row BOARD CONNECTOR with 10 contacts made of BERYLLIUM COPPER. It features IDC termination and FEMALE contact gender, suitable for CABLE mounting applications.
FFSD-13-D-10.00-01-N
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 26; MIL Conformity: NO; IEC Conformity: NO;
FFSD-13-S-70.00-01-N-RW
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Total No. of Contacts: 26; Mixed Contacts: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved