Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec EJH-115-01-L-D-TH header connector has 30 contacts with 0.1" pitch, made of phosphor bronze with gold finish. It is a board connector for applications requiring reliable connections in temperatures ranging from -55 to 125°C. The connector features a straight mounting style and solder termination, suitable for commercial use cases.
Median Price
$6.415
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aztec Data Supply Inc.
$3.900
Continental Prestige Electronics
$6.287
Bastille Electronics
$6.094
$5.790
$5.709
AZTECH Wire
$8.606
Corohmni
$10.168
Argo Parts USA
The tight contact pitch allows for a high-density connection, making this product suitable for applications where space is limited.
The longer body length provides more room for connections, ensuring secure and stable connections.
The slim body width saves space on the PCB, ideal for compact designs.
The Tin finish with Nickel barrier provides excellent corrosion resistance and ensures a reliable connection.
The sufficient body depth allows for enough room for secure terminal connections.
Liquid Crystal Polymer offers excellent electrical properties and high temperature resistance, ensuring the durability of the connector.
The 10u plating thickness provides a durable and reliable coating for extended product life.
Phosphor Bronze is known for its excellent electrical conductivity and durability, making it a reliable choice for contacts.
The polarization key ensures proper alignment during mating, preventing reverse connections and avoiding damage.
With a high number of contacts, this connector can support complex circuit connections, making it versatile for various applications.
The square pin and socket contact style provides a secure connection and minimizes the risk of signal loss or disconnection.
Headers & Edge Type Connectors EJH-115-01-L-D-TH attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Polarization Key:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
EJH-115-01-L-D-TH Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
1554216002
Molex
WIRE AND CABLE;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Changzhou Galaxy Century Microelectronics
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BM04B-GHS-TBT(LF)(SN)(N)
J S T Mfg
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
FTSH-105-01-L-DV-K-A
Samtec
Samtec's FTSH-105-01-L-DV-K-A is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel for reliability and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a surface mount termination type on PCBs with rectangular contact patterns.
22-29-2061
The Molex 22-29-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and rated current of 4A. It has a body length of 0.6", body width of 0.23", and operates b/w temperatures of 0 to 75°C. This connector is ideal for applications requiring reliable signal transmission on PCBs in commercial settings.
FTSH-105-01-F-DV-K-P-TR
Samtec's FTSH-105-01-F-DV-K-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
M20-9990446
Harwin Plc
The Harwin PLC M20-9990446 is a board connector with 0.1" mating contact pitch, 3A signal current rating, and -40 to 105°C operating temperature range. It is ideal for commercial applications requiring a durable male receptacle with solder termination and UL flammability rating of 94V-0.
2-640456-2
TE Connectivity
The TE Connectivity 2-640456-2 is a board connector with a mating contact pitch of 0.1", suitable for commercial applications. Featuring a max operating temperature of 105°C, it has 22 contacts and a rated current of 5A. With solder termination and UL94V-0 flammability rating, it offers reliable performance in various electronic systems.
DF3-2P-2DSA(01)
Hirose Electric
DF3-2P-2DSA(01) by Hirose Electric is a 2-contact board connector with 0.079" pitch, gold termination finish, and 650VAC dielectric voltage. Ideal for commercial applications, it has a temperature range of -55 to 105°C and offers high durability with 50 cycles.
B2B-XH-AM(LF)(SN)
B2B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) over Copper (Cu) finish. It has a terminal pitch of 2.5mm and UL Flammability Code of 94V-0. Ideal for board mounting applications requiring reliable male connectors with solder termination.
43645-0600
The Molex 43645-0600 is a board connector with 6 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring durable connections, this header connector has a polyester insulator and UL94V-0 flammability rating.
02R-JWPF-VSLE-S
BOARD CONNECTOR; DIN Conformance: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
DM3AT-SF-PEJM5(42)
The Hirose Electric DM3AT-SF-PEJM5(42) PCB connector features a mating contact pitch of 0.043", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this right-angle male connector has a total of 8 contacts and operates b/w -25°C to 85°C with durability up to 10k cycles.
B8B-PH-K(LF)(SN)
B8B-PH-K(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male SQ PIN-SKT contact style, such as PCB connections in electronics with operating temperatures ranging from -25 to 85 °C.
S3B-XH-A-GU
S3B-XH-A-GU by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It features a terminal pitch of 2.5mm, suitable for right angle mounting applications. This UL 94V-0 rated connector is ideal for various electronic devices requiring secure soldered connections.
FTSH-105-01-F-DV-K-P-FR
The Samtec FTSH-105-01-F-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm and UL flammability rating of 94V-0. Ideal for surface mount applications in electronics requiring high-density connections.
7-215079-8
TE Connectivity 7-215079-8 is a board connector with 0.05" pitch, suitable for headers & edge type connectors. Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, it has 100 V rated voltage and -40 to 105 °C operating temperature range. Ideal for commercial applications requiring a durable, polarized housing design with solder termination.
SM02B-BHSS-1-TB(LF)(SN)
SM02B-BHSS-1-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.138" pitch, 0.295" length, and 0.126" width. Ideal for SURFACE MOUNT applications, it features FEMALE contact gender, BRASS material, and POLYAMIDE insulator.
1-1658621-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e3; Mating Contact Finish: GOLD (15) OVER NICKEL (50)/GOLD FLASH (15) OVER PALLADIUM NICKEL (15); Mixed Contacts: NO;
B2B-XH-A-GU
B2B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and is used for BOARD mounting applications requiring male connectors with solder termination.
HTSW-102-07-L-S
Samtec's HTSW-102-07-L-S is a board connector with 2 contacts, featuring a mating contact pitch of 0.1" and termination finish of TIN over NICKEL. Ideal for commercial applications, it has a temperature range from -55 to 125°C and UL flammability rating of 94V-0.
TSW-102-07-G-S
TSW-102-07-G-S by Samtec is a 0.1" pitch board connector with gold over nickel termination finish. It has a max operating temperature of 125°C and min operating temperature of -55°C. This connector is commonly used in commercial applications and offers reliable performance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EJH-110-02-F-D-SM-LC
Samtec EJH-110-02-F-D-SM-LC header connector features 0.1" contact pitch, LCP insulator, and tin finish with Ni barrier. Ideal for PCMCIA applications, it has 20 contacts in a polarized housing with surface mount termination. Operating from -55°C to 125°C, this male connector is designed for board mounting with locking and eject lever options.
EJH-112-01-L-D-TH
BOARD CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
EJH-108-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Board Mounting Option: SPLIT BOARD LOCK;
EJH-108-02-L-D-SM-LC
PCMCIA CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Mounting Option-1: EJECT LEVER; Insulator Color: NATURAL;
EJH-120-01-L-D-SM
EJH-120-01-L-D-SM by Samtec is a board connector with a mating contact pitch of 0.1 inch and a body length of 2.694 inch. It is commonly used in applications that require surface mount termination and a max operating temperature of 125°C.
EJH-120-01-L-D-RA
EJH-120-01-L-D-RA by Samtec is a 40-contact board connector with a contact pitch of 0.1". It features a liquid crystal polymer insulator, phosphor bronze contact material, and gold mating finish over nickel. Ideal for applications requiring right-angle mounting and solder termination, with an operating temperature range from -55°C to 125°C.
EJH-125-01-L-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO;
EJH-115-02-L-D-SM-LC
BOARD CONNECTOR; Manufacturer Series: EJH-1; Termination Contact Finish: TIN OVER NICKEL;
EJH-108-01-L-D-SM-LC
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Mounting Style: STRAIGHT; Contact Material: PHOSPHOR BRONZE;
EJH-108-01-L-D-SM
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: SQ PIN-SKT;
EJH-113-01-L-D-SM-LC
Samtec EJH-113-01-L-D-SM-LC is a 26-contact board connector with 0.1" pitch, suitable for surface mount termination. Featuring liquid crystal polymer insulator and gold over nickel contact finish, it operates b/w -55°C to 125°C. Ideal for applications requiring high-density connections on PCBs.
EJH-125-02-L-D-SM-LC
Samtec EJH-125-02-L-D-SM-LC is a 50-contact PCMCIA connector with 0.1" pitch, ideal for surface mount termination on boards. Featuring liquid crystal polymer insulator and tin finish with nickel barrier, it operates b/w -55°C to 125°C. With a compact size of 3.194" x 0.39" x 0.505", it suits applications requiring high-density connections in limited spaces.
EJH-111-01-L-D-TH
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
EJH-117-01-L-D-TH
EJH-117-01-L-D-TH by Samtec is a 2-row board connector with a mating contact pitch of 0.1 inch. It has a max operating temperature of 125°C and is suitable for commercial applications.
EJH-108-02-L-D-TH
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Polarization Key: POLARIZED HOUSING; Terminal Length: .12 inch;
EJH-115-01-L-D-SM-LC
Samtec EJH-115-01-L-D-SM-LC is a 30-contact, 2-row board connector with TIN over Nickel finish. Featuring Liquid Crystal Polymer insulator and Phosphor Bronze contacts, it has a mating contact pitch of 0.1 inch. Ideal for applications requiring surface mount termination in PCBs with rectangular contact patterns.
EJH-116-01-S-D-TH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: GOLD; Mounting Type: BOARD; Manufacturer Series: EJH;
EJH-107-02-L-D-RA
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER; Board Mounting Option: SPLIT BOARD LOCK;
EJH-125-01-L-D-RA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.1;
EJH-115-01-L-D-RA
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved