Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Samtec's CLP-126-02-L-D-PA-TR is a 52-contact board connector with liquid crystal polymer insulator, tin finish, and 1.8A signal rating. It features a mating contact pitch of 0.05", suitable for applications requiring durability and reliability in commercial settings at temperatures ranging from -65 to 125°C.
Median Price
$8.908
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Arrow
1+ parts
$7.946
100+ parts
$7.105
1k+ parts
-
10k+ parts
Chip1Stop
$9.870
$5.410
Verical
Nova Conductors
$3.615
Vyrian
Continental Prestige Electronics
$3.543
Argo Parts USA
Netroflash
AZTECH Wire
$12.264
Glotronic Ltd.
Having a small mating contact pitch allows for efficient and precise connections, making this product suitable for applications requiring high-density interconnects.
The specific body length provides a compact form factor while still accommodating multiple rows of contacts, making it ideal for space-constrained environments.
The use of a Tin finish with Nickel barrier ensures reliable and durable connections, making this product suitable for demanding applications where robustness is critical.
With a high maximum operating temperature, this product can withstand elevated temperatures without compromising performance, making it suitable for industrial environments.
Low contact resistance ensures efficient power transmission and minimal signal loss, making this product a reliable choice for high-performance applications.
Headers & Edge Type Connectors CLP-126-02-L-D-PA-TR attributes and parameters. Explore more Headers & Edge Type Connectors devices from Samtec
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
CLP-126-02-L-D-PA-TR Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Founded in 1976, Samtec is much more than just another connector company. We put people first, along with a commitment to exceptional service, quality products and innovative technologies that take the industry further faster. This is enabled by our unique, fully integrated business model, which allows for true collaboration and innovation without the limits of traditional business models. This unique approach allows us to serve customers in 125+ countries with revenues exceeding $1 billion in 2022. We believe that taking care of our customers and our employees is paramount in how we approach our business, and this belief is deeply ingrained throughout Samtec worldwide.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
SM10B-SRSS-TB(LF)(SN)
J S T Mfg
SM10B-SRSS-TB(LF)(SN) by J S T Mfg is a 10-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features tin over copper finish, POLYAMIDE insulator, and operates b/w -25 to 85 °C.
50-57-9010
Molex
The Molex 50-57-9010 is a board connector with 10 contacts, 0.1" pitch, and 0.099" body width. It features glass-filled polyester insulator material and is UL94V-0 rated. Ideal for commercial applications requiring a reliable female SQ pin-skt contact style with crimp termination on cable mounting.
DF11-4DS-2C
Hirose Electric
The Hirose Electric DF11-4DS-2C is a 2-row board connector with 4 contacts, featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for applications requiring a durable socket-style connector with crimp termination, suitable for commercial use in environments ranging from -30 to 85°C.
22-05-2041
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
10067847-001RLF
Amphenol Communications Solutions
Amphenol's 10067847-001RLF is a PCB connector with 11 contacts, rated at 0.5A signal current. Featuring a mating contact pitch of 0.066", it offers high insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for board mounting applications, this durable connector has a plating thickness of 50u and meets UL standards.
DM3AT-SF-PEJM5(40)
The Hirose Electric DM3AT-SF-PEJM5(40) is a PCB connector with 0.043" mating contact pitch, GOLD finish, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a liquid crystal polymer insulator, operates b/w -25 to 85 °C, and offers durability of 10000 cycles.
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
35572-0300
Molex 35572-0300 is a board connector with 3 contacts, 0.098" pitch, and 1000VAC voltage rating. Ideal for commercial applications, it features tin finish contacts, operates b/w -40 to 105°C temperatures, and has UL94V-0 flammability rating.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
22-12-2061
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
70553-0005
Molex 70553-0005 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", matte tin finish, and glass-filled polyester insulator. It is used in applications requiring right-angle mounting on PCBs for reliable commercial connections.
833-87-054-30-001101
Preci-dip Sa
833-87-054-30-001101 by Preci-dip Sa is a 54-contact board connector with 0.079" pitch, suitable for headers & edge type connectors. Featuring Beryllium Copper contacts with AU finish, it offers high durability of 500 cycles and insulation resistance of 10 Gohm. Ideal for applications requiring a mating contact pitch of 0.079", such as commercial electronics systems.
HTSW-102-07-G-S
Samtec
Samtec's HTSW-102-07-G-S header connector features a 0.1" contact pitch, gold over nickel termination finish, and liquid crystal polymer insulator. With a temperature range of -55 to 125°C, it is ideal for board-to-board connections in commercial applications requiring high reliability.
3-6318491-6
TE Connectivity
3-6318491-6 by TE Connectivity is a 2-row board connector with 220 contacts. Featuring a mating contact pitch of 0.02", it has an insulation resistance of 2M ohm and operates b/w -40 to 85°C. Ideal for commercial applications, this male plug connector offers a rated current of 0.5A and durability of 30 cycles.
DT06-3S-EP06
TE Connectivity's DT06-3S-EP06 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for cable mounting applications, it has a polarization key and UL 94V-0 flammability code.
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
B6B-PH-SM4-TBT(LF)(SN)
B6B-PH-SM4-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 6 contacts, COPPER ALLOY material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is used in applications requiring surface mount male connectors for edge type connections.
120591-1
Tyco Electronics Amp
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: PHOSPHOR BRONZE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;
801-43-030-30-001000
Mill-max Mfg
BOARD CONNECTOR; Termination Contact Finish: TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
61201021621
Wuerth Elektronik & Kg
61201021621 by Wurth Elektronik is a board connector with 10 contacts, gold finish, and 3A signal current rating. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CLP-103-02-L-DH-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Reference Standard: UL;
CLP-103-02-L-D-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
CLP-110-02-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO;
CLP-103-02-L-DH
The Samtec CLP-103-02-L-DH is a 2-row board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold finish, suitable for commercial applications. With a body length of 0.167" and termination type as surface mount, it offers reliable connections in PCB designs.
CLP-103-02-L-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 3.23;
CLP-103-02-L-D-BE
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 3.74;
CLP-103-02-L-D-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Plating Thickness (inch): 10u;
CLP-103-02-L-D-A-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
CLP-105-02-F-D-A-P-FR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL;
CLP-105-02-F-DH-TR
Samtec's CLP-105-02-F-DH-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and termination finish of Tin (Sn) with Nickel (Ni). Ideal for surface mount applications on PCBs, this header connector has a body length of 0.267", width of 0.135", and depth of 0.12".
CLP-105-02-F-D-P-TR
Samtec's CLP-105-02-F-D-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features liquid crystal polymer insulator, phosphor bronze contacts with gold flash finish, and surface mount termination. Ideal for commercial applications requiring high reliability and straight mounting style.
CLP-105-02-F-DH-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; PCB Contact Pattern: RECTANGULAR;
CLP-103-02-L-D-BE-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
CLP-105-02-F-D-A-K-FR
Samtec's CLP-105-02-F-D-A-K-FR is a 2-row, 10-contact board connector with Tin (Sn) finish. It has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in various electronic devices.
CLP-105-02-F-D-BE
CLP-107-02-F-D
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Filter Feature: NO;
CLP-103-02-L-D-BE-A
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Insulator Material: LIQUID CRYSTAL POLYMER;
CLP-103-02-L-D-BE-A-TR
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .12 inch;
CLP-105-02-F-D-K-TR
Samtec's CLP-105-02-F-D-K-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features a liquid crystal polymer insulator, phosphor bronze contacts with gold flash finish, and surface mount termination. Ideal for commercial applications requiring reliable connections on PCBs.
CLP-107-02-L-DH
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Additional Features: LOW PROFILE, E.L.P.;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved