Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CL31B222KBCNNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
Median Price
$0.012
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Avnet
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.011
Chip1Stop
$0.060
$0.059
$0.058
Arrow
Verical
Component Electronics Inc.
$0.150
$0.120
$0.100
Flip Electronics
TME
$0.088
$0.040
$0.029
Partservice
$0.108
$0.017
Micros
$0.010
Vyrian
Micros sp.j. W. Kędra i J. Lic
$0.115
$0.018
ACDS - Activité Composants Distribution Service
ComSIT Distribution GmbH
Resion
Connect4Technologies Inc.
LIBRA Elektronik GmbH
Nova Conductors
Ampacity Inc.
$0.051
AZTECH Wire
$9.550
Perfect Parts
SIE Connect GmbH (Excess)
Authorized Procurement Solutions
Glotronic Ltd.
Aranea Global
Continental Prestige Electronics
Argo Parts USA
Ceramic dielectric material provides high stability and reliability, making this capacitor suitable for a wide range of applications.
Rectangular packaging allows for efficient placement on circuit boards and saves space, making it ideal for compact electronic devices.
Multi-layer design increases capacitance in a smaller package, providing high performance in a compact form factor.
Secure packing method ensures protection during transportation and storage, maintaining the quality of the capacitors.
Having only two terminals simplifies the installation process and ensures easy connection in electronic circuits.
Surface-mount technology (SMT) package style enables easy and efficient assembly onto PCBs, saving time and effort during manufacturing.
Wraparound terminal shape provides secure soldering connections, ensuring reliable performance in various operating conditions.
Tolerance of 10% allows for a predictable variation in capacitance, ensuring consistent performance in electronic circuits.
X7R temperature characteristics offer stable capacitance over a wide temperature range, making this capacitor suitable for diverse applications.
High maximum operating temperature of 125°C ensures reliability and durability in demanding environments.
Ceramic capacitors are known for their high reliability, stability, and low losses, making them a popular choice for various electronic devices.
Low minimum operating temperature of -55°C allows for reliable performance in extreme cold conditions.
Temperature coefficient of 15% ensures minimal variation in capacitance with temperature changes, maintaining stable performance over a wide range.
Matte tin finish with nickel barrier provides excellent solderability and corrosion resistance, enhancing the longevity of the capacitor.
Surface-mount design simplifies the assembly process and allows for efficient placement on circuit boards, enhancing overall manufacturing productivity.
Capacitance value of 0.0022 uF meets the requirements of various electronic circuits, offering versatility in design and application.
Rated DC voltage of 50 V ensures compatibility with a wide range of voltage requirements, making this capacitor suitable for diverse electronic devices.
Fixed Capacitors CL31B222KBCNNNC attributes and parameters. Explore more Fixed Capacitors devices from Samsung Electro-mechanics
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
CL31B222KBCNNNC Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - MLCC 15/May/2020
Established in 1973, Samsung Electro-Mechanics has become a remarkable developer and manufacturer of key electronic components not only in Korea but also in other parts of the world. The full name of Samsung Electro-Mechanics in English is referring again to electronics and machinery. Samsung Electro-Mechanics began with a focus on production of audio/video parts and laid the foundation for the technological independence of Korea’s parts industry. In the 1980s, we diversified our business areas into materials and computer parts. Subsequently, in the 1990s, we focused on developing promising next-generation products such as chip parts, mobile communication parts, and optical parts. Since the start of the 2000s, the company has been seeking to further develop strategic technologies and create business synergy based on core technologies of materials, multilayer thin-film molding, and high-frequency circuit design. With this at our core, we are focusing on fostering the business of chip parts, camera modules, communication modules and boards. Samsung Electro-Mechanics will expand its business portfolio through continuous new product development through first-class core products and technology convergence and integration, while at the same time fostering the next-generation growth business and moving forward as a leader in the electronic parts industry.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
EEVFK1J471M
Panasonic EEVFK1J471M is a 470uF Aluminum Electrolytic Capacitor with 63V URdc. It features Tan Delta of 0.08, Leakage Current of 0.2961mA, and Ripple Current of 1057.5mA, making it ideal for automotive applications due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 105°C.
C3225X7R1H106M250AC
TDK
TDK C3225X7R1H106M250AC is a SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7R temperature code. Ideal for surface mount applications, it operates b/w -55 to 125 °C with ±20% tolerance.
EEHZA1H101P
Panasonic EEHZA1H101P is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 28mohm, -55 to 105 °C operating temp range, and AEC-Q200 standard compliance. Ideal for SMT applications requiring high ripple current handling up to 300mA.
0402YC104KAT2A
0402YC104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for applications requiring compact, high-performance capacitors in electronic circuits.
M39006/25-0143
Vishay Intertechnology
Vishay Intertechnology's M39006/25-0143 is a TANTALUM CAPACITOR with 330uF capacitance, 50V URdc, and 0.38 Tan Delta. Ideal for MIL-PRF-39006/25 applications, it operates b/w -55 to 125 °C with a leakage current of 0.009 mA.
0402B104K160CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Capacitance: .1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Series: SIZE(X7R);
GRM1885C1H103JA01D
Murata Manufacturing
GRM1885C1H103JA01D by Murata is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, operating from -55 to 125 °C, making it ideal for SMT applications requiring stable performance in a compact size.
B32620A0682J000
The TDK B32620A0682J000 is a film capacitor with capacitance of 0.0068 uF and rated DC voltage of 1000 V. It has a max operating temperature of 105°C, making it suitable for high-temperature applications in industries like automotive and telecommunications. With a compact rectangular package design, it offers reliable performance in through-hole mounting configurations.
C0603C471J5GACTU
KEMET Corporation
KEMET Corporation's C0603C471J5GACTU is a ceramic capacitor with 0.00047uF capacitance and 50V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
08055C473JAT2A
08055C473JAT2A by KYOCERA AVX is a ceramic capacitor with 0.047uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications due to its compact size (2.01x1.25x0.94mm) and wraparound terminals for easy mounting in various electronic devices.
C0805C225K4RACTU
KEMET C0805C225K4RACTU is a ceramic capacitor with 2.2uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
C2012X7R1A106K125AC
The TDK C2012X7R1A106K125AC is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and surface mounting feature.
C4532X7R1E226M250KC
TDK C4532X7R1E226M250KC is a 22uF ceramic capacitor with 25V URdc. X7R temperature characteristics, -55 to 125 °C operating range, and SMT package make it ideal for surface mount applications in various electronic devices.
ECPU1C105MA5
Panasonic ECPU1C105MA5 is a 1uF film capacitor with 16V URdc. It has -40 to 85 °C operating temperature range and ±20% tolerance. Ideal for SMT applications due to its compact 1210 size, WRAPAROUND terminals, and PLASTIC dielectric material.
CL31B475KBHNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B475KBHNNNE is a 1206 SMT ceramic capacitor with 4.7uF capacitance and 50V URdc. With X7R temp characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring stable performance in a compact surface mount package.
CL31A106KAHNNNE
Samsung Electro-mechanics' CL31A106KAHNNNE is a 1206 SMT ceramic capacitor with 10uF capacitance and 25V URdc. Featuring X5R temp characteristics, it operates b/w -55 to 85 °C, ideal for applications requiring compact size and high capacitance stability. Its matte tin finish ensures reliable performance in various electronic devices.
UUD1H101MNR1GS
Nichicon
Nichicon UUD1H101MNR1GS is a 100uF, 50V aluminum electrolytic capacitor with tan delta of 0.14 and leakage current of 0.05mA. Ideal for surface mount applications in electronics due to its high ripple current rating of 300mA.
T491B106K016AT
KEMET T491B106K016AT is a 10uF, 16V tantalum capacitor with low Tan Delta of 0.06 and high ripple current of 82mA. Ideal for applications requiring compact SMT components with high reliability in temperatures ranging from -55 to 125°C.
08051C103KAT2A
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/25-0052
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CL31B104KBCNNNC
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
CL31B106KBHNNNE
Samsung Electro-mechanics CL31B106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability.
CL31A106KBHNNNE
Samsung Electro-mechanics CL31A106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring stable performance in a compact rectangular package.
CL31A107MQHNNNE
CL31A107MQHNNNE by Samsung Electro-mechanics is a ceramic capacitor with 100uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications in various electronic devices.
CL31B106KAHNNNE
Samsung Electro-mechanics' CL31B106KAHNNNE is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring stable performance in a compact rectangular package.
CL31A106MBHNNNE
CL31A106MBHNNNE by Samsung Electro-mechanics is a 1206 size ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and matte tin terminal finish. Ideal for surface mount applications requiring stable capacitance in a compact rectangular package.
CL31A226KAHNNNE
CL31A226KAHNNNE by Samsung Electro-mechanics is a 1206 SMT ceramic capacitor with 22uF capacitance and 25V URdc. With X5R temp characteristics, it operates b/w -55 to 85 °C, making it ideal for various electronic applications requiring compact surface mount capacitors with high capacitance and voltage ratings.
CL31B105KBHNNNE
Samsung Electro-mechanics CL31B105KBHNNNE is a ceramic capacitor with 1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CL31B106KLHNNNE
Samsung Electro-mechanics' CL31B106KLHNNNE is a 1206 SMT ceramic capacitor with 10uF capacitance and 35V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for applications requiring stable performance in varying temperatures. Its compact size and surface mount feature make it suitable for electronic devices where space is limited.
CL31B225KCHSNNE
Samsung Electro-mechanics CL31B225KCHSNNE is a 1206 SMT ceramic capacitor with 2.2uF capacitance and 100V URdc. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable performance in a compact surface mount package.
CL31B226KPHNNNE
Samsung Electro-mechanics CL31B226KPHNNNE is a ceramic capacitor with 22uF capacitance and 10V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact rectangular package.
CL31B105KCHNNNE
Samsung Electro-mechanics CL31B105KCHNNNE is a 1206 SMT ceramic capacitor with 1uF capacitance and 100V URdc. With X7R temp characteristics, it operates b/w -55 to 125 °C, making it ideal for various electronic applications requiring stable performance in a compact form factor.
CL31A476MPHNNNE
Samsung Electro-mechanics CL31A476MPHNNNE is a ceramic capacitor with 47uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style for surface mount applications.
CL31B225KBHNNNE
CL31B225KBHNNNE by Samsung Electro-mechanics is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for SMT applications requiring compact size and high reliability.
CL31B104KCFNNNE
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CL31B475KAHNNNE
Samsung Electro-mechanics CL31B475KAHNNNE is a ceramic capacitor with 4.7uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications in various electronic devices.
CL31B106KOHNNNE
Samsung Electro-mechanics CL31B106KOHNNNE is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for SMT applications due to its compact rectangular package shape and wraparound terminals.
CL31B102KJHNNNE
CL31B102KJHNNNE by Samsung Electro-mechanics is a ceramic capacitor with 0.001uF capacitance and 2000V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for high-voltage applications requiring stable performance in a compact SMT package.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved