Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
100ZLJ270M12.5X30 by Rubycon is a 270uF, 100V ALUMINUM ELECTROLYTIC CAPACITOR with Tan Delta of 0.08 and Leakage Current of 0.27mA. Ideal for applications requiring high Ripple Current (1200mA) in temperatures ranging from -40 to 105 °C, featuring THROUGH HOLE MOUNT style.
Median Price
$0.800
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
J2 Sourcing AB
VNN
Vyrian
Aranea Global
$0.784
$0.753
Continental Prestige Electronics
Argo Parts USA
AZTECH Wire
$14.634
Authorized Procurement Solutions
Perfect Parts
Aluminum electrolytic capacitors are known for their high capacitance values and voltage ratings, making this product suitable for high-performance applications.
Low tan delta indicates low dielectric losses, ensuring high efficiency and reliability in operation.
Low leakage current minimizes power loss and ensures stable performance over time.
High ripple current rating allows the capacitor to handle fluctuating loads and provide smooth power delivery.
Bulk packaging is cost-effective and convenient for large-scale production and assembly processes.
High operating temperature range ensures reliable performance even in demanding environments.
High capacitance value allows for high energy storage capacity, suitable for applications requiring filtering or energy storage.
Fixed Capacitors 100ZLJ270M12.5X30 attributes and parameters. Explore more Fixed Capacitors devices from Rubycon
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Tan Delta:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
100ZLJ270M12.5X30 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00.20
SB
Production and sales of aluminum electrolytic capacitors Other capacitor manufacture and sales Development, design, manufacture and sales of switching power supply units. Our products, which were developed with our in-house developed materials and equipment as our core technology, contribute to the miniaturization and cost reduction of not only state of art fields but also all electronic circuits as products with the originality required by our customers.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Changzhou Galaxy Century Microelectronics
EU2B-YS303C
Idec
ROTARY SWITCH;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Sangdest Microelectronics (Nanjing)
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
GCJ21BR71A106KE01L
Murata Manufacturing
Murata Manufacturing's GCJ21BR71A106KE01L is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 10% tolerance. It operates b/w -55 to 125 °C and has a rated DC voltage of 10V. Ideal for automotive applications meeting AEC-Q200 standard.
BFC238320683
Vishay Intertechnology
Vishay Intertechnology BFC238320683 is a film capacitor with 0.068 uF capacitance, 630 V rated DC voltage, and 220 V rated AC voltage. Ideal for applications requiring a fixed capacitor with polypropylene dielectric material in through-hole mounting style. Operating temperature range from -55 to 105 °C makes it suitable for various electronic circuits.
GCM1555C1H101JA16D
Murata Manufacturing's GCM1555C1H101JA16D is a ceramic capacitor with capacitance of 0.0001uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
UCL1V101MCL6GS
Nichicon
Nichicon UCL1V101MCL6GS is a 100uF, 35V aluminum electrolytic capacitor with 0.12 Tan Delta and 0.035mA Leakage Current. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and -55 to 105°C operating temperature range.
AR215C104K4R
KYOCERA AVX
AR215C104K4R by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating temperature range, and radial package style. Ideal for applications requiring high reliability in automotive electronics due to AEC-Q200 reference standard compliance.
GA0402Y103KXXAC31G
Vishay Intertechnology's GA0402Y103KXXAC31G is a ceramic capacitor with 0.01uF capacitance, rated for 25V DC voltage. It features X7R temperature characteristics and -55 to 150°C operating range, suitable for surface mount applications in automotive electronics meeting AEC-Q200 standards.
M39006/22-0350
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/25-0220
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Additional Features: RIPPLE CURRENT IS MEASURED AT 85CEL;
GRM188R71A225KE15D
GRM188R71A225KE15D by Murata is a ceramic capacitor with 2.2uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
EEEFK1H470XP
Panasonic
Panasonic EEEFK1H470XP is a 47uF aluminum electrolytic capacitor with 50V rated DC voltage. It features tan delta of 0.10, leakage current of 0.0235mA, and ripple current of 146.25mA. Ideal for automotive applications due to AEC-Q200 reference standard compliance and operating temperature range from -55°C to 105°C.
CL05A475MO5NUNC
Samsung Electro-mechanics
CL05A475MO5NUNC by Samsung Electro-mechanics is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for SMT applications requiring compact size and high reliability.
M39006/25-0248
KEMET Corporation
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/25-0052
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
UMK105B7104KV-FR
Taiyo Yuden
UMK105B7104KV-FR by Taiyo Yuden is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
GRM1555C1H220JA01D
GRM1555C1H220JA01D by Murata is a ceramic capacitor with capacitance of 0.000022uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
C0402C104J4RACTU
KEMET C0402C104J4RACTU is a ceramic capacitor with 0.1uF capacitance, rated at 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C0402C102K5RACTU
KEMET C0402C102K5RACTU is a ceramic capacitor with 0.001uF capacitance, 50V URdc, and X7R temp characteristics. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and high temp range (-55 to 125°C). Suitable for various electronic circuits requiring stable capacitance under harsh conditions.
GCM155R71H102KA37D
Murata Manufacturing's GCM155R71H102KA37D is a ceramic capacitor with 0.001uF capacitance, X7R temperature characteristics, and 10% tolerance. It operates b/w -55 to 125 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
GRM033R71A103KA01D
The Murata Manufacturing GRM033R71A103KA01D is a ceramic capacitor with 0.01uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact components with stable performance.
M39006/22-0565
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
100ZL82MEFC10X20
Rubycon
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 82 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Package Style (Meter): Radial;
100ZLJ330M12.5X35
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
100ZLJ220MG412.5X25
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
100ZLJ220M12.5X25
100ZL100MEFC10X23
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
100ZLJ150MG412.5X20
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
100ZL680MEFC18X40
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 680 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Positive Tolerance: 20 %;
100ZLH100MEFC10X20
100ZLJ390M12.5X40
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 390 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
100ZLJ270M16X20
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 270 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
100ZLJ270MCC16X20
100ZLJ270MCE12.5X30
100ZLJ270MCE16X20
100ZLJ270MKC16X20
100ZLJ270MRX16X20
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 270 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); No. of Terminals: 2;
100ZLJ270MRK12.5X30
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 270 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Polarity: POLARIZED;
100ZLJ270MRK16X20
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 270 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Terminal Finish: TIN;
100ZLJ270MSG16X20
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 270 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Positive Tolerance: 20 %;
100ZLJ270MRI12.5X30
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 270 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Negative Tolerance: 20 %;
100ZLJ270MEFU12.5X30
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved