Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's LTR18EZPJ330 is a 33 ohm fixed resistor with 5% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.75W and operating voltage of 200V, it operates b/w -55 to 155 °C. Its thick film technology and AEC-Q200 reference standard make it ideal for automotive electronics.
Median Price
$0.038
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.190
100+ parts
$0.055
1k+ parts
$0.037
10k+ parts
$0.027
Verical
-
$0.021
Chip1Stop
$0.025
$0.024
Nova Conductors
IBS Electronics
$0.015
ACDS - Activité Composants Distribution Service
Vyrian
Semtec, LLC
Netroflash
$0.026
CoreStaff
$0.100
$0.079
$0.016
Kepictronics
QUARKTWIN TECHNOLOGY LTD
A rated temperature of 70°C ensures reliability and stability in various operating conditions.
Thick film technology provides high power handling capabilities and excellent stability over time.
The rectangular construction allows for easy installation and space-saving on PCBs.
This packing method ensures safe transportation and storage of the resistors.
The 0612 size code indicates a compact yet efficient design, suitable for various applications.
With a resistance value of 33 ohms, this resistor is versatile for different circuit requirements.
The two terminals make it simple to connect the resistor in the circuit accurately.
The SMT package style enables easy surface mounting for efficient PCB assembly.
The wraparound terminal shape provides secure and stable connections in the circuit.
With a maximum operating temperature of 155°C, the resistor can withstand higher temperature environments.
The resistor's minimum operating temperature of -55°C allows for use in various climate conditions.
A temperature coefficient of 200 ppm/°C ensures minimal resistance changes with temperature fluctuations.
The tin over nickel terminal finish offers excellent conductivity and corrosion resistance.
The low height of 0.55mm ensures compatibility with compact PCB designs.
A fixed resistor type provides a stable and constant resistance value in the circuit.
With an operating voltage of 200V, this resistor is suitable for a wide range of applications.
A tolerance of 5% ensures accuracy in resistance values for precise circuit configurations.
The length of 3.2mm offers versatility in placement and installation on PCBs.
The surface mounting type simplifies assembly and reduces overall circuit footprint.
With a rated power dissipation of 0.75W, this resistor can handle moderate power loads efficiently.
Compliant with the AEC-Q200 standard, ensuring high reliability and performance in automotive applications.
The width of 1.6mm allows for easy integration into compact circuit designs.
Fixed Resistors LTR18EZPJ330 attributes and parameters. Explore more Fixed Resistors devices from ROHM
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
LTR18EZPJ330 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.30
SB
8533.21.00.45
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Daco Semiconductor
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
LM358N
RC0402JR-0710KL
Yageo's RC0402JR-0710KL is a fixed resistor with 10000 ohm resistance, 5% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
AC0402FR-0710KL
Yageo's AC0402FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and -55 to 155 °C operating temperature range.
RC0603JR-075K6L
Yageo's RC0603JR-075K6L is a 5600 ohm SMT fixed resistor with 5% tolerance, operating at temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, 0.1 W power dissipation, and matte tin finish. Ideal for applications requiring a compact surface-mount solution with a max voltage of 75 V.
AC0603JR-070RL
Yageo's AC0603JR-070RL is a jumper resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features metal glaze/thick film technology, SMT package style, and matte tin terminal finish. Ideal for automotive applications meeting AEC-Q200 standard.
CRCW040210K0JNEDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0JNEDHP is a fixed resistor with 10000 ohm resistance, 5% tolerance, and 0.2 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and -55 to 155 °C operating temperature range.
CRCW06034K70FKEAC
Vishay Intertechnology's CRCW06034K70FKEAC is a fixed resistor with 4700 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and wide operating temperature range from -55°C to 155°C.
CRCW04023K30FKEDC
Vishay Intertechnology's CRCW04023K30FKEDC is a fixed resistor with 3300 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
RC0805FR-1310KL
Yageo's RC0805FR-1310KL is a 10000 ohm fixed resistor with a tolerance of 1%. It operates at temperatures ranging from -55 to 155 °C and has a max power dissipation of 0.125 W. It is commonly used in surface mount applications requiring precise resistance values.
35214K7FT
TE Connectivity
TE Connectivity's 35214K7FT is a fixed resistor with 4700 ohm resistance, 1% tolerance, and 2W power dissipation. It operates b/w -55°C to 155°C, making it suitable for automotive applications meeting AEC-Q200 standards. With surface mounting type and thick film technology, it offers reliable performance in compact designs.
RC0603FR-077.5RL
Yageo's RC0603FR-077.5RL is a 7.5 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1W and operating voltage of 50V, it operates b/w -55°C to 155°C making it ideal for various electronic circuits requiring precise resistance values.
RC0603FR-073K3L
Yageo's RC0603FR-073K3L is a SMT fixed resistor with 3300 ohm resistance, 1% tolerance, and 0.1W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial controls.
RC0603FR-074K7L
Yageo's RC0603FR-074K7L is a 4700 ohm fixed resistor with a tolerance of 1%. It operates at temperatures ranging from -55 to 155 °C and has a max power dissipation of 0.1 W. It is commonly used in surface mount applications requiring precise resistance values.
ERJ2RKF1003X
Panasonic
The Panasonic ERJ2RKF1003X is a 0402 SMT fixed resistor with a resistance of 100000 ohm and 1% tolerance. Operating voltage is 50V, with a rated power dissipation of 0.1W. Ideal for surface mount applications in electronics requiring precise resistance values.
CRCW060315K0FKEAHP
Vishay Intertechnology's CRCW060315K0FKEAHP is a fixed resistor with 15000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
RC0402FR-0730KL
Yageo's RC0402FR-0730KL is a fixed resistor with 30000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RT0603FRE071KL
Yageo's RT0603FRE071KL is a thin film fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C and has a temperature coefficient of 50 ppm/°C.
CRCW12061M00FKEAC
Vishay Intertechnology's CRCW12061M00FKEAC is a fixed resistor with a resistance of 1M ohm and a tolerance of 1%. It operates at temperatures ranging from -55 to 155 °C and is commonly used in surface mount applications.
RMCF0603FT232R
Stackpole Electronics
RMCF0603FT232R by Stackpole Electronics is a fixed resistor with 232 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
CRCW040227K0FKED
Vishay Intertechnology's CRCW040227K0FKED is a fixed resistor with 27000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating temperature range of -55 to 155 °C.
CRCW0402100RFKED
Vishay Intertechnology's CRCW0402100RFKED is a 100 ohm fixed resistor with METAL GLAZE/THICK FILM tech. Operating voltage of 50V, tolerance of 1%, and temp coef of 100 ppm/°C make it ideal for automotive applications requiring SMT mounting in harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTR18EZPFLR270
ROHM
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .27 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPJLR27
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .27 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
LTR18EZPF1000
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR10EVHFLR220
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .22 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR10EZPJ103
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
LTR10EZPJ223
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
LTR18EZPF3600
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 360 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR100JZPJ3R3
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3.3 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
LTR10EVHFLR120
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .12 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPD1803
ROHM's LTR18EZPD1803 is a fixed resistor with 180k ohm resistance, 0.5% tolerance, and 0.75W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and 200V operating voltage. THICK FILM technology in SMT package with -55 to 155 °C temp range makes it versatile for various electronic designs.
LTR18EZPF20R0
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR10EZPJ472
ROHM's LTR10EZPJ472 is a 4700 ohm fixed resistor with 5% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.25 W and operating voltage of 150 V, it operates b/w -55 to 155 °C making it ideal for automotive electronics due to AEC-Q200 compliance.
LTR18EZPF3601
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3600 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPJ1R5
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
LTR18EZPFL1R00
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPF7502
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 75000 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPFU10L0
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .01 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPF1200
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 120 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR10EZPF1R00
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
LTR18EZPJ181
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 180 ohm; Rated Power Dissipation (P): .75 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved