Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ROHM's BA10324A Op Amp features 7000uV Max Input Offset Voltage, 75dB Nominal CMRR, and 5V Nominal Voltage. Ideal for industrial applications requiring a low bias current of 0.25uA and high voltage gain of 25118.9. With micropower technology, it ensures efficient performance in compact designs.
Median Price
$5.830
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Miltronics Inc.
1+ parts
$0.092
100+ parts
-
1k+ parts
10k+ parts
Component Electronics Inc.
$3.080
$2.310
$2.000
Forefront Electronics and Design
$8.580
Ace Electronics
$10.000
Resion
Vyrian
Bristol Electronics
Dan-Mar Components
ACDS - Activité Composants Distribution Service
VNN
Inland Empire Components Inc.
LIBRA Elektronik GmbH
Lantek
Ashlea Components Ltd
LWI Electronics Inc
Elcom Components
MISTER SPROCKETS
Nova Conductors
Pride Electronics
A2Z Electronics, Inc.
GES GmbH
Ampacity Inc.
$0.410
AZTECH Wire
$1.760
$1.690
$1.660
$1.620
Authorized Procurement Solutions
Kepictronics
Microchip USA
iodParts Technologies Inc.
GreenTree Electronics
Robosynatics
Lucentia Tech
$6.217
$5.757
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Assy Fe
Aranea Global
The plastic/epoxy package body material makes the operational amplifier lightweight and durable, ensuring it can withstand various environmental conditions.
With a high maximum input offset voltage, this operational amplifier can provide accurate signal amplification with minimal error.
The high common mode rejection ratio of 75 dB ensures that the amplifier can suppress common mode noise and provide clean output signals.
The nominal supply voltage of 5V makes this operational amplifier suitable for low power applications, saving energy and reducing heat dissipation.
The bipolar technology used in this operational amplifier results in high input impedance and low output impedance, making it ideal for precision signal processing applications.
Operational Amplifiers (Op Amps) BA10324A attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from ROHM
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Frequency Compensation:
Low-Offset:
Micropower:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
BA10324A Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 30/Jan/2019
Rohm Co Ltd is a Japan-based company that manufactures and distributes electronic components for use in automotive, transportation, medical, healthcare, audiovisual, telecommunications, digital power, computer and peripherals, and home appliance end markets. Its product portfolio includes integrated circuits in memory, amplifiers, switches, data converters, and microcontrollers; discrete semiconductors, such as transistors and diodes; power devices; passive devices, such as resistors and capacitors; and optoelectronic devices.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sensitron Semiconductor
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
EU2B-YS303C
Idec
ROTARY SWITCH;
Itt Semiconductor
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM324N
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2340UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA117KU
LM2902N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LM2904D
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7332MAX/NOPB
Texas Instruments
LM7332MAX/NOPB by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of 5V, offering a unity gain bandwidth of 19MHz. Ideal for automotive applications due to its small outline package and temperature grade.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM324DRG3
LM324DRG3 by Texas Instruments is a quad operational amplifier with 4 functions. It has a max input offset voltage of 9000 uV and low bias current of 0.25 uA @25C. Ideal for applications requiring micropower amplification in commercial temperature grades, with a nominal unity gain bandwidth of 1200 kHz.
OPA2140AIDGKR
OPA2140AIDGKR by Texas Instruments is a low-offset operational amplifier with 120uV max input offset voltage and 140dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, has a unity gain bandwidth of 11MHz, and consumes up to 5.4mA supply current.
OPA2132UA/2K5
OPA2132UA/2K5 by Texas Instruments is a dual operational amplifier with 500uV max input offset voltage and 100dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, has a unity gain bandwidth of 8MHz, and low bias current of 0.00005uA.
LM324DT
STMicroelectronics
LM324DT by STMicroelectronics is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 80 dB. Widely used in applications requiring micropower amplification, it operates at temperatures ranging from 0 to 70 °C.
OPA140AID
OPA140AID by Texas Instruments is an Operational Amplifier with low-offset voltage of 120uV, low-bias current of 0.00001uA, and high common mode rejection ratio of 140dB. Ideal for automotive applications due to its compact size, wide temperature range, and voltage-feedback architecture.
LM2904DR2G
Onsemi
OPA549T
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 11; Package Code: ZIP; Package Shape: RECTANGULAR;
LM358N
INA193AIDBVTG4
Texas Instruments' INA193AIDBVTG4 is a 5-terminal operational amplifier in a small outline, low profile package. With nickel palladium gold finish and gull wing terminal form, it has automotive temperature grade suitability. Its compact dimensions of 2.9mm length, 1.6mm width, and 1.45mm seated height make it ideal for space-constrained applications in automotive electronics.
TLE2022AIDR
TLE2022AIDR by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 450uV, nominal voltage of +/-15V, and min slew rate of 0.42V/us. Ideal for industrial applications requiring high precision and low power consumption in compact designs.
LM358DRG4
LM358DRG4 by Texas Instruments is an Operational Amplifier with 2 functions, VOLTAGE-FEEDBACK architecture, and BIPOLAR technology. It has a Nominal Unity Gain Bandwidth of 700 kHz, Max Input Offset Voltage of 9000 uV, and Nominal Voltage of 5V. Widely used in commercial applications for its high Common Mode Reject Ratio and low Bias Current.
TL072CP
OPA2376AIDGKR
OPA2376AIDGKR by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 5500 kHz, and operates in automotive temperature grade. Ideal for applications requiring precise signal amplification in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BA10324AF-E2
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
BA10358F-E2
BA10358
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BA10324AFV-E2
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: LSSOP; Package Shape: RECTANGULAR;
BA10324AFV
BA10324AF
BA10358N
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved