Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SGA-3363 by RF Micro Devices is a wide band low power RF amplifier with 15.5 dB gain and 50 ohm impedance. It operates from 0 to 5500 MHz, has a max input power of 18 dBm, and requires a 2.6V power supply. This component is ideal for applications requiring high-frequency signal amplification in compact electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Cyclops Electronics Ltd
1+ parts
100+ parts
1k+ parts
10k+ parts
ACDS - Activité Composants Distribution Service
Bristol Electronics
Dan-Mar Components
Extreme Components
Pegasus Components GmbH
Vyrian
Nova Conductors
Cogito LLC
Sunrise Surplus Inc.
Andel Nordic
$6.126
$5.881
AZTECH Wire
$9.372
Kepictronics
Authorized Procurement Solutions
Argo Parts USA
Assy Fe
Continental Prestige Electronics
Bastille Electronics
PLASTIC/EPOXY material provides durability and lightweight design, making the product suitable for various applications.
With a maximum input power of 18 dBm, this amplifier can handle high power levels without distortion, ensuring reliable performance in demanding RF applications.
Having 6 terminals allows for versatile connectivity options, enabling easy integration into different RF systems.
The use of bipolar technology ensures efficient operation and low noise performance, enhancing the overall quality of the amplifier.
With a characteristic impedance of 50 ohm, this amplifier is compatible with standard RF systems, providing seamless integration without the need for additional matching components.
The high gain of 15.5 dB amplifies the input signal with minimal distortion, improving the overall signal strength and quality for precise RF applications.
Supporting a maximum operating frequency of 5500 MHz, this amplifier is ideal for high-frequency RF applications, offering enhanced performance in a wide range of applications.
RF & Microwave Amplifiers SGA-3363 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Rf Micro Devices
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Hy Electronic
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Lite-on Semiconductor
Taitron Components
935363184528
NXP Semiconductors
WIDE BAND LOW POWER; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
HMC311LP3ETR
Analog Devices
Analog Devices' HMC311LP3ETR is a GAAS RF amplifier with 12dB gain, 50 ohm impedance, and 10 dBm CW input power. It operates from 0 to 6000 MHz, drawing 74mA at 5V. Ideal for wideband low-power applications in temperatures ranging from -40°C to +85°C.
XP1050-QJ-0G0T
M/a-com Technology Solutions
XP1050-QJ-0G0T by M/a-com Technology Solutions is a wide band high power RF amplifier with 15 dB gain. It operates b/w 7-9 GHz, handles up to 25 dBm CW input power, and can withstand temperatures from -40 to 85°C. Ideal for applications requiring high power amplification in RF & microwave systems.
QPA9419
Qorvo
RF/Microwave Amplifiers;
CA70-2
Wj Communications
WIDE BAND LOW POWER; Maximum Operating Temperature: 50 Cel; Maximum Input Power (CW): 13 dBm; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 250 MHz; Minimum Operating Frequency: 10 MHz;
HMC409LP4E
Hittite Microwave
NARROW BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Gain: 28 dB;
760
Ttm Technologies
RF/Microwave Amplifiers; No. of Terminals: 8; Package Body Material: METAL; Technology: HYBRID; Screening Level: 38535Q/M;38534H;883B; Maximum Operating Temperature: 125 Cel;
MGA-565P8-BLK
Agilent Technologies
WIDE BAND LOW POWER; Maximum Operating Frequency: 3500 MHz; Maximum Voltage Standing Wave Ratio: 2; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Gain: 20 dB;
HMC635LC4
Analog Devices' HMC635LC4 is a wide band low power RF amplifier with 15 dB gain, operating from 18-40 GHz. It features a max input power of 15 dBm and operates on a 5V supply. Ideal for applications requiring high frequency amplification in RF & microwave systems.
AMMC-6442-W50
Broadcom
AMMC-6442-W50 by Broadcom is a wide band medium power RF amplifier with 20 dB gain. It operates b/w 37-40 GHz, handling up to 20 dBm CW input power. Ideal for RF applications requiring a 50 ohm characteristic impedance and powered by a 5V supply.
HMC451LP3ETR
HMC451LP3ETR by Analog Devices is a GAAS RF amplifier with 12.5 dB gain, operating from 5V supply at frequencies ranging from 5-18 GHz. With a max input power of 10 dBm, it's ideal for wideband low-power applications in RF and microwave systems requiring surface mount components.
HMC634LC4TR
HMC634LC4TR by Analog Devices is a wide band low power RF amplifier with 17 dB gain, operating from 5V supply. It has a frequency range of 5-20 GHz, ideal for RF and microwave applications. With ceramic packaging and surface mounting feature, it offers high performance in temperatures ranging from -40 to 85°C.
CMD291P4
WIDE BAND MEDIUM POWER; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
SMA3103-TL-E
Sanyo Semiconductor
WIDE BAND LOW POWER;
ADL5610ARKZ-R7
ADL5610ARKZ-R7 by Analog Devices is a wide band medium power RF amplifier with a gain of 13.2 dB. It operates in the frequency range of 30 MHz to 6000 MHz and can handle a max input power of 20 dBm. This component is suitable for applications requiring RF amplification in the RF & Microwave field.
MSA-1105-TR1G
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 1300 MHz; JESD-609 Code: e3; Maximum Voltage Standing Wave Ratio: 1.7; Gain: 10 dB;
MW7IC2750NBR1
The NXP Semiconductors MW7IC2750NBR1 is a narrow band high power RF amplifier with a gain of 24 dB. It operates within the frequency range of 2500-2700 MHz and can handle a max input power of 30 dBm. This component is suitable for applications requiring high power amplification in RF and microwave systems.
RDA1005LSR
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 4000 MHz;
HMC960LP4E
Analog Devices' HMC960LP4E is a wide band high power RF amplifier with 0 dB gain, operating from 0 to 100 MHz. It features a surface mount package with 24 terminals and operates b/w -40°C to +85°C. Ideal for applications requiring high power amplification in RF and microwave systems.
HMC606LC5TR
Analog Devices' HMC606LC5TR is a wide band low power RF amplifier with 9.5 dB gain, operating from 2-18000 MHz. It has a max input power of 15 dBm and operates on a 5V supply with 95 mA current draw. Ideal for RF and microwave applications requiring high frequency amplification in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SGA-3563Z
Sirenza Microdevices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 18 dBm;
SGA3563Z
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Gain: 19.5 dB;
SGA3463Z
SGA3463Z by Qorvo is a wide band low power RF amplifier with a gain of 20 dB. It operates at frequencies ranging from 0 MHz to 5000 MHz and can handle a max input power of 18 dBm. This component, made of plastic/epoxy, is suitable for surface mount applications in the RF and microwave field.
SGA-3463Z
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Terminal Finish: Matte Tin (Sn);
SGA-3563
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
SGA-3563 by RF Micro Devices is a wide band low power RF amplifier with a gain of 19.5 dB. It operates at frequencies ranging from 0 MHz to 5000 MHz and has a max input power of 18 dBm. This component, made of plastic/epoxy, is commonly used in RF and microwave applications.
SGA-3363
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; No. of Functions: 1;
SGA-3363-TR1
WIDE BAND LOW POWER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Input Power (CW): 5 dBm; Maximum Operating Frequency: 3600 MHz; Characteristic Impedance: 50 ohm; Gain: 15.5 dB;
WIDE BAND LOW POWER; Gain: 15.5 dB; Maximum Voltage Standing Wave Ratio: 1.2; Maximum Operating Frequency: 3600 MHz; Maximum Input Power (CW): 5 dBm; Characteristic Impedance: 50 ohm;
SGA-3363Z
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Power Supplies (V): 2.6;
SGA3363Z
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Frequency: 5500 MHz;
SGA3363ZSR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP6,.08;
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
SGA3386Z
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
SGA-3386
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 50 ohm;
SGA-3263
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Temperature: -40 Cel;
SGA-3386Z
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: SL,4GW-LD,.085CIR;
SGA3263ZSR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 0 MHz;
SGA3486ZSR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved