Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Transmission Type: DIGITAL; Data Rate: 800 Mbps; Spectral Width: 4 nm; Maximum Operating Wavelength: 1600 nm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fiber Optics - Emitters NDL5728P1 attributes and parameters. Explore more Fiber Optics - Emitters devices from Renesas Electronics
Additional Features:
Built-in Features:
Data Rate:
Maximum Fall Time:
Fiber Optic Type:
Fiber Type:
Mounting Feature:
Maximum Operating Wavelength:
Minimum Operating Wavelength:
Nominal Operating Wavelength:
Rise Time:
Spectral Width:
Minimum Threshold Current:
Transmission Type:
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Thinking Electronic Industrial
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
M39029/58360
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
ROHM
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
NX8530NH469
Renesas Electronics
DFB LASER MODULE EMITTER; Maximum Supply Voltage: 2 V; Supply Current: 100 mA; Communication Standard: ITU-T; Nominal Operating Wavelength: 1547 nm; Body Width: 5.4 inch;
NX6406GH
DFB LASER DIODE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 1.6 V; Minimum Operating Wavelength: 1530 nm; Nominal Supply Voltage: 1.1 V; Maximum Fall Time: .15 ns;
NX8563LA509-CC
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT; Communication Standard: ITU-T; Minimum Return Loss: 3 dB; Built-in Features: ISOLATOR, TEC, THERMISTOR; Minimum Operating Wavelength: 1530 nm;
NX6350EP31
DFB LASER DIODE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 1.8 V; Transmission Type: DIGITAL; Package Style (Meter): CAN; Rise Time: .05 ns;
NX8562LF493-BA
DFB LASER MODULE EMITTER; Mounting Feature: PANEL MOUNT; Body Length/Diameter: 20.83 mm; Transmission Type: DIGITAL; Nominal Operating Wavelength: 1549 nm; Body Height: 7.5 mm;
STL51004G
Infineon Technologies
LASER DIODE EMITTER; Mounting Feature: PANEL MOUNT; Maximum Supply Voltage: 1.5 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
NX8563LA549-CC
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT; Supply Current: 125 mA; Built-in Features: ISOLATOR, TEC, THERMISTOR; Fiber Type: SMF; Package Style (Meter): BUTTERFLY;
NX8531NH597
DFB LASER MODULE EMITTER; Maximum Supply Voltage: 2 V; Minimum Supply Voltage: .9 V; Minimum Return Loss: 3 dB; Minimum Threshold Current: 5 mA; Additional Features: IT ALSO HAVE RETURN LOSS OF 6 DB;
NDL7620P
DFB LASER MODULE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Additional Features: IT ALSO HAVE LASER DIODE BUILTIN FUNCTION; Minimum Threshold Current: 45 mA;
NDL7401P2
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Supply Voltage: 1.3 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Built-in Features: MONITOR PHOTODIODE;
NX8561JC-BA
DFB LASER MODULE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Body Length/Diameter: 25.4 mm; Transmission Type: DIGITAL; Minimum Operating Wavelength: 1505 nm; Built-in Features: TEC, THERMISTOR;
NX8563LF687-BA
DFB LASER MODULE EMITTER; Mounting Feature: PANEL MOUNT; Minimum Threshold Current: 20 mA; Body Width: 12.7 inch; Fiber Type: PMF; Transmission Type: DIGITAL;
STL81005Z
LASER DIODE EMITTER; Mounting Feature: PANEL MOUNT; Maximum Supply Voltage: 1.5 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Spectral Width: 5 nm;
NX8563LAS334-CD-AZ
DFB LASER MODULE EMITTER; Mounting Feature: PANEL MOUNT; Maximum Fall Time: .12 ns; Connection Type: SC/APC CONNECTOR; Minimum Return Loss: 3 dB; Communication Standard: ITU-T;
NDL7051
LASER DIODE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 1.3 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Built-in Features: LASER DIODE, MONITOR PHOTODIODE;
NX6509GH
DFB LASER DIODE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 1.6 V; Nominal Operating Wavelength: 1550 nm; Rise Time: .1 ns; Maximum Fall Time: .15 ns;
NX8563LAS437-CD
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT; Maximum Supply Voltage: 2 V; Terminal Finish: Tin/Lead (Sn/Pb); Supply Current: 125 mA; Body Width: 12.7 inch;
NDL7408P2KD
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Supply Voltage: 1.3 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Transmission Type: DIGITAL;
NX8563LA614-CC
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT; Minimum Threshold Current: 20 mA; Maximum Fall Time: .12 ns; Transmission Type: DIGITAL; Minimum Return Loss: 3 dB;
NX8563LAS429-CC-AZ
DFB LASER MODULE EMITTER; Mounting Feature: PANEL MOUNT; Maximum Fall Time: .12 ns; Communication Standard: ITU-T; Transmission Type: DIGITAL; Minimum Return Loss: 3 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NDL5031P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Spectral Width: 2 nm; Minimum Operating Wavelength: 1290 nm; Package Style (Meter): DIP; Minimum Threshold Current: 20 mA;
NDL5032P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: 0 Cel; Body Length/Diameter: 20.84 mm; Rise Time: .5 ns;
NDL5033P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: 0 Cel; Nominal Operating Wavelength: 1303 nm; Additional Features: IT ALSO OPERATES AT 1270 NM TO 1330 NM WAVELENGTH, IT ALSO HAVE A THRESHOLD CURRENT OF 20 MA, IT ALSO HAVE A SPECTRAL WIDTH OF 6 NM;
NDL5034P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Nominal Operating Wavelength: 1310 nm; Minimum Operating Wavelength: 1290 nm; Rise Time: .5 ns; Built-in Features: LASER DIODE, TEC, THERMISTOR;
NDL5035P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: 0 Cel; Fiber Type: 10/125, SMF; Package Style (Meter): DIP;
NDL5036P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: 0 Cel; Body Length/Diameter: 20.84 mm; Maximum Fall Time: .7 ns;
NDL5071
PULSED LASER DIODE EMITTER; Nominal Operating Wavelength: 1550 nm; Body Length/Diameter: 9.1 mm; Minimum Operating Wavelength: 1520 nm; Minimum Threshold Current: 40 mA; Fiber Type: MMF;
NDL5723P
LASER DIODE MODULE EMITTER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Built-in Features: TEC, LASER DIODE, MONITOR PHOTODIODE; Body Height: 12.16 mm; Spectral Width: 4 nm; Fiber Type: SMF;
NDL5728P
LASER DIODE MODULE EMITTER; Mounting Feature: THROUGH HOLE MOUNT; Fiber Type: SMF; Rise Time: .5 ns; Nominal Operating Wavelength: 1550 nm; Maximum Fall Time: .7 ns;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved