Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Flip Electronics (Authorized)
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Flip Electronics
AZTECH Wire
$17.240
Microchip USA
$54.300
$53.520
$53.130
$52.740
Switching Regulators & Controllers ISL88550AIRZ-T7 attributes and parameters. Explore more Switching Regulators & Controllers devices from Renesas Electronics
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
ISL88550AIRZ-T7 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult DEV EOL 06/Dec/2023
PCN Design/Specification - DFN/QFN Copper Wire Bond Wire 25/Oct/2013
PCN Assembly/Origin - Mult Changes 21/May/2021
PCN Packaging - Label Change-All Devices 01/Dec/2022
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Vishay Semiconductors
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TPS61222MDCKTEP
TPS61222MDCKTEP by Texas Instruments is a switching regulator with 6 terminals, operating at -55 to 125°C. It has a boost switcher config, hysteric current mode control technique, and max freq of 2MHz. Ideal for battery charge controllers in military-grade applications due to its compact size and high efficiency.
LTC1144IS8#PBF
LTC1144IS8#PBF by Analog Devices is a CMOS switched capacitor converter with 8 terminals, operating b/w -40 to 85°C. It has a max input voltage of 18V and nominal input voltage of 15V, suitable for industrial applications. With a small outline package style and surface mount capability, it offers a max switching frequency of 10 kHz.
LMR54410DBVR
LMR54410DBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125°C. It supports input voltages from 4-36V and outputs up to 1A at 28V. With a compact design and pulse frequency modulation control, it's ideal for applications requiring efficient power conversion in limited space.
LM5022MM/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Qualification: Not Qualified;
LM27761DSGT
LM27761DSGT by Texas Instruments is a small outline, heat sink package with 8 terminals. It operates at -40 to 85°C and supports input voltage from 2.7V to 5.5V, outputting up to -1.5V at 0.25A max current. Ideal for industrial applications requiring a switched capacitor inverter with pulse frequency modulation control technique.
LMZM23601V5SILT
LMZM23601V5SILT by Texas Instruments is a switching regulator with a max output current of 1A and max output voltage of 15V. Ideal for automotive applications, it operates b/w -40 to 125°C, offering a control mode of current-mode PWM. With a compact package style and high switching frequency of 1100kHz, it suits space-constrained designs requiring efficient power management.
LTC3646EDE-1#PBF
LTC3646EDE-1#PBF by Analog Devices is a current-mode switching regulator with 14 terminals, operating b/w -40 to 85°C. It has a buck switcher configuration, supporting input voltages from 4V to 40V and output voltage of 5V. Ideal for industrial applications requiring efficient power management in compact spaces.
LM2576T-ADJ
Motorola
SWITCHING REGULATOR; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO; Switcher Config: BUCK;
MC34063ACN
Analog Integrations
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS82130SILT
TPS82130SILT by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 3-17V and a compact package style of 2.8mm x 3mm, making it suitable for space-constrained designs.
PTN78060WAZT
PTN78060WAZT by Texas Instruments is a switching regulator with 7 terminals, offering a max output current of 3A and a max output voltage of 12.6V. It operates in industrial temperature grades and uses pulse width modulation for control, making it suitable for various buck converter applications.
LM5164DDAT
LM5164DDAT by Texas Instruments is a switching regulator with 1A output current, 90V max output voltage, and 1000kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and compact design suitable for small outline packages.
TPS54260DGQR
TPS54260DGQR by Texas Instruments is a switching regulator with a max output current of 2.5A and a max output voltage of 58V, suitable for automotive applications. It operates in pulse width modulation control mode, with a min operating temperature of -40°C and a max operating temperature of 125°C. The package style is small outline, heat sink/slug, thin profile, shrink pitch, making it ideal for space-constrained designs.
TPS55340QRTERQ1
TPS55340QRTERQ1 by Texas Instruments is a 16-terminal switching regulator with 3-38V output voltage range. Ideal for automotive applications, it operates b/w -40 to 125°C, supports up to 7.75A output current, and uses pulse width modulation control technique at a max frequency of 2500 kHz.
LM5008MM
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMZ31707RVQR
LMZ31707RVQR by Texas Instruments is a switching regulator with a max output current of 7A and a max input voltage of 17V. It operates in a temperature range of -40 to 85°C and is commonly used in industrial applications.
LM25011AQ1MYX/NOPB
LM25011AQ1MYX/NOPB by Texas Instruments is a switching regulator with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various automotive applications. With a compact square package style and surface-mount capability, it offers high efficiency with a max switching frequency of 2000 kHz.
LM5145RGYR
LM5145RGYR by Texas Instruments is a voltage-mode switching controller with a max output voltage of 60V and max output current of 30A. With a control technique of pulse width modulation, it operates in automotive applications at temperatures ranging from -40 to 125°C. This chip carrier package with matte tin finish is ideal for buck converter configurations in various electronic systems.
LM22675MRE-ADJ/NOPB
LM22675MRE-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its low profile, small outline package style, and wide operating temperature range from -40°C to 125°C.
TPS62177DQCR
TPS62177DQCR by Texas Instruments is a switching regulator with a 3.3V output voltage, 0.5A output current, and 1000 kHz max switching frequency. It is ideal for industrial applications requiring a compact design and operates within a wide temperature range of -40 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ISL8205MIRZ-T7A
Intersil
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 22; Package Shape: RECTANGULAR; Surface Mount: YES; Minimum Input Voltage: 2.6 V;
Renesas Electronics
ISL8205MIRZ-T7A by Renesas Electronics is a current-mode switching regulator with a max output current of 5A and a max switching frequency of 2070 kHz. Ideal for industrial applications, this hybrid technology device operates b/w -40 to 85°C, making it suitable for various power management needs in compact designs.
ISL85410FRZ-T7A
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 12; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
ISL81601FRZ-T7A
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ISL8225MIRZ-T
DUAL SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 26; Package Code: QCCN; Surface Mount: YES; Maximum Output Current: 15 A;
DUAL SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Shape: SQUARE; Surface Mount: YES; Package Style (Meter): MICROELECTRONIC ASSEMBLY;
ISL85403FRZ-TK
Integrated Device Technology
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
ISL81801FVEZ-T7A
SWITCHING CONTROLLER; Moisture Sensitivity Level (MSL): 2; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: PURE MATTE TIN; Peak Reflow Temperature (C): 260;
ISL8225MIRZ
DUAL SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 26; Package Code: QCCN; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
DUAL SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Shape: SQUARE; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
ISL8216MIRZ
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 23; Package Code: XMA; Package Shape: SQUARE; Surface Mount: YES;
ISL8216MIRZ by Renesas Electronics is a switching regulator with a max output current of 4A and a max total power output of 48W. It is suitable for applications requiring adjustable output voltage, such as microelectronic assemblies and hybrid technologies.
ISL8216MIRZ-T
ISL85410FRZ-T
SWITCHING REGULATOR; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
ISL85410FRZ-T by Renesas Electronics is a switching regulator with a max output current of 1.7A and a control technique of pulse width modulation. It operates in automotive temperature grades, with a wide input voltage range from 3V to 40V, making it suitable for various power management applications. The compact package style and high switching frequency of up to 2000kHz make it ideal for space-constrained designs requiring efficient power conversion.
ISL85413FRTZ-T7A
SWITCHING REGULATOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 3;
SWITCHING REGULATOR; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
ISL81401FRZ-T7A
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved