Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Terminal Shape: FLAT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
$2.413
100+ parts
1k+ parts
10k+ parts
Native Components
$2.128
Special Function Capacitors FYL0H103Z attributes and parameters. Explore more Special Function Capacitors devices from Renesas Electronics
Capacitance:
Capacitor Type:
Diameter:
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Terminal Shape:
FYL0H103Z Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.29.00.40
SB
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Transys Electronics
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PM-5R0H305-R
Eaton Corporation
Eaton Corporation's PM-5R0H305-R is a rectangular package electric double layer capacitor with 3000000 uF capacitance and 5 V rated DC voltage. It has a negative tolerance of 20% and positive tolerance of 80%, suitable for applications requiring high energy storage in temperatures ranging from -40 to 60 °C. Ideal for through hole mounting in various electronic devices.
FM0H473ZTP18
Renesas Electronics
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Length: 10.5 mm;
FG0H105ZF
KEMET Corporation
FG0H105ZF by KEMET Corp is an Electric Double Layer Capacitor with 1000000uF capacitance, 5.5V URdc, and -25 to 70°C operating temp range. Ideal for bulk applications requiring high capacitance in cylindrical packages with radial terminals.
DSF356Q3R0
Cornell Dubilier Electronics
DSF356Q3R0 by Cornell Dubilier Electronics is a special function capacitor with a capacitance of 35,000,000 uF and a rated DC voltage of 3V. It has a max operating temperature of 85°C and is commonly used in through-hole mount applications.
FCS0H473ZFTBR24
Tokin
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Positive Tolerance: 80 %;
FG0H474ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Diameter: 14.5 mm;
FM0V104ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100000 uF; Rated DC Voltage (URdc): 3.5 V; Maximum Operating Temperature: 70 Cel; Size Code: 4120;
FMC0H334ZFTP18
Toko
SPECIAL CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Height: 15 mm;
FT0H474ZF
FT0H474ZF by KEMET is an Electric Double Layer Capacitor with 470000uF capacitance and 5.5V URdc. It has a cylindrical package, wire terminal shape, and -40 to 85°C operating temperature range. Ideal for applications requiring high capacitance in through-hole mounting setups.
EECHL0E107
Panasonic
Panasonic EECHL0E107 is a 100000000uF Electric Double Layer Capacitor with 2.7V URdc. It has -40 to 65 °C operating temp range, ideal for special function applications requiring high capacitance and low voltage requirements. Featuring cylindrical package style, wire terminals, and through-hole mounting, it offers reliable performance in various electronic devices.
PHB-5R0H155-R
PHB-5R0H155-R by Eaton Corporation is a special function capacitor with a capacitance of 1500000 uF and a rated DC voltage of 5 V. It has a max operating temperature of 70°C and a min operating temperature of -25°C. This capacitor is commonly used in various electronic applications for energy storage and power supply purposes.
EECS0HD224VN
Panasonic EECS0HD224VN is a special capacitor with 220000 uF capacitance and 5.5 V rated DC voltage. It has a radial package style, flat terminal shape, and -40 to 70 °C operating temperature range. Ideal for applications requiring high capacitance and voltage stability in through-hole mounting setups.
MAL219691205E3
Vishay Intertechnology's MAL219691205E3 is a special function capacitor with 15000000uF capacitance and 7V rated DC voltage. Featuring electric double layer dielectric material, it operates b/w -20 to 85 °C, making it ideal for applications requiring high capacitance and low voltage requirements in various electronic circuits.
FS0H104ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
BZ019A333ZSB
Kyocera
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 33000 uF; Rated DC Voltage (URdc): 9 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -20 Cel;
EDLSG105V5R5C
EDLSG105V5R5C by Cornell Dubilier Electronics is an Electric Double Layer Capacitor with 1000000uF capacitance and 5.5V rated DC voltage. Featuring a cylindrical package with radial style, it is ideal for applications requiring high energy storage in compact spaces. With a temperature range of -25°C to 85°C, it offers reliable performance in various environments.
SCMT32C755SRBA0
KYOCERA AVX
SCMT32C755SRBA0 by KYOCERA AVX is an Electric Double Layer Capacitor with 7500000uF capacitance and 5V rated DC voltage. It has a negative tolerance of 10% and positive tolerance of 30%, suitable for applications requiring high energy storage in bulk packaging. With a temperature range from -40 to 65 °C, it is ideal for through-hole mounting in various electronic devices.
FM0H104ZFTP18
FM0H104ZFTP18 by KEMET is an Electric Double Layer Capacitor with 100000uF capacitance and 5.5V rated DC voltage. It has a negative tolerance of 20% and positive tolerance of 80%. Ideal for applications requiring high capacitance in a compact size, such as power backup systems or energy harvesting devices.
FS0H473ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Terminal Shape: WIRE;
DVL-5R5D104T-R5
Elna
Elna's DVL-5R5D104T-R5 is an Electric Double Layer Capacitor with 100000 uF capacitance and 5.5 V rated DC voltage. It operates b/w -40 to 85 °C, suitable for surface mount applications due to its SMT package style and flat terminal shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FYL0H103ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Packing Method: BULK;
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Negative Tolerance: 20 %;
FYL0H473ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Terminal Pitch: 5.08 mm;
FYL0H223ZF
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Length: 5 mm;
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Terminal Shape: FLAT;
FYL0H223Z
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 22000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; No. of Terminals: 2;
FYL0H473Z
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Diameter: 12 mm;
FYL0H103Z
ELECTRIC DOUBLE LAYER CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 5.5 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -25 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved