Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Radiall S A R411806124 is a 6 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3. Ideal for RF applications, it operates from -40°C to 85°C within the frequency range of 0-6000 MHz.
Median Price
$61.780
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Farnell
1+ parts
$37.060
100+ parts
$28.910
1k+ parts
-
10k+ parts
Newark
$41.660
$31.470
Mouser Electronics
$81.900
$59.190
DigiKey
$84.370
$60.973
Nova Conductors
$30.985
Vyrian
Corohmni
$1.681
AZTECH Wire
$8.306
Continental Prestige Electronics
$30.649
$30.036
Netroflash
$30.365
Argo Parts USA
Perfect Parts
Assy Fe
High maximum input power capability allows for reliable and stable performance even at high power levels, making it a durable and robust choice for various applications.
Low VSWR ensures efficient power transfer and minimal signal loss, leading to improved overall system performance and accuracy.
Provides a moderate level of attenuation, allowing for precise control over signal strength and ensuring flexibility in adjusting signal levels as needed for different applications.
Coaxial construction offers good durability, excellent shielding properties, and efficient signal transmission, making it a reliable and long-lasting option for RF/microwave applications.
Wide operating temperature range ensures the attenuator can perform reliably in various environmental conditions, making it suitable for use in diverse settings.
With a low minimum operating temperature, the attenuator can function effectively even in cold environments, providing versatility in application and enhancing its performance in challenging conditions.
As a fixed attenuator, this product offers consistent and predetermined levels of signal attenuation, providing stable signal control and ensuring accurate signal strength adjustments in RF/microwave circuits.
Matched impedance ensures efficient power transfer and minimizes signal reflections, leading to improved signal quality and overall system performance in RF/microwave applications.
Low minimum operating frequency allows the attenuator to handle a wide range of frequencies, making it versatile and suitable for various RF/microwave applications that require signal attenuation across different frequency bands.
High maximum operating frequency capability enables the attenuator to handle a broad range of frequencies, making it a versatile choice for applications that require signal attenuation across a wide frequency spectrum.
RF/Microwave Attenuators R411806124 attributes and parameters. Explore more RF/Microwave Attenuators devices from Radiall S A
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
Since 1952, we have been enabling the future and collaborating with our customers to succeed. We have developed an award winning reputation and established strong relationships with our customers by providing innovative solutions. Part of being the best is supplying products that customers can trust for unrivaled repeatability and reliable performance. That’s why we’ve invested in facilities around the world that specialize in manufacturing capabilities critical to manufacturing the finest interconnect components to support your most demanding applications. Our commitment is to continue to be the market leader you rely on – in every region around the world – so that you can be the leader in your field.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
SS14
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
66-10-14
Cobham Plc
Cobham Plc's 66-10-14 is a RF fixed attenuator with 10 dB nominal attenuation, 1.9 max VSWR, and 51.76 dBm CW input power. Constructed coaxially for durability, it operates b/w -55°C to 100°C. Ideal for applications requiring precise signal attenuation in the frequency range of 0-18000 MHz.
DAT-31R5A-SP+
Mini-circuits
DAT-31R5A-SP+ by Mini-circuits is a RF attenuator with 31.5 dB attenuation, 1.9 VSWR, and 30 dBm CW input power. Ideal for RF/Microwave applications, it operates from -40 to 105°C with a frequency range of 0-4000 MHz.
TGL4203-SM
Triquint Semiconductor
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; JESD-609 Code: e3/e4;
ADRF5730BCCZN-R7
Analog Devices
Analog Devices' ADRF5730BCCZN-R7 is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation, 27.99 dBm Max Input Power (CW), and 50 ohm Characteristic Impedance. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 40 GHz, with operating temperatures from -40°C to 105°C.
YAT-10+
YAT-10+ by Mini-circuits is a 50 ohm fixed attenuator with 10.87 dB nominal attenuation, handling up to 33.01 dBm CW power and VSWR of 1.9. Ideal for RF/Microwave applications, it operates from -40°C to 85°C across frequencies ranging from DC to 18 GHz.
56-0
Api Technologies
FIXED ATTENUATOR; Maximum Operating Frequency: 26500 MHz; Nominal Attenuation: 0 dB; Maximum Input Power (CW): 33.01 dBm; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
HMC291ETR
Analog Devices' HMC291ETR is a RF/Microwave Attenuator with 12 dB Nominal Attenuation, 1.6 dB Max Insertion Loss, and 27.99 dBm Max Input Power (CW). It operates b/w -40 °C to 85°C, suitable for applications requiring Variable Attenuation in the frequency range of 700-4000 MHz.
TGL4203
VARIABLE ATTENUATOR; Maximum Input Power (CW): 23.98 dBm; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 50000 MHz; Nominal Attenuation: 17 dB; Maximum Insertion Loss: 2 dB;
HMC802ALP3E
HMC802ALP3E by Analog Devices is a RF/Microwave Attenuator with a max input power of 29.3 dBm and nominal attenuation of 20 dB. It operates at frequencies up to 10 GHz and is commonly used in applications requiring fixed attenuation, such as wireless communication systems.
HMC424ALH5TR
HMC424ALH5TR by Analog Devices is a RF/Microwave Attenuator with 31.5 dB Nominal Attenuation and 25 dBm Max Input Power. It operates from -40 to 85 °C, has a max insertion loss of 5.2 dB, and covers frequencies from 0 to 13000 MHz. Ideal for variable attenuation in RF/microwave applications.
3014-120
Aeroflex/weinschel
VARIABLE ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Construction: MODULE; Maximum Operating Temperature: 65 Cel; Maximum Operating Frequency: 1250 MHz;
1-30
1-30 by Cobham Plc is a COAXIAL FIXED ATTENUATOR with 30 dB Nominal Attenuation, 36.99 dBm Max Input Power (CW), and 1.25 Max VSWR. Ideal for RF/Microwave applications, it operates from -55 to 125 °C with a frequency range of 0-12400 MHz.
HMC307QS16GTR
Analog Devices' HMC307QS16GTR is a GaAs technology RF attenuator with 16 terminals, -5V power supply, and 6mA max supply current. It operates b/w -40 °C to 85°C, ideal for RF/microwave applications requiring variable attenuation in surface mount packages.
24-3-63
24-3-63 by Cobham Plc is a RF/Microwave Attenuator with 3dB Nominal Attenuation, 50 dBm Max Input Power (CW), and 1.3 Max VSWR. It operates in the frequency range of 0-8500 MHz, ideal for applications requiring precise signal attenuation in high-frequency environments. With a gold terminal finish and coaxial construction, it ensures reliable performance from -55 to 125°C.
PSA-10
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.5; Nominal Attenuation: 10 dB; Additional Features: HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel;
LCAT1001-02
Infinite Electronics International
FIXED ATTENUATOR;
F2258NLGK8
Integrated Device Technology
RF/Microwave Attenuators; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
66-10-34
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.9; Minimum Operating Temperature: -55 Cel; Construction: COAXIAL; Maximum Operating Temperature: 100 Cel; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W;
1
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Input Power (CW): 36.99 dBm; Maximum Operating Frequency: 12400 MHz; Minimum Operating Frequency: 0 MHz;
779-7
Lockheed Martin Microwave
Lockheed Martin Microwave's 779-7 is a fixed attenuator module with max input power of 33.01 dBm and VSWR of 1.4, operating from 0-18000 MHz. Ideal for RF applications requiring precise signal attenuation in high-power environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
R411.820.124
Radiall S A
Radiall S A's R411.820.124 is a 20 dB fixed attenuator with max input power of 30 dBm and VSWR of 1.3, ideal for RF applications up to 6 GHz. Constructed coaxially, it operates b/w -40°C to 85°C, offering a characteristic impedance of 50 ohms for precise signal attenuation in various setups.
R411820124
FIXED ATTENUATOR; Maximum Operating Temperature: 85 Cel; Additional Features: SMA; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 20 dB; Construction: COAXIAL;
R411.820.121
FIXED ATTENUATOR; Nominal Attenuation: 20 dB; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Maximum Operating Frequency: 18000 MHz;
R411820121
R411820121 by Radiall S A is a fixed attenuator with a max input power of 33.01 dBm and a max VSWR of 1.35. It operates in a frequency range of 0-18000 MHz and is commonly used in RF/Microwave applications for signal attenuation purposes.
R411803121
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel; Additional Features: SMA; Nominal Attenuation: 3 dB; Maximum Voltage Standing Wave Ratio: 1.35;
R411.806.124
Radiall S A's R411.806.124 is a COAXIAL fixed attenuator with a max input power of 30 dBm and a max VSWR of 1.3. It operates in the frequency range of 0-3000 MHz and is suitable for RF/Microwave applications requiring a nominal attenuation of 6 dB.
R411800124
FIXED ATTENUATOR; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 1.3; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=100W; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm;
R411801124
FIXED ATTENUATOR; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm; Nominal Attenuation: 1 dB; Maximum Operating Frequency: 6000 MHz; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=100W;
R411802124
FIXED ATTENUATOR; Maximum Operating Frequency: 3000 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Temperature: -40 Cel; Nominal Attenuation: 2 dB; Maximum Operating Temperature: 85 Cel;
R411803124
FIXED ATTENUATOR; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 3000 MHz; Maximum Input Power (CW): 30 dBm;
R411804124
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Nominal Attenuation: 4 dB; Minimum Operating Temperature: -40 Cel;
R411805124
FIXED ATTENUATOR; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel; Characteristic Impedance: 50 ohm;
R411807124
FIXED ATTENUATOR; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Maximum Operating Frequency: 3000 MHz; Additional Features: SMA;
R411808124
FIXED ATTENUATOR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=100W; Maximum Input Power (CW): 30 dBm; Minimum Operating Frequency: 0 MHz;
R411809124
FIXED ATTENUATOR; Maximum Operating Frequency: 6000 MHz; Characteristic Impedance: 50 ohm; Nominal Attenuation: 9 dB; Construction: COAXIAL; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=100W;
R411813124
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 13 dB; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 30 dBm; Maximum Operating Frequency: 6000 MHz;
R411816124
FIXED ATTENUATOR; Additional Features: SMA-F; SMA-M; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL; Maximum Operating Temperature: 85 Cel;
R411818124
FIXED ATTENUATOR; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.3; JESD-609 Code: e4;
R411.819.124
FIXED ATTENUATOR; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -40 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL;
R411825124
FIXED ATTENUATOR; Nominal Attenuation: 25 dB; Maximum Operating Frequency: 3000 MHz; Minimum Operating Frequency: 0 MHz; Additional Features: SMA-F; SMA-M, I/P POWER-MAX(PEAK)=100W; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved