Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Qorvo RFSA2013SR is a CMOS variable attenuator with 30 dB nominal attenuation and 3.5 dB max insertion loss. It operates from 50 MHz to 6 GHz, ideal for RF/microwave applications requiring precise signal control in a surface mount package. With a max input power of 30 dBm, it offers reliable performance in temperatures ranging from -40°C to 105°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Speed Components Ltd
AZTECH Wire
$10.876
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Kepictronics
The use of plastic/epoxy material makes this attenuator lightweight and durable, ideal for portable or rugged applications.
With a high maximum input power handling capability, this attenuator can handle high power signals without damage, ensuring reliable performance.
The 30 dB nominal attenuation allows for precise signal control and attenuation, making it suitable for a wide range of RF and microwave applications.
Being a component, this attenuator can be easily integrated into existing RF/microwave systems, providing flexibility and ease of use.
The low power supply requirement of 5V makes this attenuator energy-efficient and suitable for a variety of power sources.
With 16 terminals, this attenuator offers versatile connectivity options, allowing for complex signal routing and control.
The high maximum operating temperature of 105°C ensures stable performance even in extreme environmental conditions.
The low minimum operating temperature of -40°C ensures reliable operation in cold environments, making it suitable for a wide range of applications.
The tin silver terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and performance.
With a maximum insertion loss of 3.5 dB, this attenuator minimizes signal loss and distortion, preserving signal integrity and quality.
The CMOS technology used in this attenuator ensures low power consumption, high reliability, and consistent performance, making it a reliable choice for RF/microwave applications.
As a variable attenuator, this product allows for adjustable signal attenuation, providing flexibility and control over signal levels in various applications.
With a characteristic impedance of 50 ohms, this attenuator is compatible with standard RF/microwave systems and components, ensuring seamless integration.
The minimum operating frequency of 50 MHz makes this attenuator suitable for a wide range of RF and microwave applications, including communication and testing.
The surface mounting feature of this attenuator enables easy and secure installation on circuit boards, saving space and simplifying assembly.
With a maximum operating frequency of 6000 MHz, this attenuator is capable of handling high-frequency signals, making it suitable for a wide range of high-speed applications.
RF/Microwave Attenuators RFSA2013SR attributes and parameters. Explore more RF/Microwave Attenuators devices from Qorvo
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Insertion Loss:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Technology:
Terminal Finish:
RFSA2013SR RF & Microwave trade compliance attributes, and parameters.
ECCN
5A991.G
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Your car. Your smartphone. Your wrist. Your heart. Even outer space. Qorvo products are at work connecting, protecting and powering the planet. We bring core radio frequency (RF) and power technologies and solutions to mobile, infrastructure, the IoT, defense/aerospace and power management markets. Transforming the way you live, work, play and communicate — that's what inspires us. Innovation. Product Leadership. Scale. Speed. At Qorvo, we are driven by the possibility of discovery — of new RF and power technologies and advancements in design, manufacturing and communications that make the world a better, cleaner and more connected place. We've been working on that for more than 30 years, both as innovators and as stewards of our planet. And we are just getting started.
SMBJ18CA
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
EU2B-YS3203C
Idec
ROTARY SWITCH;
PE43610A-X
Psemi
PE43610A-X by Psemi is a RF attenuator with 31.5 dB attenuation, 3 dB insertion loss, and 13000 MHz max frequency. It's a GAAS technology variable attenuator for RF/microwave applications with 50 ohm impedance and -40 to 85 °C operating temp range.
HMC655
Analog Devices
Analog Devices' HMC655 is a RF/Microwave Attenuator with 6 dB Nominal Attenuation and 26.02 dBm Max Input Power. It operates from -55°C to 85°C, covering frequencies from 0 MHz to 50 GHz. Ideal for applications requiring fixed attenuation in high-frequency circuits.
HMC273MS10GE
HMC273MS10GE by Analog Devices is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 4.4 dB Max Insertion Loss, and 700-3800 MHz Frequency Range. It is a GaAs technology-based Variable Attenuator suitable for applications requiring precise signal attenuation in the 3-5V power supply range.
HMC812ALC4
Analog Devices' HMC812ALC4 is a RF/Microwave Attenuator with 35 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 50 ohm Characteristic Impedance. This GAAS technology-based variable attenuator operates b/w 5-30 GHz, ideal for applications requiring precise signal attenuation in high-frequency circuits.
HMC812LC4
HMC812LC4 by Analog Devices is a RF/Microwave Attenuator with 30 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 4 dB Max Insertion Loss. Constructed with GAAS technology, it's a Variable Attenuator suitable for applications requiring precise signal control in the frequency range of 5-30 GHz.
MTVA0200N09F
Emc Technology & Florida Rf Labs
FIXED ATTENUATOR; Nominal Attenuation: 2 dB; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -55 Cel; Terminal Finish: Silver (Ag); Construction: COMPONENT;
HMC-VVD106
Analog Devices' HMC-VVD106 is a 21 dB RF variable attenuator with max insertion loss of 2 dB. Operating from -55°C to 85°C, it covers frequencies from 36 GHz to 50 GHz. Ideal for RF/microwave applications requiring precise signal attenuation in a compact COMPONENT form factor.
45-3-44
Aeroflex/weinschel
FIXED ATTENUATOR; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Construction: COAXIAL; Additional Features: N-M, I/P POWER-MAX(PEAK)=10000W; Maximum Input Power (CW): 56.99 dBm;
4797
Lockheed Martin Microwave
Lockheed Martin Microwave's 4797 is a RF/Microwave Attenuator with max input power of 40 dBm, VSWR of 1.3, and max operating temp of 105°C. It is a variable attenuator module designed for frequencies ranging from 12.4 GHz to 18 GHz, offering low insertion loss for precise signal control in various applications.
HMC624ALP4ETR
Hittite Microwave
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Operating Temperature: 85 Cel;
HMC652LP2ETR
Analog Devices' HMC652LP2ETR is a RF/Microwave Attenuator with 6 terminals, operating from -40°C to 85°C. It's a fixed attenuator in a plastic/epoxy package for surface mount applications. Ideal for signal attenuation in various RF and microwave systems.
56-0
Api Technologies
FIXED ATTENUATOR; Maximum Operating Frequency: 26500 MHz; Nominal Attenuation: 0 dB; Maximum Input Power (CW): 33.01 dBm; JESD-609 Code: e4; Characteristic Impedance: 50 ohm;
284-3-13
FIXED ATTENUATOR; Mounting Feature: PANEL MOUNT; Package Body Material: METAL; Characteristic Impedance: 50 ohm; Maximum Operating Temperature: 100 Cel; Maximum Operating Frequency: 10000 MHz;
PCAT-20
Aeroflex/inmet
FIXED ATTENUATOR; Maximum Operating Temperature: 150 Cel; Nominal Attenuation: 20 dB; Maximum Operating Frequency: 12400 MHz; Maximum Input Power (CW): 31.76 dBm; Minimum Operating Temperature: -55 Cel;
HMC939ATCPZ-EP-R7
Analog Devices' HMC939ATCPZ-EP-R7 is a RF/Microwave Attenuator with 31 dB Nominal Attenuation, 27 dBm Max Input Power (CW), and 8 dB Max Insertion Loss. It operates from -55 to 125 °C, has a characteristic impedance of 50 ohm, and is ideal for variable attenuation in applications spanning from 100 MHz to 33 GHz.
44-3
Cobham Plc
The Cobham Plc 44-3 is a RF/Microwave Attenuator with 3 dB Nominal Attenuation, 1.25 Max VSWR, and 36.99 dBm Max Input Power (CW). Constructed coaxially, it operates from -50°C to 85°C and has a characteristic impedance of 50 ohm. Ideal for applications requiring fixed attenuation in the frequency range of 0-18000 MHz.
PAT0510SC0DBT10
Integrated Device Technology
PAT0510SC0DBT10 by Integrated Device Technology is a RF/Microwave Attenuator with 15.05 dBm CW power, 1.3 VSWR, and 0 dB attenuation. It operates from -55°C to 125°C, suitable for fixed attenuator applications in the frequency range of 0-10000 MHz.
TS0503F
Smiths Group Plc
TS0503F by Smiths Group Plc is a RF fixed attenuator with 3dB nominal attenuation, 33.01 dBm CW input power, and 1.5 max VSWR. Ideal for applications requiring precise signal control in the frequency range of 0-18000 MHz, such as telecommunications and radar systems.
47-10-44
FIXED ATTENUATOR; Minimum Operating Temperature: -55 Cel; Nominal Attenuation: 10 dB; Maximum Operating Frequency: 18000 MHz; JESD-609 Code: e4; Construction: COAXIAL;
ADRF5720BCCZN-R7
Analog Devices' ADRF5720BCCZN-R7 is a CMOS RF attenuator with 31.5 dB attenuation and 27.99 dBm CW input power, suitable for applications requiring variable attenuation in the frequency range of 0.009-40000 MHz. With a 50 ohm characteristic impedance, it operates at temperatures from -40 to 105°C and has a surface mount package with 24 terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RFSA3513TR7
Qorvo
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; Maximum Voltage Standing Wave Ratio: 1.43;
RFSA2113SR
The Qorvo RFSA2113SR is a 30 dB variable attenuator with max input power of 23 dBm. It operates from 50 MHz to 18 GHz, with insertion loss of 4.5 dB and characteristic impedance of 50 ohm. Ideal for RF/microwave applications requiring precise signal attenuation in components with surface mount package body material.
RFSA2013TR7
The Qorvo RFSA2013TR7 is a CMOS variable attenuator with 30 dB nominal attenuation and 3.5 dB max insertion loss. It operates from 50 MHz to 6 GHz, suitable for RF/microwave applications requiring precise signal control in a compact surface-mount package. With a max input power of 30 dBm, it offers high performance across temperatures ranging from -40°C to 105°C.
Rf Micro Devices
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Power Supplies (V): 5;
RFSA3513SR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3/5; Characteristic Impedance: 50 ohm;
RFSA2013SR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
RFSA2013TR7AE
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Power Supplies (V): 5;
RF/Microwave Attenuators; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
RFSA2033TR7
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Nominal Attenuation: 25 dB;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 3.5 mA; Maximum Operating Temperature: 85 Cel;
RFSA2113TR13
Qorvo's RFSA2113TR13 is a 30 dB variable attenuator with max input power of 23 dBm. Operating from -40 to 85°C, it offers 4.5 dB insertion loss and covers frequencies from 50 MHz to 18 GHz. Ideal for RF/microwave applications requiring precise signal attenuation in a compact surface-mount package.
RFSA2023SQ
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Power Supplies (V): 3.3;
RFSA2023SR
RFSA3013SQ
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Operating Temperature: 85 Cel;
RFSA2013SQ
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; JESD-609 Code: e2;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Package Equivalence Code: LCC16,.12SQ,20;
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Maximum Input Power (CW): 30 dBm;
RFSA2023TR7
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; Minimum Operating Temperature: -40 Cel;
RFSA3023SQ
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: CMOS; Nominal Attenuation: 30 dB;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved