Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Length: 12.7 mm; Width: 6.73 mm; Minimum Operating Temperature: -55 Cel;
Median Price
$30.700
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$29.290
100+ parts
$24.220
1k+ parts
$22.640
10k+ parts
-
DigiKey
$32.110
$26.249
$24.758
Authorized Procurement Solutions
Pulse & Datacom Transformers 100B-1003FXNL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulser
Application:
Height:
Isolation Voltage:
JESD-609 Code:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Terminal Finish:
Transformer Type:
Turns Ratio (Np:Ns):
Width:
100B-1003FXNL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Silicon Group
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
14240R
Dialog Semiconductor
14240R by Dialog Semiconductor is a DATACOM TRANSFORMER with approvals from UL, CSA, and TUV. It operates b/w -40°C to 85°C, features MATTE TIN terminal finish, and is through-hole mounted. Ideal for pulse & datacom applications due to its robust design and wide temperature range suitability.
CV9052-ALC
Coilcraft
CV9052-ALC by Coilcraft is a Pulse Transformer with 931.5uH primary inductance and 1500V isolation voltage. Ideal for gate drive applications, it operates b/w -40 to 85°C, with a turns ratio of 1.25:1 and min ET product of 20 V-us.
750311625
Wuerth Elektronik & Kg
750311625 by Wurth Elektronik is a Datacom Transformer with 2 primary windings, 9uH inductance, and 1500V isolation voltage. It operates b/w -40 to 125°C, has a turns ratio of 4:1, and supports an output current of up to 4A. Ideal for surface mount applications in pulse and data communication systems.
TG1G-E001NZLF
Halo Electronics
TG1G-E001NZLF by Halo Electronics is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH primary inductance. Ideal for Ethernet applications like 10/100 BASE-TX, it operates b/w -40 to 85°C and features matte tin over nickel terminal finish.
750311596
The Wuerth Elektronik & Kg 750311596 is a Pulse & Datacom Transformer with an isolation voltage of 1500V, inductance of 12uH, and output current of 1.9A. It is used for data communication applications requiring high voltage isolation and efficient power transfer in compact spaces.
PA2009NLT
Pulse Electronics
PA2009NLT by Pulse Electronics is a 3-function pulse transformer with 1500V isolation voltage and 55.5ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mount assembly in tape & reel packaging.
M21038/27-07
M21038/27-07 by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55°C to 130°C. This through-hole mounted transformer with a turns ratio of 1:1.41 is ideal for datacom applications requiring reliable signal transmission in compact spaces.
H7028NL
H7028NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. It features primary inductance of 120uH, dimensions L13.72xB12.19xH5.71mm, and operates b/w 0-70°C. Ideal for surface mount applications in data communication systems due to its compact size and reliable performance.
HM5149NLT
HM5149NLT by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. With inductance of 360uH, it operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high performance in a compact form factor.
HX5008FNL
HX5008FNL by Pulse Electronics is a UL-approved datacom transformer with 4 functions and 1500V isolation voltage. It features an insertion loss of 3dB, inductance of 325uH, and operates b/w -40 to 85°C. This surface-mount transformer has dimensions of L17.86xB13.16xH6.12mm, making it ideal for various data communication applications.
DA101JC
Murata Manufacturing
Murata Manufacturing's DA101JC is a Pulse & Datacom Transformer with 2000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for data transmission applications, it operates b/w -40 to 85 °C and features surface mounting at dimensions of 9x6.35x9.52 mm.
PM-DB2745S+
Premier Magnetics
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-STD-1553; Application: DATA BUS INTERFACE; Height: 3.937 mm; Width: 16 mm;
ISNF-0249-D101
Schurter Ag
ISNF-0249-D101 by Schurter Ag is a pulse transformer with 3500V isolation voltage, 1000ns max pulse rise time, and 1400uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C and features surface mounting method.
H5019NL
H5019NL by Pulse Electronics is a datacom transformer with 4 functions and 4 primary windings. It has an isolation voltage of 1500 V and insertion loss of 1 dB. This transformer is suitable for applications such as 1000 BASE-T with a max operating temperature of 70°C.
1002C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Minimum ET Product: 200 V-us; Packing Method: TUBE; Height: 15.75 mm; Maximum Operating Temperature: 70 Cel;
HCTSM100304FL-E
Bourns
Bourns HCTSM100304FL-E is a DATACOM TRANSFORMER with 400uH inductance, 4200V isolation voltage, and 1:1.333 turns ratio. Ideal for pulse & datacom applications, it operates b/w -40 to 125°C and features surface mounting at dimensions of 10.8mm x 13.5mm x 7.5mm (WxLxH).
PA0264NLT
PA0264NLT by Pulse Electronics is a Pulse Transformer with 1500V isolation voltage, 1140uH primary inductance, and 12.7 V-us min ET product. Ideal for GATE DRIVE applications, it operates b/w -40 to 130 °C and comes in L8.6xB6.7xH3.6 mm dimensions for surface mount assembly.
760301306
760301306 by Wurth Elektronik is a Pulse Transformer with an Isolation Voltage of 2500V, Inductance of 1800uH, and Min ET Product of 140V-us. Ideal for GATE DRIVE applications, it operates b/w -40 to 125 °C and has a compact size of 11mm x 10.5mm.
IT248
Schaffner Holding Ag
The Schaffner Holding Ag IT248 pulse transformer has an isolation voltage of 750V, max pulse rise time of 2200ns, and inductance of 17000uH. Ideal for applications requiring high voltage isolation and fast pulse response in data communication systems.
IT258
IT258 by Schaffner Holding Ag is a UL approved Pulse Transformer with 750V isolation voltage, 2500uH inductance, and 250ns pulse rise time. Ideal for datacom applications due to its compact L17.6XB16.7XH11.3 (mm) dimensions and through-hole mounting feature, operating b/w -25°C to 70°C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pulser
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved