Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 13.67 mm; Turns Ratio (Np:Ns): 1:1; 1:1; Inductance (Primary): 325 uH; Height: 5.87 mm;
Median Price
$7.820
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$5.272
100+ parts
$4.175
1k+ parts
$4.036
10k+ parts
$4.011
Chip1Stop
$6.000
$5.380
$5.050
DigiKey
$7.840
$6.477
$5.903
$5.726
Mouser Electronics
$8.770
$5.610
$5.490
TTI
-
$5.620
$5.300
$5.190
Verical
$8.076
Master Electronics
$5.690
$5.060
$4.790
IBS Electronics
$7.280
$6.578
$6.240
Metaverse IC Inc.
Authorized Procurement Solutions
GreenTree Electronics
Perfect Parts
XScomponents
Glotronic Ltd.
Pulse & Datacom Transformers HX1294FNL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
HX1294FNL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Semtech
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Hi-tron Semiconductor
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
96046123729
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Height: 11.9 mm; Packing Method: TRAY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SD250-1L
Coilcraft
Coilcraft SD250-1L is a pulse transformer with 3750V isolation voltage, 1500uH inductance, and 375V-us min ET product. Ideal for base/gate drive applications, it operates b/w -40 to 85°C and features through-hole mounting.
H1187NL
Pulse Electronics
H1187NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage. It is designed for Ethernet applications like 10/100 BASE-TX, featuring dimensions of L7.62xB7.0xH6.35 mm and matte tin terminal finish. Operating temperature ranges from 0 to 70°C, suitable for surface mount installation in various electronic devices.
78613/3JC
Murata Manufacturing
Murata Manufacturing's 78613/3JC is a pulse transformer with 1000V isolation voltage, 190uH primary inductance, and 6V-us min ET product. Ideal for surface mount applications in datacom systems due to its compact size (6.35mm x 9mm x 12.7mm) and turns ratio of 1CT:1.
78615/8JC
Murata Manufacturing's 78615/8JC is a Pulse Transformer with 1000V isolation voltage, 1000uH inductance, and 15 V-us min ET product. Ideal for datacom applications, it is a surface mount transformer with dimensions of 6.35mm x 9mm x 12.7mm and turns ratio of 1CT:1CT.
LP5009ANL
Link-pp Int'l Technology
LP5009ANL by Link-pp Int'l Technology is a DATACOM TRANSFORMER with dimensions L13.16xB18.59xH6.12 (mm). It operates b/w -40 to 85 °C and has a Turns Ratio of 1CT:1CT for applications in 10/100 BASE-T, ETHERNET, and LAN networks. Ideal for surface mount installations due to its compact size.
BX6152NLT
BX6152NLT by Pulse Electronics is a Datacom Transformer with 3000V isolation voltage, 7uH inductance, and -40 to 85°C operating temperature range. Ideal for surface mount applications in data communication systems due to its compact size and 1:1:2 turns ratio.
PA2002NLT
PA2002NLT by Pulse Electronics is a pulse transformer with 3 functions, 1500V isolation voltage, and 60ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mounting.
7490100143
Wuerth Elektronik & Kg
Wurth Elektronik 7490100143 is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in pulse and data communication systems. Dimensions L12.95xB7.11xH5.33 mm, operating temp -40 to 85°C, terminal finish TIN NICKEL.
8464
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 2; Height: 5.84 mm; Dimensions: L28.57XB16.26XH5.84 (mm); Width: 16.26 mm;
PM-DB27408
Holt Integrated Circuits
PM-DB27408 by Holt Integrated Circuits is a DATACOM TRANSFORMER with MIL-STD-1553 approval. It has dimensions of L23.62xB10.92xH3.937 mm and operates b/w -55 to 130 °C. Ideal for DATA BUS INTERFACE, it features a turns ratio of 1:2.5 and is THROUGH HOLE MOUNTED for easy installation.
750311889
Wurth Elektronik 750311889 is a Pulse & Datacom Transformer with 500V isolation voltage, 37uH inductance, and 0.1A output current. Ideal for surface mount applications in data communication systems due to its compact dimensions and high operating temperature range of -40 to 125°C.
749010011
Wurth Elektronik 749010011 is a UL approved datacom transformer with 1500V isolation voltage and 350uH primary inductance. It is designed for LAN applications supporting 10/100 BASE-TX, with dimensions of 12.7mm x 6.855.08mm and operating temperatures ranging from 0 to 70°C.
PM-DB2762
PM-DB2762 by Holt Integrated Circuits is a DATACOM TRANSFORMER with 1:2.5 Turns Ratio, MIL-STD-1553 approved for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, with dimensions of L10.16xB10.16xH8.128 mm and Tin/Lead terminal finish for surface mount installation.
74030
Pico Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Length: 11.43 mm; Minimum ET Product: 10 V-us;
TG110-E050N5RLTR
Halo Electronics
TG110-E050N5RLTR by Halo Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX Ethernet applications. It offers 2 functions with an isolation voltage of 1500V and primary inductance of 350uH. This surface mount transformer operates b/w -40°C to 85°C, measuring L12.7xB7.11xH6.35mm in dimensions.
SM91501AL-E
Bourns
Bourns SM91501AL-E is a pulse transformer with 2 functions, 150uH inductance, and 4300V isolation voltage. Ideal for battery management systems, it operates b/w -40 to 125°C and has a turns ratio of 1CT:1CT. Measuring 14.81x11.68x5mm, it's AEC-Q200 approved for automotive applications.
1011
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
HX1198NLT
HX1198NLT by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1CT turns ratio. It is designed for surface mount applications in pulse and data communication systems. With dimensions of L12.7xB7.11xH5.97 mm, it operates b/w -40°C to 85°C temperature range efficiently.
7491199212
Wurth Elektronik 7491199212 is a Pulse & Datacom Transformer with 1500V isolation voltage, 127uH inductance, and 12V output voltage. Ideal for Ethernet applications, it operates b/w -40 to 125°C with a frequency range of 200KHz to 500KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
88E3082
Marvell
ETHERNET TRANSCEIVER; Terminal Form: BALL; No. of Terminals: 224; Package Code: BGA; Package Shape: RECTANGULAR; Package Style (Meter): GRID ARRAY;
KSZ8695PI
Microchip
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 289; Package Code: BGA; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved