Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
W3011A by Pulse Electronics is an RF GPS antenna with omni-directional construction. Featuring RHCP polarization, it operates b/w 1565.42-1585.42 MHz frequencies with a gain of 3.4 dB. Ideal for applications requiring reliable GPS signal reception in temperatures ranging from -40 to 85°C.
Median Price
$1.522
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.490
100+ parts
$0.954
1k+ parts
$0.902
10k+ parts
$0.853
DigiKey
$1.960
$1.169
$1.050
$0.955
Mouser Electronics
$2.010
$1.210
$1.030
$1.010
Master Electronics
-
$1.622
$1.022
$0.947
Verical
$1.553
$1.188
$1.159
Arrow
$1.068
$0.963
$0.883
Element14
$1.326
$0.800
Farnell
$0.854
Nova Conductors
$0.728
Forefront Electronics and Design
$24.500
Electro Sonic
$1.026
$0.753
$0.710
Vyrian
Chip Stock
IBS Electronics
$1.847
$1.410
$1.342
Rutronik
$1.590
TME
ComSIT Distribution GmbH
Continental Prestige Electronics
$1.540
$1.120
Corohmni
$1.916
Aztec Data Supply Inc.
$2.808
GreenTree Electronics
Argo Parts USA
Glotronic Ltd.
Metaverse IC Inc.
Authorized Procurement Solutions
Abacus Technologies
Kepictronics
This antenna can receive signals from all directions, making it suitable for applications where the direction of the signal source may vary.
Being a component-based construction allows for flexibility and customization in integrating the antenna into various systems or designs.
With a high maximum operating temperature, this antenna can withstand harsh environmental conditions and maintain optimal performance.
The low minimum operating temperature ensures that this antenna can function reliably in cold environments without any performance degradation.
Right-hand circular polarization (RHCP) is beneficial for GPS applications as it helps improve signal strength and reception, especially in urban or obstructed environments.
Specifically designed for GPS applications, this antenna ensures accurate and reliable signal reception for location-based services or navigation systems.
Having a standard impedance of 50 ohms makes this antenna compatible with a wide range of RF devices and systems, ensuring easy integration and connectivity.
With a moderate gain of 3.4 dB, this antenna provides a good balance between signal strength and coverage, making it suitable for various GPS tracking or positioning tasks.
The antenna's capability to operate at a low frequency of 1565.42 MHz ensures compatibility with GPS satellite signals, enabling accurate and consistent positioning.
Being able to support a high frequency of 1585.42 MHz allows this antenna to cover a broad range of GPS signal frequencies, ensuring comprehensive signal reception and tracking capabilities.
RF/Microwave Antennas W3011A attributes and parameters. Explore more RF/Microwave Antennas devices from Pulse Electronics
Characteristic Impedance:
Construction:
Gain:
Omni-Directional:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Polarization:
RF or Microwave Device Type:
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
Transys Electronics
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Itt Semiconductor
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Eic Semiconductor
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
ANT-868-USP410
Linx Technologies
MOBILE STATION ANTENNA;
2450AD18A6050E
Johanson Technology
APAMP-109
Abracon
Abracon's APAMP-109 is a GPS antenna with 5dB gain and 50 ohm impedance. Constructed coaxially in plastic/epoxy, it has VSWR of 1.5, RHCP polarization, and operates b/w -40°C to 80°C. Ideal for RF/Microwave applications like GPS systems due to its high performance and durability.
2133530100
Molex
Molex 2133530100 is an Omni-Directional RF antenna module for BEIDOU, cellular, GPS, GLONASS, LTE, and UWB applications. Linear polarization with operating frequency range of 698-960 MHz. Features adhesive mount for easy installation.
ACAG1204-915-T
Abracon's ACAG1204-915-T is a ceramic, metal-sealed cofired RF antenna with a VSWR of 2. It operates in temperatures from -40°C to 85°C and has an omni-directional linear polarization. Ideal for ISM/RFID/SIGFOX applications, this mobile station antenna offers a bandwidth of 15 MHz and features surface mounting.
AEACAC053010-S433
Abracon's AEACAC053010-S433 is a 10W coaxial RF antenna with 50 ohm impedance. It operates b/w 428-438 MHz, suitable for IoT/ISM/RFID/SIGFOX/Wireless applications. With linear polarization and panel mount feature, it can withstand temperatures from -40 to 85°C.
1001430
KYOCERA AVX
1001430 by KYOCERA AVX is a RF/Microwave Antenna for WLAN applications. With a max transmission power of 2W, it operates b/w 5150-5825 MHz frequencies. Featuring linear polarization and a metal package body, it is ideal for mobile station antenna setups with 50 ohm impedance.
FXP830.24.0100B
Taoglas
FXP830.24.0100B by Taoglas is a POLYMER RF antenna with 2W power, linear polarization, and 50 ohm impedance. Ideal for Bluetooth/WiFi applications, it operates b/w -40°C to 85°C as an omni-directional base station/broadcast transmission antenna with panel mount feature.
HG172706U-PRO
Infinite Electronics International
BASE STATION/BROADCAST TRANSMISSION ANTENNA;
PRO-OB-440
PRO-OB-440 by Abracon is a RF/Microwave Antenna with 50 ohm impedance. It operates b/w 2400-2500 MHz, ideal for Bluetooth, RFID, WLAN applications. With a VSWR of 2.65 and surface mount feature, it's suitable for mobile station antennas.
1001932FT-AA10L0100
1001932FT-AA10L0100 by KYOCERA AVX is a RF/Microwave Antenna with 50 ohm impedance, 4.4 dB gain, and 2 VSWR. It operates b/w 2400-5000 MHz with 0.5 W power for mobile station applications.
RI-ANT-G04E-30
Texas Instruments
ANTENNA-OTHER;
W3544A
Pulse Electronics
W3544A by Pulse Electronics is a RF/Microwave Antenna for mobile stations with 50 ohm impedance. It supports 2G/3G/LTE applications, operates b/w -45°C to 85°C, and handles up to 3W transmission power. With a frequency range of 824-2170 MHz, it features a surface mount design in plastic/epoxy body.
RN-SMA-4
Microchip Technology
Microchip Technology's RN-SMA-4 is a 50 ohm coaxial antenna with 2.2 dB gain and 120 MHz bandwidth. With a VSWR of 1.9, it operates at up to 2450 MHz for base station/broadcast transmission applications.
1003893FT-AA10L0200
RN-SMA-S
ANTENNA-OTHER; Mounting Feature: PANEL MOUNT; Additional Features: SMA-M; Omni-Directional: NO; Construction: COAXIAL;
2108994-1
TE Connectivity
ANTENNA-OTHER; Mounting Feature: SURFACE MOUNT; Characteristic Impedance: 50 ohm;
230-3
Astron Wireless Technology
YAGI ANTENNA;
APAKM4012-C2G3D
Abracon's APAKM4012-C2G3D is a GPS antenna with RHCP/LHCP polarization, 0.6 dB gain, and operating temperatures from -40°C to 85°C. Ideal for GPS/GALILEO/GLONASS/BEIDOU/SDARS applications due to its RF/Microwave Antenna category and high performance in various weather conditions.
HG2405MGU-RSP
L-com
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
W3013
RF/Microwave Antennas;
W3011
GPS ANTENNA; Gain: 3 dB; Polarization: RHCP; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Characteristic Impedance: 50 ohm;
W3010
GPS ANTENNA; Minimum Operating Frequency: 1565.42 MHz; Minimum Operating Temperature: -40 Cel; Polarization: RHCP/LINEAR; Construction: COMPONENT; Maximum Operating Temperature: 85 Cel;
W3012
W3012 by Pulse Electronics is an RF/Microwave Antenna with Omni-Directional capability and RHCP polarization. It operates b/w 902-928 MHz frequencies, suitable for ISM applications. With a temperature range of -40 to 85°C, it's ideal for mobile station antenna setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved