Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 1 A; Mounting Type: SURFACE MOUNT; Packing Method: TR, 7 INCH; Maximum Operating Temperature: 105 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters PE-0402RFB100ST attributes and parameters. Explore more Data Line Filters devices from Pulse Electronics
Maximum DC Resistance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Rated Current:
Width (mm):
PE-0402RFB100ST Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
EU2B-YS3203F
Idec
ROTARY SWITCH;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
General Transistor
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BLM18PG471SH1J
Murata Manufacturing
Murata Manufacturing's BLM18PG471SH1J is a chip bead data line filter with 2 terminals, AEC-Q200 screening. With dimensions of 1.6x0.8x0.8mm, it offers 470 OHM output impedance and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to its ferrite construction and rated current of 1A.
EXC24CE900U
The Panasonic EXC24CE900U is a data line filter with 2 functions and a rated voltage of 5V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
742792662
Wuerth Elektronik & Kg
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
ACT45B-220-2P-TL003
TDK
The TDK ACT45B-220-2P-TL003 is a FERRITE CHIP filter with 22uH inductance, 10 Mohm insulation resistance, and 0.25A rated current. Ideal for data line filtering applications due to its compact dimensions of L4.5XB3.2XH2.8 (mm) and surface mounting type.
BLM18KG700TN1D
Murata Manufacturing's BLM18KG700TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With a max DC resistance of 0.022 ohm and output impedance of 70 ohm, it is ideal for applications requiring filtering at frequencies up to 100 MHz. This surface mount ferrite chip filter has dimensions of L1.6xB0.8xH0.6 mm and can handle a rated current of 3.5 A.
ILHB1206ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB1206ER121V is a 120 OHM FERRITE CHIP filter with 2 terminals, rated for 6A current. Ideal for data line filtering applications, it operates b/w -55 to 125 °C and has a DC resistance of 0.02 ohm. Measuring L3.2XB1.6XH1.1 (mm), it is designed for surface mount installation at frequencies up to 100 MHz.
AWCU00453228201XTE
Yageo
Yageo AWCU00453228201XTE is a Data Line Filter with 2 functions, AEC-Q200 screening. Features 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and -40 to 125 °C Operating Temp. Ideal for automotive applications requiring noise suppression in data lines.
DLW43SH510XK2K
Murata Manufacturing DLW43SH510XK2K is a FERRITE CHIP filter with 51uH inductance, 10 Mohm insulation resistance, and rated for 0.23A current. It has 4 terminals, operates b/w -40 to 125 °C, and is AEC-Q200 compliant. Ideal for data line filtering applications requiring surface mount installation.
LI0402C221R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
74279263
Wurth Elektronik 74279263 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and a max frequency of 350 MHz, it offers an output impedance of 220 ohm and can handle up to 1A rated current. Ideal for surface mount installations in electronic devices requiring noise suppression on data lines.
MH2029-221Y
Bourns
Bourns MH2029-221Y is a chip bead data line filter with 2 terminals, rated for 2A current. Featuring ferrite construction, it offers 220 ohm output impedance and operates b/w -55°C to 125°C. Ideal for applications requiring noise suppression in data lines up to 100MHz frequency.
SRF3216-102Y
Bourns SRF3216-102Y is a data line filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has min insulation resistance of 10 Mohm and DC resistance of 1 ohm. Ideal for applications requiring filtering in compact spaces with surface mounting type.
DSS1NB32A103Q91A
Murata Manufacturing's DSS1NB32A103Q91A is a 3-terminal data line filter with 1000 Mohm insulation resistance, 100 V rated voltage, and 6 A rated current. It operates b/w -40 to 85 °C and has a capacitance of 10000 uF. Ideal for applications requiring noise suppression in data lines.
MMZ1608Y152BTA00
The TDK MMZ1608Y152BTA00 is a chip bead data line filter with 2 terminals, rated for 0.3A current and 1500 ohm output impedance. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm (LxWxH). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
74279221111
Wurth Elektronik 74279221111 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 5.4A current and 110Ω output impedance. Ideal for surface mount applications, it operates b/w -55°C to 125°C, measuring L3.2xB1.6xH1.1mm (L0.126xB0.063xH0.043 inch).
BLM18RK121SN1D
Murata Manufacturing's BLM18RK121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.25 ohm and output impedance of 120 ohm at frequencies up to 100 MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
ACM4520-901-2P-T000
ACM4520-901-2P-T000 by TDK is a Data Line Filter with 2 functions, rated at 50V and 2A. It offers high insulation resistance of 10 Mohm, low DC resistance of 0.06 ohm, and output impedance of 900 ohm. Ideal for applications requiring noise suppression in data lines with operating temperatures from -40 to 85°C.
NFM18PS105R0J3D
Murata Manufacturing's NFM18PS105R0J3D is a data line filter with 6.3V rated voltage, 1000000uF capacitance, and 2A rated current. It features a feed through capacitor design and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring high insulation resistance.
EMI9408MUTAG
EMI9408MUTAG by Onsemi is a data line filter with 8 functions and 16 terminals. It offers an inductance of 0.07uH, capacitance of 24uF, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a temperature range from -40 to 85°C.
NFE31PT152Z1E9L
Murata Manufacturing's NFE31PT152Z1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With a capacitance of 1500uF, it operates b/w -40 to 85 °C, making it ideal for surface mount applications requiring up to 6A current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pulse Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved