Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMPS TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: PA2046NL; Maximum Operating Temperature: 130 Cel; Inductance (Primary): 44.4 uH; No. of Winding (Secondary): 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
SMPS Transformers PA2046NL attributes and parameters. Explore more SMPS Transformers devices from Pulse Electronics
Additional Features:
Height:
Maximum Input Voltage (V):
Minimum Input Voltage (V):
Length:
Manufacturer Series:
Mounting Feature:
No. of Winding (Primary):
No. of Winding (Secondary):
Maximum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Dimensions:
Inductance (Primary):
Transformer Type:
Width:
PA2046NL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Fairchild Semiconductor
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
DCT15EFD-U44S003
DCT15EFD-U44S003 by TDK is a SMPS transformer with primary inductance of 10uH. It features dimensions of 8.5mm x 16.5mm x 22.5mm, suitable for surface mount applications. Ideal for power supply designs requiring compact and efficient transformers.
PLA51LA32
Vishay Intertechnology
Vishay Intertechnology's PLA51LA32 is a 2000W SMPS Transformer with primary inductance of 128uH. Ideal for applications requiring output voltage of 30V, it operates b/w -55°C to 125°C. With dimensions of 22x53x70mm, it is designed for chassis mounting and supports frequencies up to 100KHz.
PA2047NL
Pulse Electronics
PA2047NL by Pulse Electronics is a SMPS transformer with 2 primary windings and an inductance of 7.2 uH. It has a max operating temperature of 130°C and output voltages of 5V and 3.3V. This transformer is suitable for surface mount applications in power supply systems with input voltages ranging from 9V to 36V.
PA1137NLT
PA1137NLT by Pulse Electronics is a 13.5W SMPS Transformer with primary inductance of 126.7uH, suitable for surface mount applications. It operates b/w -40 to 130°C, has two primary windings, and outputs 5V at max frequency of 200 KHz.
749119650
Wuerth Elektronik & Kg
Wurth Elektronik's 749119650 SMPS Transformer has primary inductance of 100uH, 2 secondary windings, and operates b/w -40°C to 125°C. With output voltages of 5V each, it is ideal for surface mount applications requiring input voltage range of 33-57V.
7508170310
The Wurth Elektronik 7508170310 SMPS Transformer has an inductance of 1990 uH, output voltage of 12V, and operates b/w -40 to 125 °C. With a height of 11mm and width of 13.8mm, it is ideal for surface mount applications with input voltage ranging from 78V to 375V.
PA5100.005NLT
PA5100.005NLT by Pulse Electronics is a 27W SMPS Transformer with 2 primary windings at 11uH inductance. It operates b/w -40 to 125 °C and outputs 5V, suitable for surface mount applications up to 200 KHz frequency.
PA5131.005NLT
PA5131.005NLT by Pulse Electronics is a 35W SMPS Transformer with primary inductance of 13uH and two windings. It operates b/w -40°C to 130°C, has output voltages of 5V, and supports up to 200 KHz frequency. Ideal for surface mount applications requiring efficient power conversion.
750313995
750313995 by Wurth Elektronik is a SMPS Transformer with 2 primary and secondary windings. It operates b/w -40 to 125 °C, providing output voltages of 15V and 5V. Ideal for applications requiring a surface mount transformer with input voltage range of 15-40V and operating frequency of 300-600 KHz.
POE30P-50LD
Coilcraft
Coilcraft's POE30P-50LD is a 3W SMPS transformer with primary inductance of 310000uH. It features dual windings for 12V and 5V output voltages, suitable for surface mount applications. With dimensions of L10.92xB8.6xH9.02mm, it operates b/w -40 to 85°C and supports frequencies up to 250KHz.
78250JC
Murata Manufacturing
Murata Manufacturing's 78250JC is a SMPS Transformer with dimensions of 6.35mm x 9mm x 12.7mm, suitable for surface mount applications. It offers efficient power conversion in compact spaces, making it ideal for various electronic devices requiring high-performance transformers.
C1588-ALD
Coilcraft's C1588-ALD is a 7W SMPS transformer with primary inductance of 155uH. It has two secondary windings, output voltage of 5V, and operates b/w -40 to 85°C. Ideal for surface mount applications with max input voltage of 72V and frequency up to 250KHz.
B0570-BL
Coilcraft's B0570-BL SMPS Transformer has a power rating of 12W, primary inductance of 3400uH, and operates b/w -40°C to 85°C. Ideal for applications requiring a 12V output voltage, this transformer is designed with dimensions L27.94xB27.94xH24.13mm and features through-hole mounting in TRAY packaging.
750311880
Wurth Elektronik 750311880 is a SMPS transformer with inductance of 2.5uH, operating temperature range from -40 to 125°C, and dimensions L9.78xB9.14xH10.54mm. It has two secondary windings for output voltages of 5V each, suitable for applications requiring a min input voltage of 3V and operating frequency b/w 200kHz to 600kHz on surface mount boards.
2013
Hammond Manufacturing
Hammond Manufacturing's 2013 SMPS Transformer has a power rating of 25W, height of 77.724mm, and width of 63.5mm. It operates b/w 0.15KHz to 7KHz frequencies, suitable for chassis mounting in various applications requiring efficient power transformation within compact spaces.
760390015
Wurth Elektronik 760390015 is a SMPS transformer with inductance of 475uH, output voltage of 5V, and operating temperature range from -40 to 125°C. Ideal for applications requiring surface mounting feature, it has approvals including AEC-Q200, CUL, and UL for reliability in automotive and industrial electronics.
B78304B1032A003
The TDK B78304B1032A003 is a SMPS transformer with inductance of 10000 uH, operating temperature range from -40 to 85 °C, and frequency range of 10 KHz to 1600 KHz. It is designed for surface mount applications in power supplies and converters.
PH9185.011NL
PH9185.011NL by Pulse Electronics is a 3W SMPS Transformer with primary inductance of 750uH. It operates b/w -40 to 125°C, suitable for surface mount applications due to its compact size (13x10x12.5mm).
DA2033-ALD
Coilcraft's DA2033-ALD is a SMPS transformer with 4 primary windings and 10uH inductance. It operates b/w -40 to 125°C, suitable for applications requiring a min input voltage of 3V and max of 24V. With dimensions L24.13xB17.4xH9.78 mm, it is designed for surface mounting in various power supply circuits.
C1589-ALD
Coilcraft's C1589-ALD is a 7W SMPS transformer with primary inductance of 155uH. It has 2 secondary windings and operates b/w -40 to 85°C. Ideal for applications requiring a max input voltage of 72V, output voltage of 12V, and operating frequency up to 250 KHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved