Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PA1005.125NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 20A peak primary current. It has dimensions of L7.21xB8.38xH4.83 (mm) and inductance of 3000uH, suitable for surface mount applications in temperature range -40 to 130 °C at frequencies up to 1MHz.
Median Price
$1.954
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.700
100+ parts
$1.420
1k+ parts
$1.180
10k+ parts
$0.841
Arrow
$1.879
$1.478
$1.374
$1.261
DigiKey
$2.030
$1.710
$1.530
$1.388
Mouser Electronics
$1.630
$1.370
$1.150
Verical
-
IBS Electronics
$2.298
$2.256
NAC Semi
$3.320
$3.020
Ampacity Inc.
$0.830
Wound primary type ensures reliable performance and accuracy in current sensing applications.
High peak primary current capacity makes this transformer suitable for applications with higher current requirements.
Compact dimensions make it easy to integrate this current sense transformer into various electronic devices.
High inductance value in the secondary winding allows for accurate current sensing and measurement.
Wide operating temperature range makes this transformer suitable for use in various environmental conditions.
Surface mount feature provides easy and secure installation of the transformer on PCBs.
High turns ratio allows for accurate current measurement and sensing in the secondary winding.
Current Sense Transformers PA1005.125NL attributes and parameters. Explore more Current Sense Transformers devices from Pulse Electronics
Additional Features:
Height:
Length:
Mounting Feature:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Primary Current (Peak):
Dimensions:
Type (Primary):
Inductance (Secondary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
PA1005.125NL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Eic Semiconductor
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
53040C
Murata Manufacturing
Murata Manufacturing's 53040C is a WOUND PRIMARY current sense transformer with 10A peak primary current. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has a turns ratio of 1:40 and load resistance of 1.1Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
54200C
C&d Technologies
CURRENT SENSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 5400; Terminal Finish: Tin (Sn); Inductance (Secondary): 60000 uH; Maximum Operating Frequency: 500 KHz;
7202
Jw Miller Magnetics
CURRENT SENSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 7200; Dimensions: L19.0XB11.0XH20.1 (mm); Load Resistance: 100 ohm; Type (Primary): BAR PRIMARY;
CS4050V-01L
Coilcraft
CS4050V-01L by Coilcraft is a WOUND PRIMARY current sense transformer with 35A peak primary current. It has an inductance of 5000uH and operates b/w -40 to 85°C. Ideal for applications requiring precise current sensing at frequencies ranging from 3KHz to 1MHz.
CST2010-100LD
CST2010-100LD by Coilcraft is a WOUND PRIMARY current sense transformer with 254 V-us ET product, 47 A primary current peak, and -40 to 125 °C operating temperature range. Ideal for surface mount applications in automotive electronics, offering high inductance of 8500 uH and turns ratio of 1:100 for precise current sensing at frequencies up to 1 MHz.
FIS125NL
Pulse Electronics
FIS125NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current and 76000uH secondary inductance. It operates at -40 to 125 °C, ideal for through-hole mounting applications requiring high accuracy in measuring current up to 500 KHz frequency.
CU8965-ALD
CU8965-ALD by Coilcraft is a WOUND PRIMARY current sense transformer with 20A peak primary current, 1330uH secondary inductance, and 1:100 turns ratio. Ideal for AEC-Q200 approved applications requiring high accuracy current sensing at temperatures ranging from -40 to 125°C.
PE-63619NL
PE-63619NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with VDE approval. It offers inductance of 80000 uH, load resistance of 4.5 ohm, and operates b/w -40 to 125 °C. Ideal for through hole mounting applications in various electronic devices.
B82801B0984A070
TDK
The TDK B82801B0984A070 is a WOUND PRIMARY current sense transformer with 20A peak primary current and 980uH secondary inductance. Ideal for applications requiring precise current sensing at frequencies ranging from 50kHz to 1MHz, it features a compact size of L8.38xB7.11xH5.08mm and can operate b/w -40°C to 125°C temperatures.
5382
Api Technologies
5382 by Api Technologies is a BAR PRIMARY current sense transformer with peak primary current of 120A. It features dimensions of L38.1xB14.22xH38.1mm and load resistance of 1Ω, suitable for through hole mounting applications in various electronic devices.
53070C
Murata Manufacturing's 53070C is a WOUND PRIMARY current sense transformer with peak primary current of 10A. Measuring 5.4mm in height, 7.2mm in width, and 8.3mm in length, it has load resistance of 4.5Ω. Ideal for surface mount applications requiring precise current sensing capabilities.
CSE187L-P
Triad Magnetics
CSE187L-P by Triad Magnetics is a WOUND PRIMARY current sense transformer with 4000V isolation voltage. It has an output current of 30A and dimensions of L22.22xB22.22xH18.29 (mm). Ideal for SIGNAL applications, it operates b/w -40 to 105 °C with a turns ratio of 1:500 at a max frequency of 0.4 KHz.
749251030
Wuerth Elektronik & Kg
749251030 by Wurth Elektronik is a WOUND PRIMARY current sense transformer with an isolation voltage of 500V and inductance of 180uH. It is designed for POWER applications, offering a peak primary current of 20A and output current of 10A. With dimensions L7.7xB6.9xH5.33 (mm), it operates b/w -40 to 125 °C and has a turns ratio of 1:30 at a max frequency of 1000 KHz.
CST2-070LC
CST2-070LC by Coilcraft is a WOUND PRIMARY current sense transformer with 980uH inductance, 20A primary current peak, and 500V isolation voltage. Ideal for SIGNAL applications, it operates b/w -40 to 125°C with a frequency range of 13KHz to 1MHz.
FIS115NL
FIS115NL by Pulse Electronics is a WOUND PRIMARY current sense transformer with 25A peak primary current, 18000uH secondary inductance, and 1:100 turns ratio. Ideal for applications requiring precise current sensing in circuits operating up to 500KHz frequency.
CSE187L
CSE187L by Triad Magnetics is a WOUND PRIMARY current sense transformer with 2500V isolation voltage and 30A output current. Ideal for SIGNAL applications, it operates b/w -30 to 95 °C with dimensions of L21.84xB18.29xH18.03 mm, featuring a turns ratio of 1:500 and max input voltage of 240V at 0.4 KHz frequency.
PE-68280NLT
PE-68280NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 15A peak primary current. It has dimensions of L12.57xB12.45xH7.11 (mm) and inductance of 14800uH, suitable for surface mount applications at temperatures ranging from -40 to 130 °C.
PA0368.050NLT
PA0368.050NLT by Pulse Electronics is a WOUND PRIMARY current sense transformer with 4A peak primary current and 1700uH secondary inductance. It operates b/w -40 to 130°C, suitable for surface mount applications at frequencies ranging from 50kHz to 1MHz.
5302
5302 by Api Technologies is a BAR PRIMARY current sense transformer with peak primary current of 10A. With dimensions of 25.15mm x 12.5mm x 23.647mm, it operates at frequencies from 0.05KHz to 100KHz and has a nominal input voltage of 1.32V. Ideal for applications requiring precise current sensing in circuits with load resistance of 100 ohm.
CST2020-100L
Coilcraft CST2020-100L is a WOUND PRIMARY current sense transformer with 1:100 turns ratio. It has a peak primary current of 40A and inductance of 7070uH. Ideal for applications requiring high accuracy current sensing at frequencies up to 1.3KHz, such as automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved