Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: PA0905; Width: 25.4 mm; Packing Method: TRAY; Inductance (Primary): 480 uH;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF Transformers PA0905G attributes and parameters. Explore more RF Transformers devices from Pulse Electronics
Height:
Length:
Manufacturer Series:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Transformer Type:
Width:
PA0905G Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
EU2B-YS3203C
Idec
ROTARY SWITCH;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
BD3150N50100AHF
Anaren
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 1.04 mm; Minimum Operating Temperature: -55 Cel; Length: 1.04 mm; Maximum Operating Temperature: 85 Cel;
WB3010-SMLD
Coilcraft
Coilcraft's WB3010-SMLD RF Transformer offers 780uH inductance, operates b/w -40 to 85°C, with a frequency range of 0.005 GHz to 100 MHz. Ideal for surface mount applications in RF circuits.
WBC1-1LC
Coilcraft's WBC1-1LC RF Transformer offers low 0.4 dB insertion loss, 10 uH primary inductance, and 600 MHz max cutoff frequency. Ideal for surface mount applications in RF circuits operating b/w -40 to 85°C.
ADT1-1WT-1
Mini-circuits
The Mini-circuits ADT1-1WT-1 RF Transformer has a power rating of 0.25W, insertion loss of 1dB, and max DC unbalance current of 30mA. It is designed for signal applications with a min cutoff frequency of 1GHz and operates in temperatures ranging from -20°C to 85°C. Ideal for surface mount installations, it comes in tape & reel packaging and measures L7.87xB5.59xH2.84mm.
TC1-1-13M-23+
Mini-circuits TC1-1-13M-23+ RF Transformer features 3dB insertion loss, 4.5GHz min cutoff freq, and 3000MHz max cutoff freq. Ideal for surface mount applications in RF circuits with dimensions L3.81xB3.81xH4.06mm and temp range -40 to 85°C.
ADT2-1T
Mini-circuits' ADT2-1T RF Transformer has a power rating of 0.25W with insertion loss of 3dB. It is ideal for matching applications, operating b/w -20 to 85°C, and supports frequencies from 400KHz to 450MHz. This surface mount transformer features dimensions of L7.87xB5.59xH2.84mm and can handle max DC unbalance current of 30mA.
SWB1010-SMLB
Coilcraft's SWB1010-SMLB RF Transformer offers inductance of 780uH, max cutoff freq of 100MHz, and min cutoff freq of 0.005GHz. Ideal for RF applications with surface mounting feature. Operating temp range -40 to 85°C makes it versatile for various electronic designs.
BALFLB-WL-08D3
STMicroelectronics
STMicroelectronics' BALFLB-WL-08D3 RF Transformer offers 2.2 dB Insertion Loss, 470 GHz Min Cutoff Frequency, and 105°C Max Operating Temp. Ideal for applications requiring Surface Mounting, with a frequency range of 470 MHz to 510 MHz.
0900BL18B100E
Johanson Technology
Johanson Technology's 0900BL18B100E RF Transformer offers low insertion loss of 1 dB, operates b/w -40 to 85°C, and has a cutoff frequency range from 800 MHz to 1000 MHz. Ideal for surface mount applications in RF circuits requiring precise signal transformation with compact dimensions.
ADT1-1WT
The Mini-circuits ADT1-1WT RF Transformer has a power rating of 0.5W, insertion loss of 3dB, and max DC unbalance current of 30mA. Ideal for matching applications with frequency range from 400KHz to 800MHz. Compact dimensions L7.87xB5.59xH2.84 (mm) make it suitable for surface mount installations in various RF systems.
ETC1-1T-5TR
M/a-com Technology Solutions
RF TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Dimensions: L3.81XB2.79XH3.81 (mm); Insertion Loss: 2 dB; Length: 3.81 mm;
BALF-112X-02D3
STMicroelectronics' BALF-112X-02D3 RF Transformer offers -1.9 dB insertion loss, 431 GHz min cutoff frequency, and 436 MHz max cutoff frequency. Ideal for RF applications with surface mounting feature, operating b/w -40°C to 85°C temperature range.
WBC16-1TLB
The Coilcraft WBC16-1TLB is a RF transformer with 0.25W power rating, 5uH inductance, and 0.8dB insertion loss. Ideal for isolation applications with 300V isolation voltage, it operates b/w -40 to 85°C and has dimensions of L4.45xB4.19xH3.05mm for surface mounting method.
2450BM15A0002E
2450BM15A0002E by Johanson Technology is an RF Transformer with 1.7 dB Insertion Loss, operating b/w -40 to 125°C. With dimensions of L2.01xB1.24xH0.71 mm, it has a frequency range from 2400 GHz to 2500 MHz, suitable for surface mount applications in RF circuits.
CX2078NL
Pulse Electronics
CX2078NL by Pulse Electronics is a RF Transformer with 0.6 dB Insertion Loss, 5 GHz Min Cutoff Freq, and 500 MHz Max Cutoff Freq. Ideal for applications requiring Surface Mounting, it has dimensions of L4.3xB2.69xH3.0 mm and operates b/w -40 to 85°C temperatures.
PWB-2-BLC
Coilcraft's PWB-2-BLC RF Transformer offers 0.25W power rating, 300V isolation voltage, and 0.35dB insertion loss. Ideal for signal applications with inductance of 75uH, it operates b/w -40 to 85°C and has a max cutoff frequency of 400MHz. This surface mount transformer is compact at L6.48xB7.2xH4.45mm, making it suitable for various RF signal processing tasks.
WB2010-SMLD
WB2010-SMLD by Coilcraft is a RF transformer with an inductance of 780 uH. It has dimensions of L8.26XB7.24XH5.72 (mm) and can operate at temperatures ranging from -40 to 85 °C. This surface mount transformer is commonly used in RF applications with a cutoff frequency range of 0.005 GHz to 100 MHz.
WBC16-1TLC
WBC16-1TLC by Coilcraft is a RF transformer with 0.25W power rating, 300V isolation voltage, and 0.8dB insertion loss. Ideal for isolation applications, it operates b/w -40 to 85°C temperatures and has a min cutoff frequency of 0.6GHz.
BAL-CW1250D3
BAL-CW1250D3 by STMicroelectronics is a surface mount RF transformer with an insertion loss of just 0.97 dB. It operates b/w 2400 MHz and 2500 MHz, making it ideal for high-frequency applications. With a compact size of 1.25mm x 1.04mm, it suits space-constrained designs.
BALFHB-WL-02D3
RF TRANSFORMER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved