Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER; Maximum DC Resistance: .28 ohm; Dimensions: L6.6XB6.22XH5.5 (mm)/L0.26XB0.245XH0.217 (inch); Maximum Operating Temperature: 70 Cel; No. of Terminals: 8; Mounting Type: SURFACE MOUNT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters H6505NL attributes and parameters. Explore more Data Line Filters devices from Pulse Electronics
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Width (mm):
H6505NL Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Sangdest Microelectronics (Nanjing)
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Fairchild Semiconductor
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Plessey Semiconductors Discrete Components Div
Other Transistors;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
MH1608-601Y
Bourns
The Bourns MH1608-601Y is a chip bead data line filter with 2 terminals, offering 0.2 Mohm insulation resistance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55 to 125°C and has a max frequency of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 600 ohms.
DLW21HN670SQ2L
Murata Manufacturing
Murata Manufacturing's DLW21HN670SQ2L is a data line filter with 2 functions, rated voltage of 50V, and insulation resistance of 10 Mohm. It operates b/w -40 to 85 °C and has dimensions of L2.0xB1.2xH0.9 mm. Ideal for applications requiring a DC resistance of 0.35 ohm and output impedance of 67 OHM in surface mount configurations.
ILHB0805ER601V
Vishay Intertechnology's ILHB0805ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies up to 100 MHz.
BLM18PG471SH1D
BLM18PG471SH1D by Murata is a chip bead data line filter with AEC-Q200 screening. It has 2 terminals, measures 1.6x0.8x0.8mm, and offers an output impedance of 470 ohm at a rated current of 1A. Ideal for surface mount applications, it operates b/w -55 to 125°C and is designed for frequencies ranging from 100 MHz with max DC resistance of 0.2 ohm.
FBMH3225HM102NTV
Taiyo Yuden
Taiyo Yuden's FBMH3225HM102NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -40°C to 125°C, offering a max DC resistance of 0.1 ohm and an output impedance of 1000 ohm. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
FLT007A0-SRZ
Ge Industrial Solutions
DATA LINE FILTER MODULE; Maximum DC Resistance: .025 ohm; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Approvals (V): CSA; EN; UL; VDE; Height: 12.2 mm;
744235510
Wuerth Elektronik & Kg
Wurth Elektronik 744235510 is a Data Line Filter with 2 functions, rated at 60V. With inductance of 51uH and max DC resistance of 1 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with output impedance of 3000 OHM.
744233670
Wurth Elektronik 744233670 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has approval from IEC and is used for filtering data lines in electronic applications.
4400-076LF
Cts
4400-076LF by Cts is a data line filter with a rated voltage of 200V and a max insertion loss of 28dB. It is a panel mount filter with a capacitance of 100uF, suitable for applications requiring noise suppression in data lines.
BKP1005HS121-T8
BKP1005HS121-T8 by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1mm length, 0.5mm width, and 0.5mm height, it offers an output impedance of 120Ω and rated current of 1A. Ideal for surface mount applications in various electronic devices requiring noise suppression.
BNX023-01L
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
744212510
The Wurth Elektronik 744212510 is a data line filter with a rated voltage of 80V and inductance of 51uH. It has a max operating temperature of 105°C and is suitable for surface mount applications.
BLM21PG300SN1D
BLM21PG300SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.014 ohm, it offers output impedance of 30Ω at 100MHz. Ideal for data line filtering applications due to its compact size and high rated current of 2.3A.
MMZ1608S601ATA00
TDK
TDK's MMZ1608S601ATA00 is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and min operating temperature of -55°C. This surface mount filter, measuring L1.6XB0.8XH0.8 (mm), is commonly used for impedance matching in electronic circuits.
MMZ1005S601CT000
The TDK MMZ1005S601CT000 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1x0.5x0.5mm and a max operating temperature of 125°C, it offers low DC resistance of 0.6 ohm and output impedance of 600 ohm. This ferrite chip filter is suitable for use in electronic devices requiring noise suppression on data lines.
BLM15AG601SN1D
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
NVT4858HKZ
NXP Semiconductors
DATA LINE FILTER;
NUF6400MNTBG
NUF6400MNTBG by Onsemi is a 6-function data line filter with 30 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data transmission systems.
NFM41CC222R2A3L
Murata's NFM41CC222R2A3L is a data line filter with 100V rated voltage, 2200uF capacitance, and -55 to 125°C operating temperature range. It features FEED THROUGH CAPACITOR type and is ideal for applications requiring high insulation resistance and surface mounting type.
BLM15EG121SN1D
Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pulse Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved