Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 16; Termination Contact Finish: GOLD (15) OVER NICKEL; Body or Shell Style: JACK;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Telecom & Datacom Connectors E5J88-00AJG3-L attributes and parameters. Explore more Telecom & Datacom Connectors devices from Pulse Electronics
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
Option:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
E5J88-00AJG3-L Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1-2301994-0
TE Connectivity
TE Connectivity 1-2301994-0 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It has 8 contacts, right-angle mounting style, and solder termination. Ideal for telecom and datacom applications requiring reliable board-mounted connectors with polarization key.
745400401
Molex
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE/MALE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
215877-1
TE Connectivity's 215877-1 is a telecom and datacom connector with a body length of 0.598", insulation resistance of 500MΩ, and a body width of 0.453". It is commonly used in board mounting applications, offering durability with 750 cycles.
1543
Aptiv
1543 by Aptiv is a Telecom & Datacom Connector with insulator material GLASS FILLED POLYAMIDE, shell finish NICKEL/TIN, and connector type TELECOM AND DATACOM CONNECTOR. It features mounting type BOARD, shell material BRASS/STEEL, and termination type SOLDER/SURFACE MOUNT. Ideal for male contact gender applications in telecommunications and data communication systems.
1705549-1
TE Connectivity's 1705549-1 is a Telecom & Datacom Connector with EMI shielding, UL94V-0 flammability rating, and brass shell material. It has 8 contacts, operates b/w -40 to 70°C, and supports a rated current of 1.5A. Ideal for surface mount applications in telecom and datacom equipment.
2301994-2
TE Connectivity's 2301994-2 is a Telecom & Datacom Connector with EMI shielding, Liquid Crystal Polymer insulator, and nickel-plated brass shell. It features 8 contacts in a right-angle jack style for board mounting applications. Operating temperature range from -40 to 85°C makes it suitable for various telecom and datacom systems.
61400826021
Wuerth Elektronik & Kg
61400826021 by Wurth Elektronik is a USB connector with gold finish, suitable for telecom & datacom applications. Featuring a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting with solderable retention clips and offers durability up to 1500 cycles.
3012
Winchester Interconnect
TELECOM AND DATACOM CONNECTOR; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Filter Feature: NO; IEC Conformity: NO;
USB4110-GF-A
Global Connector Technology
USB4110-GF-A by Global Connector Technology is a USB connector with 16 contacts, matte tin finish, and polyethylene insulator. It has a dielectric voltage of 100VAC and operates b/w -40 to 85°C. Ideal for telecom/datacom applications due to its right-angle mounting style and surface mount termination type.
MUSB-E151-34
Amphenol
MUSB-E151-34 by Amphenol is a USB connector with gold-plated contacts, suitable for telecom/datacom applications. It features a dielectric voltage of 100VAC, insulation resistance of 100M ohm, and operates b/w -40 to 105°C. With a compact design and high reliability, it offers a total of 5 contacts in a right-angle receptacle style for board or panel mounting.
104004-0505
Telecom and Datacom Connectors; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED;
85502-5007
Molex 85502-5007 is a Telecom & Datacom Connector with LCP insulator, matte tin finish, and brass contacts. It has 6 female contacts, operates b/w -40 to 85°C, and mounts on PCBs using solder posts. Ideal for commercial telecom applications requiring right-angle mounting and surface mount termination.
2013595-3
TE Connectivity's 2013595-3 is a Telecom & Datacom Connector with EMI shielding, polyethylene insulator, and nickel shell finish. With UL certification and 8 contacts, it operates b/w -40 to 85°C for applications in telecom and datacom systems requiring polarized connectors with a rated current of 1.5A.
HFJ11-1G41E-L12RL
Halo Electronics
HFJ11-1G41E-L12RL by Halo Electronics is a Telecom & Datacom Connector with gold-plated contacts, 8 total contacts, and a right-angle mounting style. It features a polarized housing, board mounting option with PEG, and operates b/w 0 to 70°C. Ideal for telecom and datacom applications requiring reliable signal transmission on PCBs with mixed contact patterns.
5557786-1
TE Connectivity 5557786-1 is a Telecom & Datacom Connector with EMI Shielding, Matte Tin finish, and PCT Polyester insulator. It has 8 contacts, rated for 1.5A signal current, suitable for board and panel mounting applications. Operating temperature range from -40 to 85°C makes it ideal for commercial use.
HDR-EA26LMYPG1+
Honda Tsushin Kogyo
HDR-EA26LMYPG1+ by Honda Tsushin Kogyo is a 26-contact telecom/datacom connector with gold-nickel termination, glass-filled polyphenylene sulfide insulator, and nickel shell. It is a male right-angle surface mount connector suitable for board and panel mounting applications in the telecom and datacom industry. UL 94V-0 flammability code ensures safety compliance.
2013595-1
TE Connectivity's 2013595-1 is a Telecom & Datacom Connector with EMI shielding and UL 94V-0 flammability rating. Featuring polarized design, it has 8 contacts, copper alloy shell, and polyethylene insulator. Ideal for telecom applications with operating temperatures from -40 to 85°C.
10126-6000EC
3m Electronic Products Division
10126-6000EC by 3M Electronic Products Division is a Telecom & Datacom Connector with a Mating Contact Pitch of 0.05", Insulation Resistance of 100MΩ, and Dielectric Withstanding Voltage of 700VAC. Ideal for telecom applications, this connector features gold over nickel termination contact finish and glass-filled polyester insulator material.
HFJ11-2450E-L11RL
HFJ11-2450E-L11RL by Halo Electronics is a Telecom & Datacom Connector with gold finish, 8 contacts, and polarized housing. It has a body length of 0.625", width of 0.537", and depth of 0.85". Ideal for board mounting applications in telecom and datacom systems with operating temperatures ranging from 0 to 70°C.
RJE01-660-01
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pulse Electronics
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved