Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
1000B-5001FXNL by Pulse Electronics is a Datacom Transformer with 4 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). It is used for 10/100/1000 BASE-T applications, operates b/w -55 to 125 °C, and features surface mounting method.
Median Price
$37.580
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$44.890
100+ parts
$39.280
1k+ parts
-
10k+ parts
Arrow
TTI
$35.240
$34.200
$33.860
Nova Conductors
$20.200
Vyrian
VNN
Sunrise Surplus Inc.
AZTECH Wire
$9.563
Bastille Electronics
$19.190
$17.978
Authorized Procurement Solutions
Perfect Parts
Glotronic Ltd.
Having 4 functions allows for versatile applications and functionality in various systems.
Provides efficient inductance for optimal performance in pulse and data communication applications.
Tube packing ensures easy handling and storage of the transformers, making them convenient to use.
Compact dimensions make it suitable for use in space-constrained environments without compromising on performance.
Ideal for use in high-speed Ethernet networks, ensuring reliable data transmission.
Capable of operating at high temperatures without affecting performance, ensuring product reliability.
Can withstand low temperatures, making it suitable for use in a wide range of environmental conditions.
Specifically designed for data communication applications, ensuring compatibility and optimized performance.
Surface mount design facilitates easy installation on circuit boards, saving space and enhancing efficiency.
Provides equal primary and secondary turns ratio, ensuring efficient signal transformation and accurate data transmission.
Pulse & Datacom Transformers 1000B-5001FXNL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Pulse Electronics
Additional Features:
Application:
Height:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
1000B-5001FXNL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Pulse, a member of the YAGEO Group (2327, TAI), was founded in 1956 and is a leader in technology, design and manufacturing of power and signal magnetics, current sensing, antennas, and connectors. Pulse products can be found in a wide range of applications including electric vehicles, 5G mobile network systems, smart grids, wearables. Lighting, cell phones, datacenters, wireless charging, industrial automation equipment and security.
EU2B-YS3103F
Idec
ROTARY SWITCH;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ROHM
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Fagor Electronica S Coop
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Loras Industries
SM91071AL-E
Bourns
Bourns SM91071AL-E is a DATACOM TRANSFORMER with 1500V isolation voltage, 350uH inductance, and AEC-Q200 approval. Ideal for 10/100 BASE-T applications, it operates b/w -40 to 125 °C with a compact size of 12.8mm x 6.9mm x 5.65mm for surface mount installation.
M21038/27-05
Pulse Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Length: 12.7 mm; Minimum Operating Temperature: -55 Cel; Dimensions: L12.7XB8.89XH6.35 (mm);
749020023A
Wuerth Elektronik & Kg
The Wurth Elektronik 749020023A is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. It has inductance of 350uH, suitable for 10/100/1000 BASE-T applications. With a compact size of 15.1x10x4.25mm and surface mount feature, it operates b/w -40 to +85°C temperature range.
M-21038/27-05
Data Device
Data Device's M-21038/27-05 is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage and 150ns max pulse rise time. Measuring L12.7xB8.89xH6.35 mm, it operates b/w -55°C to 130°C. Ideal for applications requiring precise signal transmission in compact spaces.
TG110-RPE5N5LF
Halo Electronics
TG110-RPE5N5LF by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage. Measuring L12.7xB7.11xH6.35 (mm), it operates b/w -40 to 85 °C, ideal for 10/100 BASE-TX Ethernet applications. Features matte tin terminal finish and surface mounting feature.
HM0068ANLT
HM0068ANLT by Pulse Electronics is a Datacom Transformer with 2 functions and 1500V isolation voltage. It features primary inductance of 350uH, operates b/w -40 to 105°C, and has dimensions of L12.7xB8.81xH2.08 mm. Ideal for surface mount applications in data communication systems due to its compact size and high isolation capabilities.
1009
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Minimum ET Product: 550 V-us; Dimensions: 15.06mm X 15.06mm X 15.75mm;
HM2103NL
HM2103NL by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approvals. It operates b/w -40 to 125°C and has a nominal input voltage of 1000V. Ideal for surface mount applications in pulse & datacom systems.
7498011211
Wurth Elektronik 7498011211 transformer with 1500V isolation voltage, 350uH inductance, and UL approval. Ideal for 10/100 BASE-T applications. Measures 21.7x15.9x13.5mm, operates b/w -40°C to 85°C, and features a 1:1 turns ratio for through-hole mounting.
749020010A
Wurth Elektronik's 749020010A is a Pulse & Datacom Transformer with UL approval and 1500V isolation voltage. It has 4 functions, 1dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 1000 BASE-T, it operates b/w -40 to 85°C with dimensions L17.5xB14.20xH6.50mm for surface mounting.
SM91501ALO-E
Bourns SM91501ALO-E is a DATACOM TRANSFORMER with 2 functions, 150uH primary inductance, and 4300V isolation voltage. It operates b/w -40 to 125 °C and has a turns ratio of 1:1. Ideal for pulse & datacom applications requiring high isolation and inductance.
H5007NL
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Height: 5.51 mm; Application: 1000 BASE-T;
P0584NL
P0584NL by Pulse Electronics is a pulse transformer used for gate drive applications. It has an isolation voltage of 3000 V, inductance of 450 uH, and operates b/w -40 to 125 °C temperature range.
H5020NLT
H5020NLT by Pulse Electronics is a datacom transformer with 4 functions and windings. It offers an isolation voltage of 1500V and insertion loss of 1dB, suitable for applications like 1000BASE-T. With dimensions of L27.94xB7.54xH8.33 (mm) and surface mounting feature, it operates b/w -40°C to +85°C at frequencies up to 100MHz.
96046123229
Littelfuse
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 13.5 mm; No. of Functions: 2; Length: 14 mm; Isolation Voltage: 1875 V;
PM-DB2745S+
Holt Integrated Circuits
PM-DB2745S+ by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with 4000Ω impedance, suitable for DATA BUS INTERFACE applications. It operates b/w -55°C to 130°C, has 3 windings, and dimensions of L23.62xB16.0xH3.937 mm, making it ideal for surface mount installations.
H1164NLT
H1164NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval. Ideal for surface mount installations with dimensions of L28.58xB12.19xH5.84 mm.
750311889
Wurth Elektronik 750311889 is a Pulse & Datacom Transformer with 500V isolation voltage, 37uH inductance, and 0.1A output current. Ideal for surface mount applications in data communication systems due to its compact dimensions and high operating temperature range of -40 to 125°C.
1016
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Application: GENERAL PURPOSE; Width: 15.06 mm;
DA2320-ALB
Coilcraft
Coilcraft's DA2320-ALB is a pulse transformer with 1500V isolation voltage, 264uH primary inductance, and 24.5 V-us min ET product. Ideal for gate drive applications, this surface-mount transformer operates b/w -40 to 125°C with a compact size of L6.6xB5.0xH5.4 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1000B-5002XNL
1000B-5002XNL by Pulse Electronics is a Datacom Transformer with 8 functions, inductance of 350uH, and dimensions L17.53xB12.19xH5.72 (mm). Ideal for 10/100/1000 BASE-T applications, it operates b/w -55 to 125 °C and features surface mounting method.
1000B-5001FXNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Additional Features: HEIGHT DIMENSION INCLUDES TERMINALS ALSO;
1000B-5002XNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; Inductance (Primary): 350 uH; Length: 17.53 mm; Packing Method: TR;
1000B-5001XNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Application: 10/100/1000 BASE-T; Minimum Operating Temperature: -55 Cel; Dimensions: L17.53XB12.19XH5.72 (mm); Packing Method: TAPE & REEL; TUBE;
1000B-5002XT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO; Height: 5.72 mm; Turns Ratio (Np:Ns): 1:1; 1:1; Maximum Operating Temperature: 125 Cel;
1000B-5001FNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Length: 17.53 mm; Turns Ratio (Np:Ns): 1:1; Maximum Operating Temperature: 85 Cel; No. of Functions: 4;
1000B-5001FNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L17.53XB12.19XH5.72 (mm); Maximum Operating Temperature: 85 Cel; Length: 17.53 mm; Packing Method: TUBE;
1000B-5001FT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Height: 5.72 mm; Application: 10/100/1000 BASE-T; Additional Features: HEIGHT DIMENSION INCLUDES TERMINALS ALSO;
1000B-5001FXT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Application: 10/100/1000 BASE-T; Height: 5.72 mm; Length: 17.53 mm;
1000B-5001FX
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; Minimum Operating Temperature: -55 Cel; Application: 10/100/1000 BASE-T; Width: 12.19 mm;
1000B-5001F
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Turns Ratio (Np:Ns): 1:1; Maximum Operating Temperature: 85 Cel; Application: 10/100/1000 BASE-T; Minimum Operating Temperature: -40 Cel;
Pulser
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TUBE; Height: 5.72 mm; Isolation Voltage: 1500 V; Dimensions: L17.53XB12.19XH5.72 (mm);
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; Application: 10/100/1000 BASE-T; Inductance (Primary): 350 uH; Turns Ratio (Np:Ns): 1:1;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Functions: 4; Height: 5.72 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 125 Cel; Height: 5.72 mm; JESD-609 Code: e0;
1000B-5001FXNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 4; Packing Method: TUBE; Maximum Operating Temperature: 125 Cel; Height: 5.72 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Dimensions: L17.53XB12.19XH5.72 (mm); Turns Ratio (Np:Ns): 1:1; Additional Features: HEIGHT DIMENSION INCLUDES TERMINALS ALSO; Height: 5.72 mm;
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; Application: 10/100/1000 BASE-T; Length: 17.53 mm; Dimensions: L17.53XB12.19XH5.72 (mm);
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; No. of Functions: 4; Turns Ratio (Np:Ns): 1:1;
1000B-5001XNLT
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): IEEE; No. of Functions: 4; Isolation Voltage: 1500 V; Maximum Operating Temperature: 125 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved