Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HALF BRIDGE BASED MOSFET DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 13; Package Code: SZIP; Package Shape: RECTANGULAR; Terminal Pitch: .97 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
MOSFET Gate Drivers LCS702HG-TL attributes and parameters. Explore more MOSFET Gate Drivers devices from Power Integrations
High Side Driver:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LCS702HG-TL Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications. Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Multicomp Pro
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
EU2B-YS3203F
Idec
ROTARY SWITCH;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
MIC4604YMT-T5
Microchip Technology
MIC4604YMT-T5 by Microchip Technology is a MOSFET Gate Driver with 10 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C and has a supply voltage range of 5.25V to 16V. With a turn-on/off time of 0.075 us, it offers efficient control for high side drivers in compact form factor.
LM5106MM
LM5106MM by Texas Instruments is a MOSFET gate driver with a max supply voltage of 14V and power supplies up to 12V. It features a small outline, thin profile package style suitable for automotive applications. With turn-on time of 0.69us and turn-off time of 0.056us, it provides efficient high side driver functionality in a compact form factor.
IR2181SPBF
International Rectifier
HALF BRIDGE BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MIC5014YM-TR
MIC5014YM-TR by Microchip is a MOSFET Gate Driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.75V to 30V and features high side driver functionality. Ideal for industrial applications requiring a small outline package with standard input characteristics and true output polarity.
UCC21530DWK
UCC21530DWK by Texas Instruments is a MOSFET gate driver with 2 channels, 6A output current, and built-in transient & undervoltage protections. It operates at -40 to 125°C, has a turn-on/off time of 0.03us, and supports automotive applications. With a compact design (10.3mm x 7.5mm x 2.65mm), it's ideal for high side driver configurations in automotive systems.
LM5107SD/NOPB
LM5107SD/NOPB by Texas Instruments is a MOSFET gate driver with 2 channels, 1.4A max output current, and 12V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 0.056us. Ideal for high side driving applications requiring fast switching speeds and low power consumption.
MAX4427ESA
MAX4427ESA by Maxim Integrated is a MOSFET Gate Driver with 2 functions, operating at -40 to 85°C. It has a supply voltage range of 4.5-18V and peak current limit of 1.5A, suitable for industrial applications requiring fast turn-on/off times and true output polarity in a small outline package.
TC4424CPA
TC4424CPA by Microchip Technology is a MOSFET gate driver with 2 functions, operating at supply voltages of 4.5-18V. It features Schmitt trigger input characteristics, true output polarity, and a turn-on/off time of 0.16us. Ideal for applications requiring high side drivers in commercial temperature grades.
MC33152VDR2G
MC33152VDR2G by Onsemi is a MOSFET Gate Driver with 2 functions, operating at -40 to 125 °C. It has a supply voltage range of 6.5-18 V and peak current limit of 1.5 A. Ideal for automotive applications due to its small outline package and high side driver capability.
LTC7000MPMSE#TRPBF
Linear Technology
BUFFER OR INVERTER BASED MOSFET DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.1 mm;
IXDD609SIA
IXYS Corporation
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UCC27324DGNR
UCC27324DGNR by Texas Instruments is a MOSFET gate driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 15 V and can handle an output current of 4 A. Ideal for automotive applications due to its small outline package and true output polarity.
A3941KLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3941KLPTR-T is a MOSFET gate driver with 28 terminals, suitable for automotive applications. It operates b/w -40 to 150°C, with a supply voltage range of 5.5-50V. This full bridge-based driver has a turn-on/off time of 0.15 us and nominal output peak current limit of 0.028A.
LTC7001JMSE#TRPBF
LTC7001JMSE#TRPBF by Analog Devices is a MOSFET Gate Driver with 135V max supply voltage, 10 terminals, and 150°C max operating temp. Ideal for automotive applications, it features CMOS technology, Schmitt trigger input characteristics, and a turn-on/off time of 70us.
NCP1392BDR2G
NCP1392BDR2G by Onsemi is a MOSFET Gate Driver with 12V power supply, 1A output peak current limit, and half-bridge based interface IC type. It is designed for automotive applications, operates b/w -40 to 125°C, and features a small outline package style.
ZXGD3006E6TA
Diodes Incorporated
ZXGD3006E6TA by Diodes Inc. is a MOSFET Gate Driver with 5-30V power supplies, -55 to 150°C operating temp range, and MILITARY grade. Its SMALL OUTLINE package is ideal for BUFFER OR INVERTER BASED MOSFET DRIVER applications in compact designs requiring high reliability.
LTC7001EMSE#PBF
BUFFER OR INVERTER BASED MOSFET DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
1EDN7550UXTSA1
Infineon Technologies
1EDN7550UXTSA1 by Infineon Technologies is a MOSFET Gate Driver with 6 terminals, operating voltage range of 4.5V to 20V, and high side driver capability. It features a small outline package with dimensions of 1.5mm x 1.1mm x 0.4mm, suitable for applications requiring fast turn-on/off times such as power electronics and motor control systems.
LTC7001JMSE#PBF
LTC7001JMSE#PBF by Analog Devices is a MOSFET Gate Driver with 135V max supply voltage, -40 to 150°C operating temp range, and 10 terminals. Ideal for automotive applications, it features CMOS technology, Schmitt trigger input characteristics, and 70us turn-on/off time.
DRV8706HQRHBRQ1
DRV8706HQRHBRQ1 by Texas Instruments is a MOSFET gate driver with a max supply voltage of 37V, suitable for automotive applications. It features push-pull output characteristics and operates in a temperature range from -40°C to 125°C. With a turn-on time of 0.85us and turn-off time of 0.6us, it offers efficient control for half-bridge based MOSFET drivers.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Power Integrations
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved