Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.25 inch; Minimum Operating Temperature: -65 Cel; Insulator Material: GLASS FILLED DIALLYL PHTHALATE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Rack & Panel Connectors GMCT14F0E100JC/AA attributes and parameters. Explore more Rack & Panel Connectors devices from Positronic Industries
Body Width:
Body Depth:
Body Length:
Connector Type:
Contact Gender:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
GMCT14F0E100JC/AA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
At Positronic, we build high reliability power and signal connectors. But our true call is to provide certainty. Rock solid, mission-critical performance upon which you can bank life and limb, family and fortune. We consider it an honor. We consider it an inviolable trust.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1554216004
Molex
WIRE AND CABLE;
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Diotec Semiconductor Ag
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
DMC-MD82B3101
TE Connectivity
TE Connectivity's DMC-MD82B3101 is a 3.39" long, 0.6" wide, and 1.055" deep rack & panel connector with EMI shielding. It has a rated voltage of 125V and can operate in temperatures ranging from -65 to 175°C. This polarized connector with an aluminum alloy shell is suitable for various applications requiring crimp termination and multiple mating parts availability.
SMS3R-1
Souriau
RACK AND PANEL CONNECTOR; Contact Gender: FEMALE; UL Flammability Code: 94V-2; Mating Contact Finish: NOT SPECIFIED; Mounting Type: CABLE AND PANEL; DIN Conformance: NO;
DMC-MD24B
TE Connectivity's DMC-MD24B is a Rack & Panel Connector with EMI shielding and gold-nickel termination. Rated for 125V, it operates b/w -65 to 175°C. Ideal for applications requiring a polarized, female receptacle with latching mounting on panels.
DL1-156RW4B
Itt Cannon
DL1-156RW4B by ITT Cannon is a 156-contact rack & panel connector with plastic insulator. It features wire wrap termination, female contact gender, and UL 94V-1 flammability code. Ideal for panel mounting applications requiring high-density connections.
SIMM0816PN
Amphenol
Amphenol's SIMM0816PN is a Rack & Panel Connector with 8 contacts, male gender, and crimp termination. It features an empty shell for customization and supports cable and panel mounting. Ideal for industrial applications requiring reliable connectivity in limited space.
1651450000
Weidmueller & Kg
1651450000 by Weidmueller & Kg is a Rack & Panel Connector with GOLD contact finish, GLASS FILLED POLYCARBONATE insulator, and 16 contacts. It is a RACK AND PANEL CONNECTOR for cable/panel mounting with UL 94V-0 flammability rating. Ideal for applications requiring reliable male crimp connectors in electronic systems.
201298-1
TE Connectivity's 201298-1 is a Rack & Panel Connector with Mating Contact Pitch of 0.15", Insulation Resistance of 100M ohm, and Rated Voltage of 250V. Ideal for applications requiring a connector with high insulation resistance, suitable for temperatures ranging from -55 to 150°C.
DMC-MD24N
Deutsch
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; Insulator Material: POLYETHYLENE; Manufacturer Series: DMC-MD;
2102442-1
TE Connectivity 2102442-1 is a Rack & Panel Connector with operating temp. range of -65 to 125°C. It has 2 contacts, rated at 1.5A for signal current. Ideal for board mounting applications due to solder termination and female contact gender.
DL1-156P
The ITT Cannon DL1-156P is a 156-contact rack & panel connector with 0.1" pitch, suitable for applications requiring high insulation resistance of 5Gohm and dielectric voltage withstand of 1200VAC. With a temperature range from -55 to 105°C, it features crimp termination, male contact gender, and durability up to 10k cycles. Ideal for commercial use in panels needing reliable signal connections.
208100-1
TE Connectivity's 208100-1 is a Rack & Panel Connector with 0.25" Mating Contact Pitch, rated for 600V and -55 to 130°C operating temperatures. Ideal for cable mounting applications, this female connector features a total of 19 contacts in a polarized housing with solder termination.
BKAD1-125-30001F0
ITT Cannon's BKAD1-125-30001F0 is a Rack & Panel Connector with 125 contacts, GOLD OVER NICKEL finish. It features Mixed Contacts and THERMOSET insulator material. Ideal for cable and panel mounting applications.
SB611MG05W2P0001AN
Amphenol Communications Solutions
Amphenol's SB611MG05W2P0001AN Rack & Panel Connector features 125 contacts with gold over nickel finish. It is a male plug type connector with mixed contacts, suitable for cable and panel mounting applications. The shell is made of aluminum alloy, ensuring durability and reliable performance.
207152-1
TE Connectivity 207152-1 is a Rack & Panel Connector with Mating Contact Pitch of 0.197". It has Insulation Resistance of 100MΩ, rated Voltage of 600V, and operates b/w -55°C to 130°C. Ideal for commercial applications requiring durable connectors with polarized housing and UL94V-0 flammability rating.
JF1P1SA
Winchester Interconnect
JF1P1SA by Winchester Interconnect is a Rack & Panel Connector with 0.28" Mating Contact Pitch, 1500VAC Dielectric Withstanding Voltage, and -55 to 125 °C Operating Temperature range. Ideal for commercial applications requiring a reliable male connector with 2 contacts, suitable for 20 AWG wire size and solder termination on plug/receptacle body style.
SMS3P-1
Burndy
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Additional Features: POLARIZED; Total No. of Contacts: 3;
DMC-MD24B-K-T
TE Connectivity's DMC-MD24B-K-T is an EMI shielded rack & panel connector with 125V rated voltage. Operating from -65 to 175°C, it features a polarized B key and composite shell material. Ideal for applications requiring a latching receptacle with one connector on panels at 115/230VAC mains rating.
DL2-96P
ITT Cannon's DL2-96P is a 96-contact rack & panel connector with 0.1" pitch, suitable for applications requiring high insulation resistance of 5Gohm and dielectric voltage withstand of 1200VAC. With a temperature range from -55 to +105°C, it offers durability up to 10k cycles in commercial settings.
VMCT34M0000Y0
Positronic Industries
VMCT34M0000Y0 by Positronic Industries is a Rack & Panel Connector with 34 contacts, rated at 7.5A signal current. It features a GLASS FILLED DIALLYL PHTHALATE insulator and operates b/w -55°C to 125°C. Ideal for applications requiring reliable cable and panel mounting with crimp termination.
SMS12P-1
RACK AND PANEL CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Total No. of Contacts: 12; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved