Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PE-0402HFB221ST by Pico Electronics is a FERRITE CHIP filter with 2 terminals, rated at 0.7A. With a width of 0.5mm and height of 0.5mm, it has an output impedance of 220Ω. Ideal for data line filtering applications, it operates b/w -40°C to 105°C efficiently in surface mount configurations.
Median Price
$0.025
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.049
1k+ parts
$0.033
10k+ parts
$0.021
DigiKey
Master Electronics
-
Verical
Arrow
$0.015
Electro Sonic
IBS Electronics
$0.039
TME
$0.028
Prism Electronics
Having 2 terminals allows for easy connectivity and installation.
Ferrite chip filters are known for their high performance in reducing electromagnetic interference.
With a high maximum operating temperature, this filter can withstand a wide range of environmental conditions.
The low minimum operating temperature ensures reliable performance even in cold environments.
The slim width of 0.5mm allows for space-saving installation in compact devices.
Low DC resistance helps in efficient power transfer and minimal energy loss.
The small length of 1mm adds to the compact design of this filter.
The output impedance of 220 ohms helps in maintaining signal integrity by reducing reflections.
Surface mounting type allows for easy and secure attachment to circuit boards.
With a rated current of 0.7A, this filter can handle moderate power loads efficiently.
The low profile height of 0.5mm ensures compatibility with slim devices.
Data Line Filters PE-0402HFB221ST attributes and parameters. Explore more Data Line Filters devices from Pico Electronics
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Rated Current:
Width (mm):
PE-0402HFB221ST Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Founded in 1967 by Mr. Joseph Sweeney and Mr. Henry Spoldi, Pico Electronics was established to improve and reduce the size of transformers and converters - which at the time were quite large. They began developing miniature and ultra-miniature units of high quality and reliability for military specifications and commercial air flight applications. With the new technologies that allow for surface mounting and other installation venues, Pico Electronics has come to be known as "the" resource for 'anything that flies' using a miniature conductor or transformer. Additionally, Pico Electronics became the experts in miniature DC to DC power converters and miniature AC to DC power supplies. Over the years Pico established itself as a leader in high voltage DC to DC output (the high voltage outputs that meet today's modern requirements of up to 10,000 volts DC). Today, Pico Electronics is constantly improving the efficiency of the power source and power factor correction, and is extending their high voltage product line. Pico offers ultra-miniature packages and high power units (up to 300 watts) as well as regulated, programmable, and dual output packages. They are able to accommodate many different input voltages in both the DC range, anywhere from 5 volts DC to 380 volts DC, and in the AC to DC range, having universal AC input. The never-ending drive to push the high voltage envelope - and the reduction of the size and weight from rack type systems into brick and half brick modules - is why Pico Electronics' DC to DC converters, transformers and inductors can be found everywhere - from the single engine aircraft to the international space station to Sojourner (the mobile module that landed on Mars).
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
Micro Commercial Components
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N2222A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
DS18B20+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
742792041
Wuerth Elektronik & Kg
Wurth Elektronik 742792041 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.4 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics for filtering frequencies from 100 MHz to 160 MHz.
BMB2A0300LN2
TE Connectivity's BMB2A0300LN2 is a 0805 case FERRITE CHIP filter with 300 OHM output impedance, 0.15 ohm DC resistance, and 0.6 A rated current. Ideal for data line filtering applications, this multilayer chip operates b/w -55 to 125 °C at frequencies ranging from 100 MHz.
51-750-309
Spectrum Control
DATA LINE FILTER; Rated Current: 10 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: D4.95XH6.32 (mm)/D0.195XH0.249 (inch); Rated Voltage: 70 V; Height: 6.32 mm;
ACM1513-551-2PL-TLHF
TDK
ACM1513-551-2PL-TLHF by TDK is a Data Line Filter with 10A rated current, 50V rated voltage, and 550 ohm output impedance. It has 2 functions and operates b/w -40°C to 85°C. Ideal for applications requiring noise filtering in data lines.
BNX022-01L
Murata Manufacturing
BNX022-01L by Murata Manufacturing is a data line filter with a rated voltage of 50V and attenuation of 35dB at max frequency. It has a compact size of L12.1XB9.1XH3.1 (mm) and is suitable for surface mount applications in various electronic devices.
74279252
Wurth Elektronik 74279252 is a multi-layer ferrite chip filter with AEC-Q200 screening. With dimensions of L4.5XB3.2XH1.5 (mm), it operates b/w -55 to 125 °C, suitable for data line filtering in automotive applications at frequencies ranging from 100 MHz to 108 MHz.
7351
Jw Miller Magnetics
DATA LINE FILTER;
FBMH2012HM221-T
Taiyo Yuden
Taiyo Yuden's FBMH2012HM221-T is an 0805 chip bead filter with 2 terminals. With a max operating temp of 85°C, it offers a DC resistance of 0.06 ohm and output impedance of 220 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and supports up to 100 MHz frequency range.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
HI1206T500R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
742792603
Wurth Elektronik 742792603 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-1000 MHz and DC resistance of 0.03 ohm. This surface mount component has dimensions of L1.6xB0.8xH0.8 mm and rated current of 4A, ideal for noise suppression in electronic circuits.
BLM03AX241SN1D
Murata Manufacturing's BLM03AX241SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.38 ohm, output impedance of 240 OHM, and rated current of 0.35 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
4400-099LF
Cts
4400-099LF by Cts is a Data Line Filter with 20000 Mohm Min Insulation Resistance, 50 V Rated Voltage, and FEED THROUGH CAPACITOR filter type. It operates b/w -55 to 125 °C, has a Max Insertion Loss of 70 dB, and a Capacitance of 50000 uF. Ideal for panel mounting applications requiring up to 10 A rated current.
ACM2012-900-2P-TL002
TDK's ACM2012-900-2P-TL002 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 50V rated voltage, and 90 OHM output impedance. Ideal for data line filtering applications due to its compact dimensions of L2.0XB1.2XH1.2 (mm) and surface mounting type.
BLM31AJ260SN1L
Murata Manufacturing's BLM31AJ260SN1L is a FERRITE CHIP filter with 2 terminals, rated at 0.5A. With dimensions of L3.2xB1.6xH1.1mm, it offers an output impedance of 26Ω and max DC resistance of 0.05Ω. Ideal for data line filtering applications due to its surface mounting type and operating temperatures ranging from -55°C to 125°C.
PBY201209T-600Y-N
Pulse Electronics
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
NFE31PT222Z1E9B
Murata Manufacturing's NFE31PT222Z1E9B is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With dimensions of L3.2XB1.6XH1.6 (mm), it operates b/w -40 to 85 °C, making it ideal for applications requiring up to 6A rated current and 2200uF capacitance in surface mount configurations.
HZ0805E601R-10
Laird Technologies
Laird Technologies' HZ0805E601R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.3 ohm and can handle up to 0.5 A rated current.
MMZ2012R102AT000
TDK's MMZ2012R102AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and min of -55°C, it offers low DC resistance of 0.3 ohm and output impedance of 1000 ohm. This surface mount ferrite chip measures L2.0xB1.25xH0.85 mm and can handle a rated current of 0.5 A.
BLM21PG331SN1B
Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pico Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved