Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-PRF-27; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Operating Frequency: 400 HZ; Output Voltage-1: 16 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Advanced Electronics
1+ parts
$1.269
100+ parts
$1.155
1k+ parts
$1.041
10k+ parts
Power & Mains Transformers 76908 attributes and parameters. Explore more Power & Mains Transformers devices from Pico Electronics
Approvals (V):
Center Tap Feature-1:
Center Tap Feature-2:
Height:
Nominal Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Secondary):
Nominal Operating Frequency:
Maximum Operating Temperature:
Output Current-1:
Output Voltage-1:
Dimensions:
Rating (Primary):
Terminal Finish:
Transformer Type:
Volt-Ampere Rating (VA):
Width:
76908 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
NSN
2915-01-085-0151, 2915010850151, 3610-01-108-9897, 3610011089897, 5310-14-503-4905, 5310145034905, 5340-01-382-0020, 5340013820020
NIIN
010850151, 011089897, 145034905, 013820020
Founded in 1967 by Mr. Joseph Sweeney and Mr. Henry Spoldi, Pico Electronics was established to improve and reduce the size of transformers and converters - which at the time were quite large. They began developing miniature and ultra-miniature units of high quality and reliability for military specifications and commercial air flight applications. With the new technologies that allow for surface mounting and other installation venues, Pico Electronics has come to be known as "the" resource for 'anything that flies' using a miniature conductor or transformer. Additionally, Pico Electronics became the experts in miniature DC to DC power converters and miniature AC to DC power supplies. Over the years Pico established itself as a leader in high voltage DC to DC output (the high voltage outputs that meet today's modern requirements of up to 10,000 volts DC). Today, Pico Electronics is constantly improving the efficiency of the power source and power factor correction, and is extending their high voltage product line. Pico offers ultra-miniature packages and high power units (up to 300 watts) as well as regulated, programmable, and dual output packages. They are able to accommodate many different input voltages in both the DC range, anywhere from 5 volts DC to 380 volts DC, and in the AC to DC range, having universal AC input. The never-ending drive to push the high voltage envelope - and the reduction of the size and weight from rack type systems into brick and half brick modules - is why Pico Electronics' DC to DC converters, transformers and inductors can be found everywhere - from the single engine aircraft to the international space station to Sojourner (the mobile module that landed on Mars).
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Diotec Semiconductor Ag
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Harris Semiconductor
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Starsea Electronics
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1291
Amecon
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Output Current-1: 20.83 A; Volt-Ampere Rating (VA): 750 VA;
F-118X
Magnetek
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; No. of Winding (Secondary): 1; Application: POWER; Center Tap Feature-1: YES;
RTMI736614
Analog Devices
Analog Devices' RTMI736614 is a 5 VA power transformer with 500V isolation voltage, ideal for applications requiring a 26V output. With a temperature range of -55 to 105 °C and nominal frequency of 400Hz, it's suitable for various power supply designs. Measuring at 38.1x50.8x114.3mm, this through-hole mounted transformer offers reliable performance in compact spaces.
74941302
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 74941302 is a power transformer with AEC-Q200 approval and 4300V isolation voltage. It features center tap, surface mounting, and operates b/w -40 to 125°C. Ideal for automotive applications due to its compact size and high isolation capabilities.
1264
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 500 VA; Nominal Operating Frequency: 60 HZ; Output Current-1: 27.78 A;
DP-241-6-16
Signal Transformer
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 241; Approvals (V): UL; CSA; Dimensions: 82.6mm X 42.8mm X 49.2mm; Isolation Voltage: 2500 V;
2050
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2050; Volt-Ampere Rating (VA): 12 VA; Output Current-1: .33 A; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
1230
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 300 VA; Output Current-1: 10 A; Nominal Operating Frequency: 60 HZ;
FS20-120-C2
Triad Magnetics
Triad Magnetics' FS20-120-C2 is a 2.5 VA power transformer with dual 115V primary rating, providing 10V output voltage and 0.12A output current for two windings. With an isolation voltage of 4200000V, this split bobbin transformer is ideal for applications requiring compact dimensions (L34.92xB28.57xH23.8 mm) and through-hole mounting features.
CE1500TH
Emerson Electric
Emerson Electric's CE1500TH is a 1500 VA power transformer with UL, CSA, IEC, and CE approvals. It has dual windings for 115V and 230V output voltages suitable for chassis mounting applications. Operating at 50/60Hz frequency, it offers a single primary rating of 230/400/460V in compact dimensions of L171.45xB162.05xH143.0 mm.
RTMI736618
Analog Devices' RTMI736618 is a 5 VA power transformer with 500V isolation voltage. Operating at -55 to 105 °C, it outputs 11.8V at 400Hz frequency. Ideal for various applications requiring reliable power conversion in compact spaces.
715
Hammond Manufacturing
The Hammond Manufacturing 715 Power Transformer is CSA approved with a 352 VA rating and output voltage of 1020 V. It features a center tap, single primary rating of 115V, and chassis mounting. Ideal for applications requiring reliable power conversion in industrial equipment or electronic devices.
16-1
Bel Fuse
Bel Fuse's 16-1 Power Transformer features dual 1A output currents, 8V output voltages, and a center tap design with isolation voltage of 1500V. Ideal for chassis mounting applications, this transformer is compact at 73mm x 50.8mm x 58.7mm, making it suitable for various power supply needs in electronics.
1026
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 10 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Output Current-1: .36 A;
DSW-420
Stancor Products
Stancor Products' DSW-420 is a UL and CSA approved power transformer with 6 VA rating, 0.3 A output current, and operates b/w -40 to 105 °C. Ideal for various applications requiring a reliable power source at 60 HZ frequency.
1115
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 50 VA; Output Current-1: .43 A;
1110
TOROIDAL POWER TRANSFORMER; Output Current-1: 1.67 A; Volt-Ampere Rating (VA): 50 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
T-1-53004
Acme Electric
POWER TRANSFORMER; Approvals (V): UL; CSA; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 50 VA; Nominal Operating Frequency: 60 HZ;
DA2303-ALB
Coilcraft
Coilcraft's DA2303-ALB is a power transformer with 2500V isolation voltage, AEC-Q200 approval, and dual 6V output. Ideal for surface mount applications, it operates b/w -40°C to 125°C and has a nominal input voltage of 5V.
STM1686612
The Analog Devices STM1686612 is a 5 VA power transformer with 500V isolation voltage. Measuring L114.3xB50.8xH38.1 (mm), it operates b/w -55°C to 105°C, outputting 90V at 400Hz frequency. Ideal for applications requiring reliable power conversion in compact spaces with gold terminal finish and through-hole mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pico Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved