Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-PRF-27; Terminal Finish: Tin/Lead (Sn/Pb); Length: 13.97 mm; Center Tap Feature-2: NO;
Median Price
$0.800
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.458
1k+ parts
$0.362
10k+ parts
$0.333
Robosynatics
-
Lucentia Tech
Power & Mains Transformers 76903 attributes and parameters. Explore more Power & Mains Transformers devices from Pico Electronics
Approvals (V):
Center Tap Feature-1:
Center Tap Feature-2:
Height:
Nominal Input Voltage (V):
JESD-609 Code:
Length:
Mounting Feature:
No. of Winding (Secondary):
Nominal Operating Frequency:
Maximum Operating Temperature:
Output Current-1:
Output Voltage-1:
Dimensions:
Rating (Primary):
Terminal Finish:
Transformer Type:
Volt-Ampere Rating (VA):
Width:
76903 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
NSN
3120-01-138-4079, 3120011384079, 5330-01-589-9708, 5330015899708, 6680-01-511-4788, 6680015114788
NIIN
011384079, 015899708, 015114788
Founded in 1967 by Mr. Joseph Sweeney and Mr. Henry Spoldi, Pico Electronics was established to improve and reduce the size of transformers and converters - which at the time were quite large. They began developing miniature and ultra-miniature units of high quality and reliability for military specifications and commercial air flight applications. With the new technologies that allow for surface mounting and other installation venues, Pico Electronics has come to be known as "the" resource for 'anything that flies' using a miniature conductor or transformer. Additionally, Pico Electronics became the experts in miniature DC to DC power converters and miniature AC to DC power supplies. Over the years Pico established itself as a leader in high voltage DC to DC output (the high voltage outputs that meet today's modern requirements of up to 10,000 volts DC). Today, Pico Electronics is constantly improving the efficiency of the power source and power factor correction, and is extending their high voltage product line. Pico offers ultra-miniature packages and high power units (up to 300 watts) as well as regulated, programmable, and dual output packages. They are able to accommodate many different input voltages in both the DC range, anywhere from 5 volts DC to 380 volts DC, and in the AC to DC range, having universal AC input. The never-ending drive to push the high voltage envelope - and the reduction of the size and weight from rack type systems into brick and half brick modules - is why Pico Electronics' DC to DC converters, transformers and inductors can be found everywhere - from the single engine aircraft to the international space station to Sojourner (the mobile module that landed on Mars).
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148W-7-F
Multicomp Pro
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
EU2B-YS3203C
Idec
ROTARY SWITCH;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Gec Plessey Semiconductors
FS20-120-C2
Triad Magnetics
Triad Magnetics' FS20-120-C2 is a 2.5 VA power transformer with dual 115V primary rating, providing 10V output voltage and 0.12A output current for two windings. With an isolation voltage of 4200000V, this split bobbin transformer is ideal for applications requiring compact dimensions (L34.92xB28.57xH23.8 mm) and through-hole mounting features.
ZA9368-AED
Coilcraft
ZA9368-AED by Coilcraft is a power transformer with 3500V isolation voltage, 256uH inductance, and 5V output voltage. Ideal for isolation applications with AEC-Q200 approval, it operates b/w -40 to 125°C and has a center tap feature for single 3.3V rating.
10-12
Bel Fuse
Bel Fuse 10-12 is a power transformer with dimensions of L95.3XB82.6XH79.4 (mm). It has a center tap feature on both secondaries and an isolation voltage of 1500 V. With an output current of 12 A and output voltage of 5 V, it is suitable for chassis mount applications requiring reliable power supply.
VCM5,0/2/12
Block Transformatoren-elektronik
VCM5,0/2/12 by Block Transformatoren-elektronik is a 5 VA power transformer with dual 12V outputs. It has approvals from CSA, CUL, EAC, UL, and VDE. Ideal for applications requiring a single 230V primary input and through-hole mounting at a max operating temperature of 50°C.
2088
Amecon
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2088; No. of Winding (Secondary): 1; Output Current-1: 1.04 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 25 VA;
Signal Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; No. of Winding (Secondary): 2; Center Tap Feature-2: YES; Height: 79.4 mm;
74942301
Wuerth Elektronik & Kg
Wurth Elektronik's 74942301 power transformer has an isolation voltage of 4300V, AEC-Q200 approval, and operates b/w -40 to 125°C. With a nominal input voltage of 1000V, it is ideal for surface mount applications in various electronic devices.
80-25
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 80; Output Current-2: 25 A; Output Voltage-2: 40 V; Nominal Operating Frequency: 50/60 HZ;
10-8
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; Nominal Operating Frequency: 50/60 HZ; Output Voltage-2: 5 V; Length: 85.7 mm;
10-25
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; Length: 114.3 mm; Output Voltage-1: 5 V; Center Tap Feature-2: YES;
DA2304-ALD
Coilcraft's DA2304-ALD is a 7.2W power transformer with 2500V isolation voltage, suitable for AEC-Q200 applications. It features dual 3.3V primary rating, 17.8uH inductance, and operates at frequencies up to 150KHz. Ideal for power systems requiring compact dimensions and high reliability in harsh environments.
4782-01
Api Technologies
Api Technologies' 4782-01 Power Transformer has a 450 VA rating with output voltage of 5V and current of 10A. Ideal for chassis mounting applications, it operates at a frequency of 60Hz and is designed for single-phase systems with a primary rating of 115V.
722A
Hammond Manufacturing
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): CSA; Nominal Input Voltage (V): 117/234; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 720 VA;
F-219X
Magnetek
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; No. of Winding (Primary): 1; Application: POWER; Maximum Input Voltage (V): 115;
F-22A
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): UL; Maximum Input Voltage (V): 115; Center Tap Feature-2: NO; Center Tap Feature-1: YES;
164E28
The Hammond Manufacturing 164E28 is a Split Bobbin Power Transformer with 2.4 VA rating, 14V output voltage, and 2500V isolation voltage. Ideal for PCB mounting applications, it operates at a nominal input voltage of 115V and has CUL/UL approvals for safety compliance.
1182L110
1182L110 by Hammond Manufacturing is a Toroidal Power Transformer with 225 VA rating, dual 117/234V primary, and 110V output voltage. It has CE, CSA, IEC, UL approvals and provides isolation voltage of 4000V. Ideal for chassis mounting applications requiring reliable power conversion at 50/60Hz frequency.
5952
POWER TRANSFORMER; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 250 VA; Output Current-1: 5.21 A; Nominal Operating Frequency: 60 HZ;
CTX110607-R
Cooper Industries
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: CTX110607-R; Maximum Operating Frequency: 80 KHz; Minimum Operating Temperature: 0 Cel; Length: 21 mm;
2292
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2292; Volt-Ampere Rating (VA): 600 VA; Output Current-1: 12.5 A; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Pico Electronics
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved