Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Phoenix Contact 3031241 is a MODULAR TERMINAL BLOCK for C RAIL mounting. It supports wire gauge up to 12 AWG with 4 mm2 wire cross section and rated voltage of 800 V. With a current rating of 31 A, it offers a secure SPRING LOADED fastening method for electrical connections in industrial applications.
Median Price
$2.130
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.710
100+ parts
$0.680
1k+ parts
-
10k+ parts
Farnell
$1.110
$1.070
$1.020
DigiKey
$1.890
Sager
Mouser Electronics
$2.280
Arrow
$2.343
$1.895
$1.611
Airline Hydraulics
$2.400
RS Americas
$2.420
$1.910
$1.690
Distrelec
$2.508
Element14
$2.740
$2.640
$2.530
Newark
$4.570
$3.870
$3.230
Master Electronics
TTI
$1.980
Verical
$2.414
Conrad
$1.715
TTI Europe
$1.147
$1.083
NEP Electronics
Omnical
$1.380
TME
$2.150
$1.350
Component Electronics Inc.
$2.310
$1.730
$1.500
Quotebeam
Shortec Electronics
Electronic Supply
IBS Electronics
$2.665
Dynamic Solutions
LIBRA Elektronik GmbH
Electro Sonic
$1.950
$1.660
$1.630
VNN
TodayComponents
$1.320
Powertech Controls
Nova Conductors
PC Components Company LLC
Bristol Electronics
Ampacity Inc.
$0.970
Authorized Procurement Solutions
Perfect Parts
Continental Prestige Electronics
Argo Parts USA
Aranea Global
C RAIL mounting type allows for easy and secure installation in industrial settings.
Supports a wide range of wire sizes, providing flexibility for different wiring requirements.
Suitable for high voltage applications, ensuring safe and reliable electrical connections.
Modular design allows for customization and easy expansion of the terminal block system.
Optimal wire cross section for efficient electrical conductivity and compatibility with various wire sizes.
Spring loaded fastening method ensures secure connection and easy installation/removal of wires.
High rated current capacity allows for handling of large electrical loads without overheating or damage.
Multiple ways for terminal connection provide flexibility and options for different wiring configurations.
Terminals & Terminal Blocks 3031241 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Phoenix Contact
Product Type:
Additional Features:
Rated Voltage:
Rated Current:
Wire Gauge:
Wire Cross Section:
Total Ways:
Total Decks:
Total Rows:
Mounting Style:
Fastening Style:
3031241 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
NSN
3120-98-107-3132, 3120981073132
NIIN
981073132
PCN Design/Specification - design change 1/15/2024
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
EU2B-YS3303C
Idec
ROTARY SWITCH;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
12129493
Delphi Connection Systems
PUSH-ON TERMINAL; Wire Cross Section: 3 mm2; Manufacturer Series: 12; Terminal Gender: FEMALE;
MS-25036-157
Molex
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 6 mm2;
2091-1102/002-000
Wago
BARRIER STRIP TERMINAL BLOCK;
1755752
Phoenix Contact
The Phoenix Contact 1755752 is a STRIP TERMINAL BLOCK with 4 ways and a rated voltage of 320V. It has a fastening method of CONNECTOR and can handle a current of up to 12A. This terminal block is suitable for BOARD mounting and has safety approvals from CB, CSA, CUL, EAC, EN, UL, and VDE.
2-320563-3
TE Connectivity
TE Connectivity 2-320563-3 is a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Featuring female terminal gender, it suits applications requiring secure electrical connections in various industries.
1-320551-4
TE Connectivity 1-320551-4 is a UL-approved FEMALE RING TERMINAL for 18 AWG wire with a rated voltage of 300V. Ideal for 0.96 mm2 wire cross sections, it ensures secure electrical connections in various applications.
51863-1
Tyco Electronics Amp
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Safety Approval: UL; No. of Ways: 1;
5-796634-2
TE Connectivity 5-796634-2 is a STRIP TERMINAL BLOCK with 2 ways, UL approved for 12 AWG wire. Mount on CABLE using SCREW fastening. Ideal for industrial and electrical applications.
302
Marathon Special Products
302 by Marathon Special Products is a UL-approved BARRIER STRIP TERMINAL BLOCK with 2 rows, rated for 30A current and 600V voltage. It features PANEL mounting and SCREW fastening, suitable for applications requiring secure electrical connections with 10 AWG wire gauge.
35684
RING TERMINAL; Wire Gauge: 12 AWG; Safety Approval: UL; Terminal Gender: FEMALE; Wire Cross Section: 4.17 mm2; No. of Ways: 1;
1952322
The Phoenix Contact 1952322 is a UL-approved barrier strip terminal block with 8 ways and a rated current of 8A. It has a mounting type of CABLE and can accommodate wire gauge up to 16 AWG, making it suitable for various electrical applications.
2-34173-1
RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 600 V; No. of Ways: 1; Wire Cross Section: 6 mm2; Safety Approval: UL;
39357-0002
Molex 39357-0002 is a UL-approved barrier strip terminal block with 16 AWG wire gauge, rated for 300V and 12A current. It has a mounting type of BOARD and uses screws for fastening. Ideal for applications requiring secure electrical connections in limited space.
MSTBVA2,5/4-G-5,08
Phoenix Contact's MSTBVA2,5/4-G-5,08 is a 4-way strip terminal block with a rated voltage of 320V and current of 12A. It is approved by CB, CSA, CUL, EAC, EN, UL, VDE for safety. Ideal for board mounting applications using connector fastening method.
MCV1,5/2-G-3,5
Phoenix Contact's MCV1,5/2-G-3,5 is a 4-way barrier strip terminal block with 1.5mm2 wire cross section and 15 AWG wire gauge. Rated for 8A current and 160V voltage, it is ideal for board mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.
1SNK505060R0000
Abb
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; Wire Cross Section: 4 mm2;
320553
TE Connectivity 320553 is a UL-approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.42 mm2, it's ideal for female terminals in various electrical applications.
35665
RING TERMINAL; Wire Gauge: 8 AWG; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 10.5 mm2; Terminal Gender: FEMALE;
DRA1-CMXE100D10
Crydom
The Crydom DRA1-CMXE100D10 is a modular terminal block with 4 ways and a rated voltage of 100V. It is mounted on DIN rail and has a fastening method using screws. With a safety approval from CE and UL, it is suitable for various applications in the field of terminals and terminal blocks.
282834-6
MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; No. of Decks: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3031238
MODULAR TERMINAL BLOCK; Mounting Type: C RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 12 AWG; No. of Rows: 1;
3031306
Phoenix Contact 3031306 is a Modular Terminal Block with C RAIL mounting. Rated for 800V voltage, it supports 12 AWG wire gauge and 4mm2 wire cross section. UL approved for safety, it handles up to 30A current across 4 ways. Ideal for industrial applications requiring secure and efficient electrical connections.
3031212
MODULAR TERMINAL BLOCK; Mounting Type: C RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 12 AWG; Voltage (Rated): 800 V;
3031953
MODULAR TERMINAL BLOCK;
3031393
Phoenix Contact 3031393 is a MODULAR TERMINAL BLOCK with C RAIL mounting. It supports wire gauge up to 10 AWG and voltage rating of 800V, ideal for applications requiring fastening with SPRING LOADED method. With a rated current of 41A and 6mm2 wire cross section, it offers reliable connectivity in various electrical setups.
3031089
MODULAR TERMINAL BLOCK; Mounting Type: C RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 16 AWG; Voltage (Rated): 500 V;
3031364
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SPRING CAGE; Additional Features: STANDARD; DNV; EAC; IECEE; IEC; KR; LR; NEPSI; RS; UL; UKCA; VDE, POLYAMIDE; Wire Gauge: 10 AWG; Voltage (Rated): 800 V;
3031445
Phoenix Contact 3031445 is a modular terminal block for C RAIL mounting. Rated at 800V voltage and 40A current, it accommodates wire gauge up to 10 AWG with 6mm2 cross section. Ideal for industrial applications requiring secure connections in limited space.
3031131
3031322
MODULAR TERMINAL BLOCK; Mounting Type: C RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 12 AWG; No. of Decks: 1;
3031539
MODULAR TERMINAL BLOCK; Mounting Type: C RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 12 AWG; Voltage (Rated): 500 V;
3031128
3031047
BARRIER STRIP TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SPRING CAGE; Additional Features: STANDARD: UL 94V-0, POLYAMIDE; Wire Gauge: 13 AWG; Voltage (Rated): 500 V;
3031225
3031377
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SPRING LOADED; Additional Features: STANDARD: UL 94V-0, PA; SAFETY APPROVAL: EAC; EACEX; IECEX; KR; LR; NK; PRS; UL; VDE; Wire Gauge: 10 AWG; Voltage (Rated): 800 V;
3031461
MODULAR TERMINAL BLOCK; Mounting Type: C RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 10 AWG; No. of Rows: 1;
3031487
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SPRING LOADED; Additional Features: STANDARD: UL 94V-0, PA; SAFETY APPROVAL: EAC; EACEX; IECEX; KR; LR; NK; PRS; UL; VDE; Wire Gauge: 8 AWG; Voltage (Rated): 1000 V;
3031490
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Fastening Method: SPRING LOADED; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 800 V;
3031144
MODULAR TERMINAL BLOCK; Manufacturer Series: 3031144;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved