Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Approvals (V): GOST; UL; IEC Conformity: NO; Assembly Item Name: COVER ITEM; DIN Conformity: NO; MIL Conformity: NO;
Median Price
$0.890
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Conrad
1+ parts
$0.594
100+ parts
-
1k+ parts
10k+ parts
DigiKey
Mouser Electronics
Arrow
Sager
RS Americas
$1.090
$0.860
$0.820
Airline Hydraulics
$1.130
Newark
$1.930
$1.620
$1.370
TTI
RS (Exports)
Master Electronics
$0.940
Verical
$1.281
$1.190
Farnell
$0.492
$0.472
$0.462
Element14
$0.983
$0.850
TTI Europe
$0.524
$0.484
$0.474
Omnical
$0.500
TodayComponents
$0.740
$0.520
Nova Conductors
Carlton-Bates
$1.120
Quotebeam
VNN
Shortec Electronics
Dynamic Solutions
Electro Sonic
$1.009
$0.781
$0.765
IBS Electronics
$1.196
$1.157
Vyrian
Powertech Controls
LIBRA Elektronik GmbH
Proax Technologies Ltd
Ampacity Inc.
$0.418
Argo Parts USA
$0.807
Continental Prestige Electronics
$0.791
Aranea Global
$0.833
$0.800
Perfect Parts
Assembly Products 3030488 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Approvals (V):
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
PCN Design/Specification - 303yyyy Mechanical 24/Jun/2014
PCN Packaging - Mult Devs - packaging color chg 08/JUL/2021
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shandong Yiguang Electronic Joint Stock
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Taitron Components
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
206966-9
TE Connectivity
TE Connectivity 206966-9 is an Assembly Product with 13 shell sizes. It supports up to 0 AWG wire size and features a STRAIGHT mounting style. Made of POLYETHYLENE, it offers SCREW mounting options and is ideal for applications requiring 3/4-20 UNEF-2B compatibility.
17E-1657-09
The Amphenol 17E-1657-09 is a D-SUB CONNECTOR BACKSHELL made of ZINC ALLOY. It has a min cable entry of 0.21" and max cable entry of 0.32". Mounting options include SCREW (#4-40). Ideal for secure cable connections in various electronic assemblies.
MHDTZK-9-K
Norcomp Interconnect Devices
MHDTZK-9-K by Norcomp is a BACKSHELL KIT with insulator material ABS and zinc alloy construction. It has UL approval, operating from -40°C to 120°C. Ideal for applications requiring secure mounting with 4-40 screws in assembly products.
1-66103-8
TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.
0460-204-08141
TE Connectivity's 0460-204-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55°C to 125°C, suitable for wire sizes ranging from 10 AWG to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable male contacts.
10141272-313ALF
AMPHENOL ICC
The Amphenol Icc 10141272-313ALF contact assembly product features a crimp terminal type, rated for 4A current at 48V DC/AC. With a contact resistance of 30 mΩ, it is suitable for applications requiring a max wire size of 24 AWG and operating temperatures ranging from -40°C to 130°C.
030-1952-000
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Rated Current: 5 A; Rated AC Voltage: 1000 V; Mounting Style: STRAIGHT; Maximum Operating Temperature: 125 Cel; Design: SIGNAL;
F22891-000
CONNECTOR ACCESSORY;
13697408
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .0748 inch; Minimum Cable Entry: .0551 inch;
DF22A-1416SCFA
Hirose Electric
2200156
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
77138-101LF
Amphenol Communications Solutions
Amphenol's 77138-101LF CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and BELLOWED CONTACT style. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 30 AWG to 26 AWG.
AT60-204-12141
1053438
5213
Keystone Electronics
M23053/5-111-9
3m Electronic Products Division
ASSEMBLY ITEMS; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; IEC Conformity: NO;
WM-4S
TE Connectivity's WM-4S is a POWER AND SIGNAL WEDGE ITEM for DTM SERIES assemblies. It supports wire sizes up to 0 AWG, with a temp range of -55 to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
DF11-2428SCFA(04)
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3030161
TERMINAL BLOCK ACCESSORY; Assembly Item Name: PLUG-IN BRIDGE; Material: COPPER; Approvals (V): EAC; UL; IEC Conformity: NO; DIN Conformity: NO;
3030323
TERMINAL BLOCK ACCESSORY; Rated Current: 41 A; DIN Conformity: NO; Assembly Item Name: BLOCK; MIL Conformity: NO; IEC Conformity: NO;
3030174
TERMINAL BLOCK ACCESSORY; Rated Current: 24 A; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE; IEC Conformity: NO;
3030336
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER ITEM; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
3030527
3030213
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER; Material: COPPER; Approvals (V): UL; MIL Conformity: NO; IEC Conformity: NO;
3030514
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END COVER; DIN Conformity: NO;
3030417
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END COVER; IEC Conformity: NO; MIL Conformity: NO;
3030190
TERMINAL BLOCK ACCESSORY; Rated Current: 24 A; DIN Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE; IEC Conformity: NO; MIL Conformity: NO;
3030815
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: PARTITION PLATE; MIL Conformity: NO; IEC Conformity: NO;
3030420
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Approvals (V): GOST; UL; Assembly Item Name: END COVER; MIL Conformity: NO;
3030721
TERMINAL BLOCK ACCESSORY; Approvals (V): UL; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: PLATE ITEM; MIL Conformity: NO;
3030242
TERMINAL BLOCK ACCESSORY; Material: COPPER; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: JUMPER;
3030271
TERMINAL BLOCK ACCESSORY; Rated Current: 32 A; DIN Conformity: NO; IEC Conformity: NO; Manufacturer Series: 3030271; Assembly Item Name: PLUG-IN BRIDGE;
3030307
TERMINAL BLOCK ACCESSORY; Rated Current: 41 A; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE;
3030349
TERMINAL BLOCK ACCESSORY; Usage: MODULAR TERMINAL BLOCKS; Assembly Item Name: JUMPER ITEM; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
3030491
3030226
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: JUMPER ITEM; MIL Conformity: NO; IEC Conformity: NO;
3030255
TERMINAL BLOCK ACCESSORY; Rated Current: 32 A; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: PLUG-IN BRIDGE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved