Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY; Connector Side-1: 40-POS. SOCKET; Connector Side-2: 2X8 CHANNELS; Rated Voltage: 30 V; Rated Current: .5 A; Shielding: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Dynamic Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$0.253
$0.243
Northwest PG Solutions
$0.278
$0.245
AZTECH Wire
$3.810
$3.660
$3.590
$3.510
Electrical Wires & Cables 2321350 attributes and parameters. Explore more Electrical Wires & Cables devices from Phoenix Contact
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
Diameter:
IEC Conformity:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
2321350 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
Formosa Microsemi
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Taiwan Semiconductor
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
44A0111-26-0-US
TE Connectivity's 44A0111-26-0-US is a 600V rated wire with TIN finish, suitable for -65 to 150°C. Featuring 26 AWG copper alloy conductor, it is ideal for flexible cord and fixture wire applications.
80891
Helukabel
Helukabel 80891 is a communication cable with 36 conductors, approved by DIN and VDE. It has a diameter of 13.5mm, operating from -20°C to 60°C. Ideal for indoor cabling, patching, and crossing applications.
1700/14100
3m Electronic Products Division
1700/14100 by 3M Electronic Products Division is a UL and CUL approved stranded flat cable with 14 copper alloy conductors. Featuring a tin finish, PVC insulation, and rated for up to 300V, it's ideal for electrical wiring applications requiring flexibility and durability in temperatures ranging from -20°C to 105°C.
U.FL-2LP-088K1T-A-(300)
Hirose Electric
U.FL-2LP-088K1T-A-(300) by Hirose Electric is a stranded communication cable with FEP jacket and silver conductor finish. It operates b/w -40 to 90°C, suitable for electronic and wireless applications. Featuring 30 AWG wire gauge, it has a diameter of 1.37mm and stranding of 7X0.102 for reliable connectivity.
P512-006
Tripp Lite
CABLE ASSEMBLY;
9451001U1000
Belden
Belden 9451001U1000 is a CSA, NEC, and UL approved communication cable with stranded construction and PVC jacket. Featuring copper alloy conductors, it has a rated voltage of 300V and can operate b/w -20 to 75°C. Ideal for various electrical applications requiring reliable data transmission over short distances.
3075BK005
Alpha Wire
Alpha Wire's 3075BK005 is a CE, CSA, and UL approved electrical wire with stranded construction. Featuring a rated voltage of 600V, it has a conductor made of tin-coated copper alloy. This flexible cord and fixture wire operates b/w -40°C to 105°C, making it ideal for various electrical applications.
4160500
Lapp Group Pvt
4160500 by Lapp Group Pvt is a 600V stranded wire with PVC insulation. It has CE, CSA, HAR, UL approvals and operates b/w -40 to 105°C. With tinned copper conductor and 2.5mm² cross-section area, it's ideal for cabling applications requiring flexibility and durability.
3365/40
The 3m Electronic Products Division 3365/40 is a UL-approved FLAT FLEXIBLE CABLE with TINNED COPPER conductors. Featuring 7X36 stranding and rated for 300V, it has a temperature range of -20 to 105 °C, making it ideal for electrical wiring applications. With a length of 50.8mm and AWG of 28, this cable is suitable for various electronic projects.
87610601000
Belden 87610601000 is a UL-approved flexible cord with 2 conductors, tinned copper construction, and PVC jacket. It has a rated voltage of 300V, suitable for applications requiring a temperature range of -20 to 60°C. With a wire gauge of 22 AWG and stranding of 7x30, it is ideal for electrical wiring in various settings.
830030101000
Belden 830030101000 is a UL-approved flexible cord and fixture wire with stranded silver-coated copper conductor (24 AWG, 1.1176 mm diameter, 19X36 stranding) insulated with TFE material. Ideal for electrical wiring applications requiring flexibility and durability.
U050-006
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: MICRO USB B MALE; Shielding: NO; IEC Conformity: NO; DIN Conformity: NO;
M22759/32-16-9
TE Connectivity's M22759/32-16-9 wire is MIL-approved with stranded construction, rated at 600V. Featuring a tin finish, ETFE insulator, and copper alloy conductor, it operates b/w -65 to 150°C. Ideal for military applications requiring flexibility and fixture wiring in harsh environments.
44A0111-28-96
TE Connectivity's 44A0111-28-96 is a flexible cord and fixture wire with 600V rated voltage, TIN conductor finish, and PVDF insulator. Ideal for applications requiring a temperature range of -65 to 150°C, this wire features copper alloy conductors in 28 AWG size.
3365/14-300SF
3m Electronic Products Division's 3365/14-300SF is a FLAT FLEXIBLE CABLE with 7 conductors, rated at 300V. Featuring STRANDED construction and TIN finish, it is UL and CUL approved. Ideal for electrical applications requiring flexibility in confined spaces.
RF179-74SP3-72RP2-0400
Samtec
Samtec RF179-74SP3-72RP2-0400 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, SILVER finish, and POLYTETRAFLUOROETHYLENE insulator. Operating from -50 to 165 °C, it has BNC and MCX plugs for various applications requiring shielding and copper alloy conductors.
923345-01-C
3m Electronic Products Division's 923345-01-C is a SOLID wire with AWG 22 gauge, 0.326 mm2 cross section area, and tinned copper conductor. Ideal for flexible cord and fixture wire applications due to its 1X22 stranding and 0.003 mm length.
44A0111-16-9-L183
WIRE AND CABLE;
115101-22-36.00
Amphenol
35108BK199
Alpha Wire 35108BK199 is a stranded wire with polyethylene jacket, shielding, and tin finish. Rated for 300V, it has PVC insulation and operates b/w -30 to 80°C. Ideal for flexible cords and fixtures due to its copper alloy conductor, 0.326 mm2 area, and 7X30 stranding.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2321541
Phoenix Contact
2321868
2321224
CABLE ASSEMBLY; Connector Side-1: FUJITSU CONN.; Connector Side-2: IDC/FLK SOCKET; Rated Voltage: 60 V; Rated Current: 1 A; Shielding: NO;
2321062
2321130
2321208
2321114
2321237
2321020
2321143
2321075
2321156
2321185
2321091
2321211
2321059
2321169
2321127
2321017
2321046
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved