Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Phoenix Contact 2302049 is a stranded communication cable with approvals from CUL, EAC, and UL. Featuring semi-rigid PVC jacket, it has 9 conductors made of copper with 0.25 mm2 cross-section area. With D-SUB socket and pin strip connectors, this cable is ideal for applications requiring shielding at rated voltage of 60V and operating temperatures from -40 to 70°C.
Median Price
$69.830
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Dynamic Solutions
Nova Conductors
VNN
Shortec Electronics
Ampacity Inc.
$59.360
Neutron USA
$139.990
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Having approvals from reputable organizations like CUL, EAC, and UL ensures that the product meets high safety and quality standards.
Stranded construction provides flexibility and durability, making the cable less prone to breakage or damage.
The use of semi-rigid PVC jacket material offers good protection against abrasion, chemicals, and moisture, increasing the lifespan of the cable.
Shielding helps to reduce electromagnetic interference, ensuring reliable signal transmission in communication applications.
The high maximum operating temperature allows the cable to be used in a wide range of environments without risking damage.
The 24 AWG wire gauge strikes a good balance between signal carrying capacity and flexibility.
The 2A rated current makes this cable suitable for low to moderate power applications without risking overheating.
Having 9 conductors allows for more complex communication setups or connections, offering versatility in usage.
Electrical Wires & Cables 2302049 attributes and parameters. Explore more Electrical Wires & Cables devices from Phoenix Contact
Approvals (V):
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
Diameter:
IEC Conformity:
Jacket Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
2302049 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Hitano Enterprise
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
SPC TECHNOLOGY/ MULTICOMP
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
3365/50
3m Electronic Products Division
The 3m Electronic Products Division's 3365/50 is a UL-approved FLAT FLEXIBLE CABLE with 50 conductors of TINNED COPPER. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20 to 105 °C. Ideal for applications requiring flexibility and multiple connections in limited spaces.
1110145001
Molex
CABLE ASSEMBLY;
5477
Consolidated Electronic Wire & Cable
5477 by Consolidated Electronic Wire & Cable is a 300V stranded wire with PVC jacket, tin finish, and copper alloy conductor. With approvals from CM, CSA, UL, it's ideal for flexible cord and fixture applications due to its 25 conductors, 18 AWG gauge, and max operating temperature of 80°C.
982670387
CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 22;
36212
Lindy International
The Lindy International 36212 cable features UL approval, PVC jacket, and copper conductor. With DVI-D male to female connectors, it is ideal for electrical connections requiring shielding. Operating temperatures range from -20°C to 80°C with a wire gauge of 28 AWG and diameter of 8.6 mm.
107-1
Standard Wire & Cable
Standard Wire & Cable's 107-1 is a MIL-approved stranded wire with nylon jacket, rated at 600V. Featuring tin-finished copper conductor, PVC insulator, and operating temp of 105°C. Ideal for applications requiring flexible cord and fixture wire in various industries.
115101-22-36.00
Amphenol
USB2422
Pic Wire & Cable
Pic Wire & Cable's USB2422 is a 24 AWG stranded copper cable with ETFE jacket, silver finish, and shielding. Ideal for USB 2.0 high-speed applications, it operates b/w -55°C to 150°C. With extruded FEP insulator, this communication cable has 4 conductors in a diameter of 4.57mm.
U.FL-2LP-088K1T-A-(100)
Hirose Electric
U.FL-2LP-088K1T-A-(100) by Hirose Electric is a stranded electrical wire with a fluorinated ethylene propylene jacket and shielding. It has a rated voltage of 60V and is commonly used in wireless transmission devices and electronic measuring devices.
M22759/32-22-0
TE Connectivity
TE Connectivity's M22759/32-22-0 wire is MIL-approved with a 600V rating, suitable for temperatures ranging from -65 to 150°C. Constructed with stranded copper alloy conductor finished in tin, it features a cross-section area of 0.325 mm2 and is ideal for applications requiring flexible cord and fixture wiring under MIL-DTL-22759 standards.
55A0111-14-9
TE Connectivity 55A0111-14-9 is a 600V stranded wire with tin finish, radiation-crosslinked modified ETFE insulator. It operates b/w -65 to 150°C, has 14 AWG gauge, and copper alloy conductor. Ideal for flexible cord and fixture wire applications.
151661009
Molex 151661009 is a UL-approved flat cable with a rated voltage of 60V. It features a tin-finished copper alloy conductor and polyester insulator, suitable for applications requiring a max operating temperature of 105°C and min operating temperature of -40°C. With 31 conductors and a wire gauge of AWG37, it has a cross-sectional area of 0.01 mm2 and resistance of 2.2 ohm, making it ideal for electrical wiring needs.
1655WH005
Alpha Wire
WIRE AND CABLE;
44A0111-16-94
TE Connectivity's 44A0111-16-94 is a 600V rated electrical wire with TIN finish, ideal for applications requiring flexibility. Featuring 16 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. With a diameter of 1.83mm and stranding of 19X29, it is suitable for FLEXIBLE CORD AND FIXTURE WIRE installations.
687840003
CABLE ASSEMBLY; Connector Side-1: USB A PLUG; Connector Side-2: MICRO USB B PLUG; Wire Gauge (AWG): 28;
9L28026008H100
Belden
TTL-232R-RPI
FTDI
TTL-232R-RPI by FTDI is a 1mm communication cable with USB to UART connectors, rated for 5.25V and 0.015A. Ideal for Raspberry Pi applications, it operates b/w -40°C to 85°C, approved by CE and FCC.
M27500-22ML1T08
TE Connectivity's M27500-22ML1T08 is a MIL-DTL-27500 cable with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65°C to 150°C, suitable for flexible cord and fixture wire applications.
2273107-4
TE Connectivity's 2273107-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, suitable for straight mounting with M12 screw option. Ideal for electrical wiring applications requiring reliable performance in various environments.
M17/94-RG179
Glenair
Glenair's M17/94-RG179 is a solid construction cable with FEP jacket, shielding, and silver conductor finish. It operates at temperatures from -55°C to 200°C, rated for 900V. This communication cable uses extruded PTFE insulator material and copper conductor for applications requiring high resistance (0.802 ohm) in a compact 2.54mm diameter wire (AWG 38).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2302159
Phoenix Contact
CABLE ASSEMBLY; Connector Side-1: D-SUB SOCKET; Connector Side-2: D-SUB PIN STRIP; Rated Voltage: 60 V; Rated Current: 2 A; Shielding: YES;
2302133
23026-010
Hitachi
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Insulator Material: PVC; Conductor Material: TINNED COPPER; IEC Conformity: NO;
2302405
CABLE ASSEMBLY; Connector Side-1: IDC/FLK SOCKET; Connector Side-2: IDC/FLK SOCKET; Rated Voltage: 60 V; Rated Current: 1 A; Shielding: NO;
2302544
CABLE ASSEMBLY; Connector Side-1: D-SUB SOCKET; Connector Side-2: IDC/FLK SOCKET; Rated Voltage: 60 V; Rated Current: 1 A; Shielding: NO;
2302609
2302612
2302078
2302162
2302434
CABLE ASSEMBLY; Connector Side-1: D-SUB MALE; Connector Side-2: D-SUB MALE; Rated Voltage: 60 V; Rated Current: 2 A; Shielding: YES;
2302531
2302395
2302476
2302269
2302492
2302421
2302515
2302340
CABLE ASSEMBLY; Connector Side-1: D-SUB MALE; Connector Side-2: D-SUB FEMALE; Rated Voltage: 60 V; Rated Current: 2 A; Shielding: YES;
2302528
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved