Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Phoenix Contact 2288998 is a stranded wire with semi-rigid PVC jacket, rated for 60V. Featuring tin finish copper conductor, it has a cross-section area of 0.14 mm2 and resistance of 0.145 ohm. Ideal for flexible cord and fixture wire applications with IDC/FLK socket connectors on both ends.
Median Price
$115.032
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$94.430
100+ parts
-
1k+ parts
10k+ parts
Verical
RS (Exports)
$115.190
$102.520
TME
$75.210
Nova Conductors
$94.440
Quotebeam
$273.870
Vyrian
VNN
Dynamic Solutions
Shortec Electronics
AZTECH Wire
$10.858
Ampacity Inc.
$80.270
Continental Prestige Electronics
$92.551
Neutron USA
$204.990
Argo Parts USA
Netroflash
$89.718
$87.829
Perfect Parts
Having CUL and UL approval ensures that the product meets the safety standards set by these organizations, providing peace of mind to users.
The use of stranded construction allows for flexibility and durability, making the wire less prone to breaking or cracking compared to solid core wires.
The semi-rigid PVC jacket provides good protection against wear and tear, moisture, and abrasion, enhancing the longevity of the wire.
The 60V rating makes this wire suitable for low voltage applications, ensuring safe and reliable operation in various electrical setups.
Copper is known for its high conductivity, making this wire efficient in transmitting electrical signals or power with minimal loss.
With a maximum operating temperature of 70°C, this wire can withstand high temperatures, reducing the risk of overheating and potential damage.
The wire's ability to operate in temperatures as low as -40°C makes it suitable for use in cold environments without compromising performance.
With a rated current of 1A, this wire can safely carry electrical currents up to this limit, ensuring reliable performance under specified conditions.
Electrical Wires & Cables 2288998 attributes and parameters. Explore more Electrical Wires & Cables devices from Phoenix Contact
Approvals (V):
Conductor Finish:
Conductor Material:
Connector Side-1:
Connector Side-2:
Connector Accessory Type:
Construction:
Cross Section Area:
DIN Conformity:
Diameter:
IEC Conformity:
Jacket Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire Gauge (AWG):
Wire & Cable Name:
2288998 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Sangdest Microelectronics (Nanjing)
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Semtech
296
Alpha Wire
The Alpha Wire 296 is a solid construction electrical wire with tin finish, suitable for flexible cord and fixture applications. Featuring a copper alloy conductor with 1X18 stranding, it has a diameter of 1.016mm and can operate b/w temperatures of 0 to 200°C. With a resistance of 0.022 ohm and cross-sectional area of 0.823 mm2, this wire is ideal for various electrical projects.
111005-1030
Molex
CABLE ASSEMBLY;
12916
Helukabel
Helukabel 12916 is a CE, CSA, and UL approved CONTROL CABLE with STRANDED construction and PVC jacket. Ideal for PLANT ENGINEERING and MACHINERY MANUFACTURING applications. Features include 300V rating, -40 to 80°C operating temp range, and 0.75mm² cross-section area.
FFSD-05-D-02.50-01-N
Samtec
Samtec's FFSD-05-D-02.50-01-N is a UL approved flat cable with 10 conductors, TIN finish, and PVC insulation. Featuring 30 AWG wire gauge, it has a cross section area of 0.051 mm2 and can handle up to 2.3A current. Ideal for applications requiring a temperature range from -40°C to 105°C.
44A0111-16-9-MX
TE Connectivity
TE Connectivity's 44A0111-16-9-MX is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 16 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. With a diameter of 1.83mm and stranding of 19X29, it is suitable for FLEXIBLE CORD AND FIXTURE WIRE installations.
115101-19-600
Amphenol
282839-000
TE Connectivity's 282839-000 is a flexible cord and fixture wire with a rated voltage of 600V. It features a tin conductor finish, copper alloy conductor material, and can operate in temperatures ranging from -65°C to 150°C. This wire is commonly used in electrical applications requiring a max wire size of 24 AWG.
U.FL-2LP-088K1T-A-(150)
Hirose Electric
Hirose Electric U.FL-2LP-088K1T-A-(150) is a stranded FEP cable with silver finish, shielding, and 30 AWG. Ideal for communication applications, it has a diameter of 1.37mm, operates b/w -40 to 90°C, and features U.FL connectors on both ends.
UMC-201
Infinite Electronics International
FFSD-05-D-05.73-01-N
Samtec's FFSD-05-D-05.73-01-N is a UL-approved stranded cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it operates b/w -40°C to 105°C with a rated current of 2.3A. Featuring 10 conductors in a flat cable design, it offers a cross-section area of 0.0509 mm² and uses socket connectors on both ends.
16066
Helukabel 16066 is a flexible cord with 28 stranded bare copper conductors, PVC jacket, and shielding. Rated for 300V, it has CE, DIN, VDE approvals and operates b/w -40 to 80°C. Suitable for measuring and control circuits due to its 1mm2 cross-section area and AWG18 wire gauge.
3365/14
3m Electronic Products Division
3365/14 by 3m Electronic Products Division is a UL approved stranded electrical wire with a rated voltage of 300V. It features tinned copper conductors, polyvinyl chloride insulation, and can operate in temperatures ranging from -20 to 105 °C. This flat flexible cable with 14 conductors is suitable for various wire and cable applications.
UC-20AMM-QA8A01
Amphenol UC-20AMM-QA8A01 cable features UL approval, PVC jacket, and shielding. With USB C to USB A connectors, 24 AWG wire gauge, and 4 conductors, it's ideal for data transfer in various electrical applications.
282785-000
TE Connectivity's 282785-000 is a flexible cord and fixture wire with 24 AWG copper alloy conductor, rated for 600V. With a temperature range of -65 to 150°C, it is ideal for electrical applications requiring durability and flexibility. The wire's tin finish ensures reliable conductivity in various environments.
282784-000
TE Connectivity's 282784-000 wire is a flexible cord with 24 AWG copper alloy conductor, rated for 600V and -65 to 150°C. Ideal for electrical applications requiring durable cables with TIN finish, such as fixtures and power cords.
4126C1332-8
TE Connectivity's 4126C1332-8 cable features stranded construction, Thermorad S jacket, and silver conductor finish. With MIL approvals, it is ideal for communication cables in applications requiring shielding and operating temperatures ranging from -65 to 125°C.
M22759/32-20-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Approvals (V): MIL; No. of Conductors: 1;
45135
Helukabel 45135 is a CE-approved stranded flat cable with PVC jacket and tin finish. With 24 conductors, it's ideal for quick IDC connections at 300V. Operating from -20 to 80°C, this cable has a cross-section area of 0.09mm2 and resistance of 0.23 ohm, making it suitable for various electrical applications.
5853/19BK005
Alpha Wire 5853/19BK005 is a stranded electrical wire with silver finish, TFE insulator, and copper conductor. Rated for 600V, it's MIL-approved and suitable for electronic, medical, and military applications. Operating from -60°C to 200°C, it's a flexible cord & fixture wire in 26 AWG with 19X38 stranding.
16079
Helukabel 16079 is a flexible cord with 7 bare copper conductors, rated at 300V. With PVC insulation and shielding, it operates b/w -40 to 80°C. Suitable for measuring circuits, it has CE, DIN, VDE approvals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2288901
Phoenix Contact
CABLE ASSEMBLY; Connector Side-1: IDC/FLK SOCKET; Connector Side-2: IDC/FLK SOCKET; Rated Voltage: 60 V; Rated Current: 1 A; Shielding: NO;
2288914
2288927
2288930
2288943
2288956
2288969
2288972
2288985
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved