Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 2200322;
Median Price
$2.750
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Quotebeam
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Shortec Electronics
Dynamic Solutions
Vyrian
Native Components
$14.950
Northwest PG Solutions
$16.445
$14.800
Perfect Parts
Assembly Products 2200322 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
Manufacturer Series:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Formosa Microsemi
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Ksl Microdevices
International Semiconductor
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
Sangdest Microelectronics (Nanjing)
Rfe International
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Taiwan Semiconductor
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
64322-1019
Molex
Molex 64322-1019 CONTACT features CRIMP terminal type, 0.0492" min cable entry, and 125°C max operating temp. Ideal for use with 64318-21, 64326 assemblies. Female contact made of copper alloy with 8 mohm resistance, suitable for up to 22 AWG wire size and 0.0551" max cable entry.
1062-16-0144
TE Connectivity
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
DF11-2428SCFA
Hirose Electric
DF11-2428SCFA by Hirose Electric is a crimp terminal with bellowed contact style. Rated for 2A at 250V, it supports wire sizes from 28 to 24 AWG. Ideal for DF11 applications, it has UL approval and operates b/w -30°C to 85°C.
204370-2
TE Connectivity's 204370-2 is a CRIMP terminal CONTACT for 2221860 SERIES CONNECTOR with finish thickness of 50, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a rated current of 5 A and operates b/w -55 °C to 125 °C, making it ideal for SIGNAL applications requiring male contact gender.
160404-2
TE Connectivity's 160404-2 is a MALE contact with STRANDED construction, suitable for DISCRETE WIRE cables. With POLYAMIDE insulator and material, it supports wire sizes from 12 to 10 AWG and operates up to 105°C. Ideal for applications requiring a 0.15-0.25 inch cable entry.
15305171
Aptiv
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SEAL PLUG;
5206514-1
TE Connectivity's 5206514-1 LOCKING POST KIT features a Finish Thickness of 400, Max Wire Size of 0 AWG, and Material made of STEEL. Ideal for applications requiring secure assembly with Mounting Options: #4-40 SCREW.
131250-006
CONNECTOR ACCESSORY; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;
1-487117-1
TE Connectivity 1-487117-1 is an IDC terminal with finish thickness of 30µm. It supports FFC cables, rated for 2A current at -65 to 105°C. Ideal for signal applications, made of phosphor bronze, accommodating up to 0 AWG wire size.
1-968857-1
TE Connectivity 1-968857-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
SZE-002T-P0.3
SZE-002T-P0.3 by J S T Mfg is a CRIMP terminal CONTACT for 28-24 AWG wires with 0.0299-0.0472 inch cable entry. It features FEMALE contact gender, STRAIGHT mounting style, and is made of COPPER ALLOY. Ideal for assembly products requiring precise wire connections in various applications.
2411-002-1805
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
39-00-0078
Molex 39-00-0078 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications with wire size up to 16 AWG and cable entry of 0.122". Commonly used in assemblies for connectors like 5557, 30067, 44516 OR 42474.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
5600230448
Molex 5600230448 is a MINI50 unsealed single row receptacle with crimp terminal type. It has a rated current of 4A and rated DC voltage of 14V, suitable for power applications. Made of copper alloy, it features compression contact style and female contact gender, with cable entry ranging from 0.043" to 0.055".
DZ5CE003
Schneider Electric Sa
DZ5CE003 by Schneider Electric Sa is a plastic ferrule with approvals for NFC and UL. It can handle temperatures from -20 to 105°C, suitable for wire sizes up to 24 AWG. Ideal for electrical assemblies requiring reliable copper connectors in various applications.
16-02-0082
Molex 16-02-0082 CONTACT features CRIMP terminal type, COPPER ALLOY material, and FEMALE contact gender. With a rated current of 3A and max operating temperature of 105°C, it is ideal for applications requiring a reliable connection in assemblies with wire sizes ranging from 30 to 24 AWG.
SSHL-002T-P0.2
SSHL-002T-P0.2 by J S T Mfg is a CRIMP terminal with UL approval, rated for 50V AC/DC and 1A current. Featuring bellowed contact style, made of phosphor bronze, suitable for wire sizes 30-26 AWG. Ideal for applications requiring reliable electrical connections in temperatures ranging from -25 to 85°C.
17E-1657-09
The Amphenol 17E-1657-09 is a D-SUB CONNECTOR BACKSHELL made of ZINC ALLOY. It has a min cable entry of 0.21" and max cable entry of 0.32". Mounting options include SCREW (#4-40). Ideal for secure cable connections in various electronic assemblies.
770520-1
TE Connectivity 770520-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 8A current, and operates b/w -40 to 125 °C. Ideal for applications requiring FEMALE contact gender, ROUND PIN-SOCKET style in straight mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2200156
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
2200148
CONNECTOR ACCESSORY;
2-2000677-9
2200151
2200327
2200323
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 2200323;
2200435
2200172
CONNECTOR ACCESSORY; Assembly Item Name: MOUNTING ITEM; MIL Conformity: NO; IEC Conformity: NO; Material: POLYAMIDE; DIN Conformity: NO;
2200456
2200174
2200241
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 2200241;
2200243
CONNECTOR ACCESSORY; MIL Conformity: NO; Manufacturer Series: 2200243; Assembly Item Name: PROTECTIVE COVER; IEC Conformity: NO; DIN Conformity: NO;
2200155
2200118
2200092
2200246
2200117
2200152
2200321
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved