Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CABLE ASSEMBLY;
Median Price
$42.630
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
DigiKey
1+ parts
$38.550
100+ parts
$34.017
1k+ parts
-
10k+ parts
RS Americas
Airline Hydraulics
$46.920
Quotebeam
Native Components
$20.530
Northwest PG Solutions
$22.583
$20.325
Electrical Wires & Cables 1681224 attributes and parameters. Explore more Electrical Wires & Cables devices from Phoenix Contact
Connector Accessory Type:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS10-32.768KHZ-T
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Fairchild Semiconductor
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M16878/6BDE-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 250 V; Shielding: NO; Additional Features: CHEMICAL/FLAME/MOISTURE RESISTANT, STANDARD: MIL-W-16878/6; MIL Conformity: YES; Conductor Finish: SILVER;
ACW0219-0.75-42(NS)
TE Connectivity's ACW0219-0.75-42(NS) is a stranded electrical wire with 18 AWG bare copper conductor, rated for 50V and operating temperatures from -40 to 150°C. Ideal for primary wire applications, this flexible cord has a cross-section area of 0.75mm2 and a diameter of 1.8mm, suitable for various electrical installations.
1165940002
Weidmueller & Kg
U.FL-2LP-088K1T-A-(300)
Hirose Electric
U.FL-2LP-088K1T-A-(300) by Hirose Electric is a stranded communication cable with FEP jacket and silver conductor finish. It operates b/w -40 to 90°C, suitable for electronic and wireless applications. Featuring 30 AWG wire gauge, it has a diameter of 1.37mm and stranding of 7X0.102 for reliable connectivity.
2213CSL001
Alpha Wire
Alpha Wire 2213CSL001 is a stranded PVC jacketed cable with shielding, rated for 150V. Featuring tin finish copper alloy conductors, it operates b/w -20 to 80°C. Ideal for communication and control applications requiring a durable cable with 6 conductors and 0.326mm2 cross-sectional area.
18356
Helukabel
The Helukabel 18356 is a CE, DIN, EAC approved cable with stranded construction and polyurethane jacket. It features a rated voltage of 300V, suitable for robust applications in dry, damp, and wet rooms. With TPE insulator material and operating temperatures from -40 to 90°C, it's ideal for communication and control purposes.
M16878/4BJE-9
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Minimum Operating Temperature: -60 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Additional Features: CHEMICAL/FLAME/MOISTURE RESISTANT, STANDARD: MIL-W-16878/4;
P564-001
Tripp Lite
115101-20-120
Amphenol
2824013001
TE Connectivity 2824013001 is a flexible cord & fixture wire with 2500V rated voltage. Featuring TIN finish, it has a copper alloy conductor suitable for -65 to 150°C temperatures. Ideal for electrical applications requiring 22 AWG wire gauge and SPEC 44 cable type.
RF179-72SP2-72RP2-0400
Samtec
Samtec RF179-72SP2-72RP2-0400 is a communication cable with FLUORINATED ETHYLENE PROPYLENE jacket, SILVER finish, and POLYTETRAFLUOROETHYLENE insulator. It operates b/w -50 to 165 °C, has AWG 28 wire gauge, and supports 3A current. Ideal for MCX PLUG connections in various applications.
3021021-16
Qualtek Electronics
55A0111-14-0
TE Connectivity 55A0111-14-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring tin finish copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its 14 AWG size and SPEC 55 cable type.
25218
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Approvals (V): CE; EAC; No. of Conductors: 1; Diameter: 1.47 mm;
3055/1SL001
Alpha Wire 3055/1SL001 is a CE, CSA, IEC, and UL approved solid wire with a rated voltage of 300V. Featuring tin conductor finish and PVC insulation, it operates b/w -40 to 105°C. Ideal for applications requiring flexible cord and fixture wire in various industries.
3600B/26
3m Electronic Products Division
3600B/26 wire by 3m Electronic Products Division is a POWER-LIMITED cable with 26 conductors, shielded with PVC jacket. It has approvals from CUL and UL, rated for 150V voltage and operates at max temp of 75°C. Ideal for electrical applications requiring flexibility and durability.
3051/1OR001
Wires and Cables;
687980003
Molex
22759/32-22-0
TE Connectivity's 22759/32-22-0 wire is a flexible cord with 22 AWG copper alloy conductor, rated for 600V. With a temperature range of -65 to 150°C, it is suitable for various electrical applications requiring reliable performance in extreme conditions. Compliant with MIL-DTL-22759 standards, it offers high-quality connectivity solutions.
21020-0211
The Molex 21020-0211 is a flat flexible cable with 20 conductors, rated for 30V and 0.5A. It features tin-finished copper conductors, polyimide insulation, and operates b/w -40 to 80°C. Ideal for applications requiring a compact design with high flexibility and temperature resistance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1681978
CABLE ASSEMBLY; Connector Side-1: PLUG STRAIGHT; Connector Side-2: SOCKET ANGLED; Rated Voltage: 60 V; Rated Current: 4 A; Shielding: NO;
1681606
CABLE ASSEMBLY; Connector Side-1: PLUG STRAIGHT; Connector Side-2: SOCKET STRAIGHT; Rated Voltage: 60 V; Rated Current: 4 A; Shielding: NO;
1681512
CABLE ASSEMBLY; Connector Side-1: PLUG STRAIGHT; Connector Side-2: SOCKET STRAIGHT; Rated Voltage: 250 V; Rated Current: 4 A; Shielding: NO;
1681952
1681635
1681567
CABLE ASSEMBLY; Connector Side-1: PLUG STRAIGHT; Connector Side-2: SOCKET ANGLED; Rated Voltage: 250 V; Rated Current: 4 A; Shielding: NO;
1681981
CABLE ASSEMBLY; Connector Side-1: PLUG STRAIGHT; Connector Side-2: SOCKET ANGLED; Rated Voltage: 24 V; Rated Current: 4 A; Shielding: NO;
1681211
1681622
1681525
1681949
1681648
1681554
1681965
1681509
1681570
1681062
1681541
1681651
1-6812554-6
CABLE ASSEMBLY; Connector Side-1: MRJ21; Connector Side-2: RJ21; Shielding: NO; Wire Gauge (AWG): 24; Application: CATEGORY 5E TELEPHONE AND NON-TELEPHONE APPLICATIONS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved