Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Assembly Item Name: PLATE ITEM; IEC Conformity: NO; DIN Conformity: NO; Approvals (V): UL;
Median Price
$2.270
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.890
100+ parts
$0.813
1k+ parts
$0.737
10k+ parts
-
Newark
$1.670
$1.240
$1.130
Arrow
$1.940
DigiKey
Mouser Electronics
Sager
$2.650
RS Americas
$2.890
$2.170
Airline Hydraulics
Element14
$3.290
$3.160
$3.030
Master Electronics
$2.010
$1.970
Verical
TodayComponents
$1.700
$1.490
Carlton-Bates
$2.550
Quotebeam
Shortec Electronics
Vyrian
ACDS - Activité Composants Distribution Service
Dynamic Solutions
Electro Sonic
$2.520
$2.200
$2.090
Elcom Components
A2Z Electronics, Inc.
Proax Technologies Ltd
DF Sales Co.
Amar Radio Corporation
Authorized Procurement Solutions
Northwest PG Solutions
Native Components
Perfect Parts
Assembly Products 1413285 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Approvals (V):
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
1413285 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8547.20.00.00
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Hitano Enterprise
0460-010-20141
TE Connectivity
TE Connectivity's 0460-010-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 16-18 AWG wires at 7.5A current. Ideal for male connectors in straight mounting applications.
0460-202-1631
TE Connectivity's 0460-202-1631 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 150 °C, suitable for wire gauges 16-20 AWG. With a rated current of 13 A, it is commonly used in male contact applications requiring a straight mounting style and round pin-socket contact design.
3-2198618-7
TE Connectivity's 3-2198618-7 BACKSHELL is an assembly product with a shielding feature. It has shell sizes of 4 and can accommodate wires up to 0 AWG. Made of ABS material, it offers mounting options with screws (#4-40).
1062-20-0222
TE Connectivity 1062-20-0222 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and straight mounting style with copper alloy material.
M23053/16-003-0
TE Connectivity's M23053/16-003-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating b/w -75°C to 150°C. Ideal for various assembly applications requiring high temperature resistance and robust insulation.
87116-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; MIL Conformity: NO; Material: NYLON66; Assembly Item Name: KEYING ITEM;
SPHD-001T-P0.5
J S T Mfg
SPHD-001T-P0.5 by J S T Mfg is a CRIMP terminal for PBV SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.039-0.059 inch cable entry. Ideal for 26-22 AWG wires in applications requiring FEMALE contacts at -25 to 85 °C temperature range.
3030514
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END COVER; DIN Conformity: NO;
3595
Keystone Electronics
Assembly Items;
282404-1
TE Connectivity's 282404-1 is a CAP HOUSING with CRIMP terminals. It has a Finish Thickness of 236.22, operates b/w -40 to 125 °C, and supports wire gauge from 20 to 22 AWG. Ideal for applications requiring male ROUND PIN-SOCKET contacts in DISCRETE WIRE assemblies.
DTP04-4P-P059
TE Connectivity's DTP04-4P-P059 is a male power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for assembly products requiring high voltage and current capabilities in various applications.
1062-20-0144
TE Connectivity 1062-20-0144 is a CRIMP terminal with stamped contact design. It supports wire gauge from 22 to 16 AWG, rated for 7.5A current. Ideal for power applications with operating temperatures ranging from -55°C to 150°C.
850-001-22-348
CONNECTOR ACCESSORY; Manufacturer Series: 850;
08-50-0106
Molex
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
500798001
Molex 500798001 is a UL-approved assembly product with finish thickness of 35.43µm. It features crimp terminal type, rated for 2A at 125V AC/DC. Ideal for applications like 51021 housing with female contact gender and blade pin-skt design.
20824050001
Harting Electronics & Kg
CONNECTOR ACCESSORY;
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
5-963715-1
TE Connectivity 5-963715-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, cross section area of 0.75 mm2, and rated current of 7.5 A. Ideal for applications requiring female contact gender and operating temperatures ranging from -40 to 120 °C.
SYM-001T-P0.6(N)
SYM-001T-P0.6(N) by J S T Mfg is a CRIMP terminal with approvals from TUV and UL. It supports wire sizes from 28 AWG to 22 AWG, rated for 3A current at 250V AC/DC. Ideal for applications requiring male contacts in straight mounting style with operating temperatures ranging from -25°C to 85°C.
350536-1
TE Connectivity's 350536-1 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CSA, UL, VDE approvals. It features CRIMP terminals for 14-20 AWG wires, rated at 600V and 19A. Constructed with STRANDED wire support, it has a temperature range of -55 to 105 °C and is ideal for POWER applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1413996
1413052
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): GOST; Assembly Item Name: END COVER;
1413388
1413081
TERMINAL BLOCK ACCESSORY; Assembly Item Name: END COVER; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Approvals (V): GOST;
1413362
1413376
1413272
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: PLATE ITEM; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): UL;
1413389
1413049
CONNECTOR ACCESSORY; Manufacturer Series: 1413049;
1413363
1413104
CONNECTOR ACCESSORY; Manufacturer Series: 1413104;
1413364
1413375
1413230
TERMINAL BLOCK ACCESSORY;
1413377
1413065
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: SPACER PLATE; Approvals (V): GOST;
1413023
1413365
1413227
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved