Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY;
Median Price
$0.460
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.253
1k+ parts
$0.252
10k+ parts
-
Shortec Electronics
Dynamic Solutions
Northwest PG Solutions
$2.376
Perfect Parts
Native Components
$2.095
Assembly Products 1200307 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Connector Accessory Type:
1200307 Connector Accessories trade compliance attributes, and parameters.
NSN
5910-99-632-8193, 5910996328193, 5940-12-197-7841, 5940121977841
NIIN
996328193, 121977841
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
Baneasa S A
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SXH-001T-P0.6N
J S T Mfg
SXH-001T-P0.6N by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes ranging from 26 AWG to 22 AWG and can handle up to 3A of current at a max operating temperature of 85°C. Ideal for applications requiring a FEMALE contact with a contact resistance of 10 mΩ.
RC16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Rated AC Voltage: 220 V; Assembly Item Name: CONTACT; Contact Resistance: 2.5 mohm; Contact Gender: FEMALE;
FMK1G
Molex
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
SPUD-001T-P0.5
SPUD-001T-P0.5 by J S T Mfg is a UL approved CONTACT with CRIMP terminal type, rated for 250V AC/DC, 3A current. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 26-22 AWG and operating temperatures of -25 to 85°C.
SSF-21T-P1.4
SSF-21T-P1.4 by J S T Mfg is a CSA and UL approved CRIMP terminal connector with 2.1" min cable entry, -40 to 105°C temp range, ideal for 22-18 AWG wires in power applications. Featuring a FEMALE contact gender, PHOSPHOR BRONZE material, and 7A rated current capacity for reliable connections.
5748677-1
TE Connectivity
TE Connectivity 5748677-1 is a shielded backshell with polyethylene material. It supports plug/receptacle usage, #4-40 and screw mounting options, and accommodates cables up to 0.32 inch. Operating temperature ranges from -55 to 85 °C, suitable for various assembly applications.
5748676-2
TE Connectivity 5748676-2 is a backshell with 2 shell sizes, shielding, and 0.185" min cable entry. Ideal for plug/receptacle applications with max temp of 105°C. Features zinc alloy material, #4-40 screw mounting options, and supports up to 0 AWG wire size.
64322-1019
Molex 64322-1019 CONTACT features CRIMP terminal type, 0.0492" min cable entry, and 125°C max operating temp. Ideal for use with 64318-21, 64326 assemblies. Female contact made of copper alloy with 8 mohm resistance, suitable for up to 22 AWG wire size and 0.0551" max cable entry.
43031-0006
The Molex 43031-0006 contact is designed for use with 43020, 43640, and 44300 assemblies. It features a CRIMP terminal type, CHAIN contact design, and PHOSPHOR BRONZE material. This male contact supports wire sizes from 30 to 26 AWG with a 0.137 inch length for various applications.
08-50-0106
Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.
12103881
Aptiv
CONNECTOR ACCESSORY; Material: COPPER ALLOY; DIN Conformity: NO; Maximum Cable Entry: .079 inch; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN;
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
WM-12P
The TE Connectivity WM-12P is an assembly product designed for DTM SERIES applications. It features a max operating temperature of 125°C and a min operating temperature of -55°C. With a design for power and signal, it supports wire sizes up to 0 AWG using polybutylene terephthalate material.
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
SWPT-001T-P025
CONNECTOR ACCESSORY;
SEH-001T-P0.6
SEH-001T-P0.6 by J S T Mfg is a CRIMP terminal connector with approvals from CSA, TUV, and UL. Rated for 250V AC/DC, 3A current, it supports wire sizes from 30 to 22 AWG. Ideal for EH SERIES CONNECTOR applications due to its FEMALE contact gender and PHOSPHOR BRONZE material.
1053001100
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
2288226-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 85 Cel; Material: ALUMINUM ALLOY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel;
AT06-3S-CAP
Amphenol
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-2000713-6
CONNECTOR ACCESSORY; Mounting Style: RIGHT ANGLE; Maximum Operating Temperature: 125 Cel; Material: ALUMINUM ALLOY; Minimum Operating Temperature: -55 Cel;
1-2000676-2
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel;
1-2000713-3
CONNECTOR ACCESSORY; Terminal Type: SOLDER; DIN Conformity: NO; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO;
1-200833-1
TE Connectivity 1-200833-1 is a 20-position high voltage connector with max operating temp of 150°C and min of -55°C. Featuring stainless steel construction, it supports wire size up to 0 AWG. Ideal for power and signal applications, it offers mounting options with screws or #4-40 bolts.
1-2000713-2
CONNECTOR ACCESSORY; Mounting Style: RIGHT ANGLE; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel; Terminal Type: SOLDER; Material: STAINLESS STEEL;
1-2000713-4
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Material: ALUMINUM ALLOY; Mounting Style: RIGHT ANGLE; Minimum Operating Temperature: -55 Cel;
1-200835-1
TE Connectivity 1-200835-1 is a POWER AND SIGNAL assembly product made of STAINLESS STEEL. It supports wire sizes up to 0 AWG with operating temperatures ranging from -55°C to 150°C. Ideal for applications requiring secure mounting using #4-40 screws.
1200293
Phoenix Contact
1200308
1200107
1200310
1200106
1200309
1200108
1200311
1200163
1200164
1200104
1200264
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved