Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Operating Temperature: 100 Cel; MIL Conformity: NO; Approvals (V): UL; Assembly Item Name: MARKER STRIP;
Median Price
$2.690
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.589
100+ parts
-
1k+ parts
10k+ parts
Conrad
$1.615
$1.431
DigiKey
Mouser Electronics
RS Americas
$3.180
$2.450
Airline Hydraulics
$3.240
Newark
$5.890
$4.520
$4.120
Master Electronics
Verical
$3.436
TTI
TodayComponents
$1.510
$1.190
Quotebeam
FDH Electronics
$5.750
$3.433
$3.333
Shortec Electronics
Vyrian
Dynamic Solutions
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Nova Conductors
Proax Technologies Ltd
IBS Electronics
$3.773
Electro Sonic
$2.520
$2.350
$2.320
VNN
Powertech Controls
Elcom Components
Ampacity Inc.
$0.500
Neutron USA
$74.260
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Aranea Global
Amble Industries
Standard Data Resources (Excess)
Assembly Products 1053001 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Approvals (V):
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
1053001 Connector Accessories trade compliance attributes, and parameters.
NSN
5330-12-178-8794, 5330121788794, 5330-15-134-4631, 5330151344631, 5355-12-143-1428, 5355121431428, 5930-00-974-1583, 5930009741583, 5940-01-535-0473, 5940015350473, 6515-19-000-3399, 6515190003399, 6650-15-134-2773, 6650151342773
NIIN
121788794, 151344631, 121431428, 009741583, 015350473, 190003399, 151342773
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Bytesonic Electronics
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
NXP Semiconductors
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
WM-4P
TE Connectivity
TE Connectivity's WM-4P is a power and signal assembly item designed for DTM SERIES. With a max operating temp of 125°C and min of -55°C, it supports wires up to 0 AWG. Made of PBT, it's ideal for various applications requiring reliable connections in extreme temperature conditions.
DF14-2628SCFA
Hirose Electric
DF14-2628SCFA by Hirose Electric is a 1A contact with crimp terminal type. It has a rated AC voltage of 150V and operating temperature range from -35 to 85°C. Ideal for discrete wire applications, featuring bellowed type contact style and phosphor bronze material for durability.
350218-3
TE Connectivity 350218-3 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CRIMP terminals. It has a rated voltage of 600V, rated current of 19A, and wire gauge range from 20 AWG to 14 AWG. Ideal for power applications with approvals from CSA, UL, and VDE.
3022276
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Approvals (V): UL; Material: PA; Mounting Style: STRAIGHT;
194200002
Molex
Molex 194200002 is a female contact with crimp terminal type, suitable for 19418 series receptacle housing. It has a finish thickness of 75 units and supports wire sizes from 22 AWG to 18 AWG. The contact design is strip made of copper alloy material with a length of 0.295 inch, ideal for straight mounting applications.
1SNK708911R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
1727040096
Molex 1727040096 BACKSHELL is an Assembly Product for FCT D-SUB usage. Features include Zinc Alloy material, 0.118" to 0.374" cable entry, -35°C to 100°C operating temperature range. Mounting options: 4-40 UNC screw.
0462-201-20141
TE Connectivity's 0462-201-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 20 AWG wires at 7.5 A current. Ideal for POWER applications requiring FEMALE ROUND PIN-SOCKET contacts.
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
87421-0002
Molex 87421-0002 is a UL-approved CRIMP CONTACT for 26 AWG wire. FEMALE SQUARE PIN-SOCKET with 0.098" terminal length. Ideal for STRAIGHT mounting in Assembly Products.
39-00-0428
The Molex 39-00-0428 is a power contact assembly product with a crimp terminal type. It is designed for use with 5557, 30067, 44516 or 42474 housing and has a finish thickness of 30. This contact is made of brass and can accommodate wire sizes ranging from 24 AWG to 18 AWG.
234A061-25/86-0
CONNECTOR ACCESSORY; Minimum Operating Temperature: -75 Cel; Maximum Operating Temperature: 150 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;
1-968857-1
TE Connectivity 1-968857-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.
1-66109-7
TE Connectivity 1-66109-7, a crimp terminal for CPC/G and M series connectors, features brass material, 24-26 AWG wire gauge compatibility, and 13A rated current. Ideal for power and signal applications with CSA/UL approvals and operating temperatures from -55 to 90°C.
W3S-1939-P012
TE Connectivity's W3S-1939-P012, part of Assembly Products, is designed for DT SERIES applications. With a temperature range of -55 to 125°C, it accommodates up to 0 AWG wire size. The POWER AND SIGNAL design features POLYBUTYLENE TEREPHTHALATE material for reliable performance.
ZX20-B-5S-UNIT(30)
CONNECTOR ACCESSORY;
1SET111002R0000
TE Connectivity's 1SET111002R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 20 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
C88E000218M26S
Northern Technologies
CONNECTOR ACCESSORY; Mounting Option-1: M2.6; DIN Conformity: NO; Assembly Item Name: COVER ITEM; Mounting Option-2: SCREW; Material: ZINC ALLOY;
12066614
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; DIN Conformity: NO; Maximum Cable Entry: .079 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .039 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1053002300
Molex 1053002300 is a NANO-FITTM receptacle housing with 30 finish thickness. It features CRIMP terminal type, rated for 300V AC voltage and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with 0.06" cable entry.
1053001200
Molex 1053001200 is a NANO-FITTM RECEPTACLE HOUSING with CRIMP terminals, rated for 6.5A at 300V. It features a finish thickness of 15µm, copper alloy construction, and compression contact style. Ideal for power applications requiring female contacts in straight mounting configuration.
1053001100
1053002100
1053251004
1053002200
Molex 1053002200 is a NANO-FITTM receptacle housing with 15 finish thickness. It features crimp terminal type, rated for 300V AC and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with female contact gender and compression style.
1053438
TERMINAL BLOCK ACCESSORY;
1053251002
1053001300
Molex 1053001300 is a NANO-FIT RECEPTACLE HOUSING with CRIMP terminals for 24-26 AWG wires. Rated at 250V AC and 6.5A, it features FEMALE contacts made of COPPER ALLOY. Ideal for POWER applications with 0.051" cable entry, offering reliable compression-style connections.
1053002400
1053251003
1053014:0001
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: MARKING ITEM;
1053001400
1053252004
1053251007
1053251005
1053252002
1053027-0001
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Operating Temperature: 100 Cel; Approvals (V): UL; Material: PA;
1053014:0101
1053960000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Approvals (V): UL; Minimum Operating Temperature: -50 Cel; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved