Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: MARKER STRIP; IEC Conformity: NO; MIL Conformity: NO;
Median Price
$2.430
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.959
100+ parts
-
1k+ parts
10k+ parts
DigiKey
Mouser Electronics
RS Americas
$2.550
$2.170
Master Electronics
Verical
$3.103
TodayComponents
$1.480
$1.070
Nova Conductors
$2.540
VNN
Shortec Electronics
Dynamic Solutions
Omnical
Electro Sonic
$2.300
$2.160
$2.130
IBS Electronics
$3.512
Powertech Controls
ACDS - Activité Composants Distribution Service
Vyrian
Ampacity Inc.
$0.820
Authorized Procurement Solutions
Perfect Parts
Netroflash
$2.489
$2.413
$2.362
Assembly Products 1050017:0051 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Wuxi Xuyang Electronic
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
NXP Semiconductors
Electronic Transistors
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Eic Semiconductor
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
39-00-0181
Molex
Molex 39-00-0181 is a power contact with square pin-socket design. It supports wire sizes from 24 to 18 AWG and has a finish thickness of 30. Ideal for use in housings like 5557, 30067, 44516, or 42474 with 0.051" to 0.122" cable entry.
C88E0002181
Northern Technologies
CONNECTOR ACCESSORY; Mounting Option-1: 4-40; Usage: CM CONNECTOR; Assembly Item Name: COVER ITEM; Mounting Option-2: SCREW; IEC Conformity: NO;
1-350524-9
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0;
19000005190
Harting Electronics & Kg
CONNECTOR ACCESSORY;
1-968849-1
TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.
282404-1
TE Connectivity's 282404-1 is a CAP HOUSING with CRIMP terminals. It has a Finish Thickness of 236.22, operates b/w -40 to 125 °C, and supports wire gauge from 20 to 22 AWG. Ideal for applications requiring male ROUND PIN-SOCKET contacts in DISCRETE WIRE assemblies.
350536-1
TE Connectivity's 350536-1 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CSA, UL, VDE approvals. It features CRIMP terminals for 14-20 AWG wires, rated at 600V and 19A. Constructed with STRANDED wire support, it has a temperature range of -55 to 105 °C and is ideal for POWER applications.
M23053/5-106-0
Sumitomo Electric Industries
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
C88E000209
Mh Connectors
C88E000209 by Mh Connectors is a BACKSHELL assembly product made of ZINC. It has a max operating temperature of 90°C and a min operating temperature of -25°C. It can be mounted using JACK SCREW or 4-40, making it suitable for various applications requiring secure connections in challenging environments.
39-00-0220
Molex 39-00-0220 CONTACT features square pin-socket design, made of phosphor bronze. Suitable for 5559, 30068, 42475 SERIES HOUSING with wire sizes ranging from 24 AWG to 18 AWG. Offers 0.051" to 0.122" cable entry and 0.169" terminal length for CRIMP terminals.
1-966067-2
TE Connectivity 1-966067-2 is a STRANDED cable with 16 AWG wire gauge and 1.5 mm² cross section area. It has a max operating temperature of 105°C, suitable for DISCRETE WIRE applications requiring a straight mounting style.
1727040100
Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.
170366-1
TE Connectivity's 170366-1 plug housing features a stranded construction with crimp terminals, rated for 600V and 7A. Suitable for discrete wire applications, it has a brass design with female contacts and operates b/w -20 to 105°C.
W8S
W8S by TE Connectivity is an assembly product designed for the DT SERIES. It has a max operating temperature of 125°C and a min operating temperature of -55°C. With a max wire size of 0 AWG, it is suitable for power and signal applications using polybutylene terephthalate material.
WM-4S
TE Connectivity's WM-4S is a POWER AND SIGNAL WEDGE ITEM for DTM SERIES assemblies. It supports wire sizes up to 0 AWG, with a temp range of -55 to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.
293736-1
TE Connectivity's 293736-1 is a male power contact with max operating temp of 85°C and min of -20°C. It supports wire size up to 0 AWG, made of polyamide. Ideal for assembly products requiring high-power connections in various industries.
SA3348/1
Bulgin
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
SSH-003GA-P0.2
J S T Mfg
SSH-003GA-P0.2 by J S T Mfg is a CRIMP terminal with contact design of STRIP OR LOOSE, suitable for 28-32 AWG wires. It has a rated current of 1A and can handle temperatures from -25 to 85 °C. Ideal for applications requiring FEMALE contacts with bellowed contact style in assembly products.
855-9900
Wago
TERMINAL BLOCK ACCESSORY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1050017:0001
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Manufacturer Series: 1050017:0001; Assembly Item Name: TERMINAL MARKER;
1050004
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MARKER STRIP; IEC Conformity: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO; MIL Conformity: NO;
1050033:0021
1050017:0021
TERMINAL BLOCK ACCESSORY; Manufacturer Series: 1050017:0021; Assembly Item Name: MARKER STRIP; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
1050017:0041
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKER STRIP; IEC Conformity: NO;
1050017:0011
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Manufacturer Series: 1050017:0011; Assembly Item Name: MARKER STRIP;
1050033:0002
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: TERMINAL MARKER; MIL Conformity: NO; Material: PA; Approvals (V): UL;
1050020:0041
1050415
1050020:0011
1050000000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -50 Cel; Maximum Operating Temperature: 120 Cel; IEC Conformity: NO; DIN Conformity: NO; Approvals (V): UL;
1050020:0001
105-050-201-200
Edac
CONNECTOR ACCESSORY; Rated Current: 10 A; Terminal Length: .122 inch; IEC Conformity: NO; Terminal Type: SOLDER; DIN Conformity: NO;
1050033:0004
1050017:0231
1050017:0081
1050017:0091
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: MARKER STRIP;
1050017:0171
1050017:0181
1050017:0191
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved