Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -30 Cel; MIL Conformity: NO; Material: CELLULOSE ACETATE; IEC Conformity: NO; Maximum Operating Temperature: 110 Cel;
Median Price
$23.870
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$22.140
$21.990
Master Electronics
$41.880
$22.510
$22.290
Vyrian
Dynamic Solutions
Shortec Electronics
ACDS - Activité Composants Distribution Service
Aztec Data Supply Inc.
$5.965
Native Components
$10.513
Northwest PG Solutions
$11.564
$10.408
Assembly Products 1007028:0041 attributes and parameters. Explore more Assembly Products devices from Phoenix Contact
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Electrification has been the core expertise of Phoenix Contact since its foundation in 1923. In the 21st century, Phoenix Contact is committed to empowering the “All Electric Society,” a future in which energy from renewable resources is available in sufficient quantities and at affordable prices. In addition to the consistent generation and use of renewable energies, reducing the primary energy demand through efficiency measures and creating intelligent and networked systems are key to a sustainable future. To be able to base renewable energy use on demand, solutions and technologies for electrification, networking, and automation are needed in order to realize sector coupling. Phoenix Contact focuses on solutions for the “All Electric Society.” More than 20,000 employees and strong growth through the broad portfolio and focus on the solutions business are helping to make this a reality.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
880810-1
TE Connectivity
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: BOOT; Maximum Wire Size: 0 AWG;
AT06-4S-CAP
Amphenol
CONNECTOR ACCESSORY;
39-00-0073
Molex
Molex 39-00-0073 is a POWER CONTACT with FEMALE gender, SQUARE PIN-SOCKET style. Made of BRASS material, it has a 0.169" terminal length and supports wire sizes from 24 AWG to 18 AWG. Ideal for use with 5557, 30067, 44516 or 42474 HOUSING assemblies.
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
1011-344-0205
TE Connectivity 1011-344-0205 is a male plug assembly product with max operating temp of 125°C and min of -55°C. It features plastic material, cap item name, and supports wire size up to 0 AWG. Ideal for applications requiring stud mounting option at 0.200".
39-00-0220
Molex 39-00-0220 CONTACT features square pin-socket design, made of phosphor bronze. Suitable for 5559, 30068, 42475 SERIES HOUSING with wire sizes ranging from 24 AWG to 18 AWG. Offers 0.051" to 0.122" cable entry and 0.169" terminal length for CRIMP terminals.
DF3-22SCF
Hirose Electric
DF3-22SCF by Hirose Electric is a female contact with bellowed type, made of phosphor bronze. It has a finish thickness of 39.4 and terminal length of 0.108 inch. This assembly product is used for crimp terminals in straight mounting applications.
1761008-3
TE Connectivity's 1761008-3 features COMPLIANT FIT terminals, operating from -55 to 85°C. With a SIGNAL design and max wire size of 0 AWG, it is ideal for CAGE ASSEMBLY applications in various industries.
08-55-0101
Molex 08-55-0101 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with compression style in straight mounting. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 15.
FMK2G-K201
Fct Electronic
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Operating Temperature: 100 Cel; Assembly Item Name: HOOD; Material: ZINC;
175218-2
TE Connectivity's 175218-2 is a CRIMP terminal with GLASS FILLED POLYESTER insulator. With a rated current of 15A, it supports wire gauge from 20 to 16 AWG. Ideal for POWER AND SIGNAL applications, it features CSA and UL approvals.
M85049/88-19W03
CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;
1-1469492-1
TE Connectivity 1-1469492-1 is an Assembly Product with max. operating temp. of 105°C and min. operating temp. of -55°C. It features a max wire size of 0 AWG, rated current of 1A, and mounting style in right angle zinc alloy material. Ideal for guiding items in various applications.
WP-2S
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE;
46999-0101
The Molex 46999-0101 is a female contact with compression style, made of brass. It is used in the 7880 Series Housing assembly products for wire sizes ranging from 30 AWG to 24 AWG. The contact design is loose, with a finish thickness of 100 and terminal length of 0.186 inch, suitable for straight mounting applications.
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
1SET111008R0000
TE Connectivity's 1SET111008R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge and operates at max 105°C temperature. Ideal for applications requiring DISCRETE WIRE connections with STRAIGHT mounting style.
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
C01600V00001012
CONNECTOR ACCESSORY; Manufacturer Series: C016;
DE-24657
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Material: METAL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: JUNCTION SHELL; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
10073978-014LF
Amphenol Communications Solutions
CONNECTOR ACCESSORY; Maximum Operating Temperature: 105 Cel; DIN Conformity: NO; Assembly Item Name: STRAIN RELIEF; Approvals (V): CSA, UL; MIL Conformity: NO;
1007015
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
1007028
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MARKING ITEM; MIL Conformity: NO; Material: CELLULOSE ACETATE; Maximum Operating Temperature: 110 Cel; Approvals (V): DIN;
1007028:0001
CONNECTOR ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -30 Cel; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
1007028:0021
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MARKING CARD; DIN Conformity: NO; Minimum Operating Temperature: -30 Cel; MIL Conformity: NO; Material: CELLULOSE ACETATE;
1007031
1007044
1007219
1007222
1007235
1007248
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MARKING ITEM; Minimum Operating Temperature: -30 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
1007316
1007329
1007332
1007358
1007604
1007714
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved