Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DC BLOWER; Construction: CROSS FLOW; Airflow: 58.9 CFM; Width: 50 mm; Power (Rated): 8 W; Voltage (Rated): 24 V;
Median Price
$132.670
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$79.900
100+ parts
-
1k+ parts
10k+ parts
Arrow
$81.490
Verical
$108.250
$100.100
$81.730
Bürklin Elektronik
$124.780
$113.760
Master Electronics
$104.260
$104.000
DigiKey
$133.330
$107.126
Mouser Electronics
$136.090
Farnell
$145.050
Element14
$157.250
$118.000
Nova Conductors
$103.490
Galco
$111.920
TME
$133.090
IBS Electronics
$174.207
$141.895
$141.536
Vyrian
Continental Prestige Electronics
$101.420
Netroflash
Neutron USA
$160.540
Argo Parts USA
Perfect Parts
Industrial Fans & Blowers QG030-198/14 attributes and parameters. Explore more Industrial Fans & Blowers devices from Papst
Thermal Device Type:
Rated Voltage:
Airflow Volume:
Rated Power:
Noise Level:
Minimum Operating Temperature:
Maximum Operating Temperature:
Height:
Width:
Length:
Body Weight:
Bearing Style:
Construction:
Lifespan:
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
Continental Device India
8214JN
Ebm-papst Mulfingen & Kg
8214JN by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 77.692 CFM, noise level of 55 dB, and operates at 24V. It is ideal for applications requiring efficient cooling in a compact space due to its axial construction and low noise operation.
3414NG
Papst
DC FAN; Construction: AXIAL; Weight: 100 g; Maximum Operating Temperature: 70 Cel; Voltage (Rated): 24 V; Bearing Type: SLEEVE;
AFB1224VHE-CF00
Delta Electronics
Delta Electronics AFB1224VHE-CF00 is an industrial DC FAN with 148.34 CFM airflow and 55 dB noise level. It operates at 24 V, has a speed of 4000 rpm, and is suitable for various applications requiring efficient cooling in industrial settings.
FFB1224EHE-F00
Delta Electronics FFB1224EHE-F00 is an industrial DC fan with 190 CFM airflow and 63 dB noise level. With approvals from CE, CSA, and UL, it operates at 24V voltage, 1.5A current, and consumes 36W power. Ideal for cooling applications in tight spaces due to its compact size of 120x120x38 mm.
4414HH
4414HH by Ebm-papst Mulfingen & Kg is an industrial DC FAN with 167.7 CFM airflow, 55 dB noise level, and 5000 rpm speed. Ideal for cooling systems in various applications due to its compact size (119x38 mm) and approval ratings from CSA and UL.
4114N/2H8P
4114N/2H8P by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 335.489 CFM, operating at 11000 rpm and rated for 24 V. With a life expectancy of 22500 h, it's ideal for applications requiring high air circulation and cooling efficiency in environments ranging from -20 to 75 °C.
OD1238-24LBXC
Knight Electronics
DC FAN;
3612KL-04W-B30-B00
Nmb Technologies
The Nmb Technologies 3612KL-04W-B30-B00 is an industrial DC FAN with airflow of 47.3 CFM and noise level of 34 dB. Ideal for applications requiring a reliable fan with UL approval, operating at -10 to 60 °C, offering a long lifespan of 100000 h.
F251R-12LLC
Nidec
DC FAN; Body Material: ABS/PBT ALLOY; Length: 25 mm; Width: 10 mm; Pressure: 2.039 mmH2O; Bearing Type: SLEEVE;
4650N
4650N by Ebm-papst Mulfingen & Kg is an AC FAN with airflow of 94.17 CFM and noise level of 46 dB. With a rated voltage of 230 V, it is ideal for industrial applications requiring efficient cooling in compact spaces. The fan's SINTEC SLEEVE bearing type ensures a long lifespan of up to 27500 h.
512F
DC FAN; Construction: AXIAL; Noise: 30 dB; Speed: 5000 rpm; Width: 15 mm; Maximum Operating Temperature: 70 Cel;
3414NGL
3414NGL by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 35.3 CFM and noise level of 23 dB. With a rated voltage of 24V, it operates at speeds up to 1950 rpm, making it ideal for cooling applications in various industries.
PFB1248UHE-EP
Delta Electronics PFB1248UHE-EP is an industrial DC FAN with 243.66 CFM airflow, 70 dB noise level, and 5300 rpm speed. Ideal for cooling systems in applications requiring high air pressure and low noise levels.
W3G250-HK19-11
W3G250-HK19-11 by Ebm-papst Mulfingen & Kg is an AC FAN with 1120 CFM airflow, 71 dB noise level, and UL approval. It operates at -25 to 60 °C and is ideal for industrial applications requiring efficient cooling in a compact design.
3312NH3
3312NH3 by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 78.28 CFM and noise level of 50 dB. With a rated voltage of 12 V, it operates at speeds up to 4350 rpm. Ideal for applications requiring efficient cooling in limited space with a long life expectancy of 30000 h.
8414NML
8414NML by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 26.5 CFM, operating at 2050 rpm. With a rated voltage of 24 V and power consumption of 1.1 W, it's ideal for cooling applications in various industries due to its axial construction and long life expectancy of 80000 h.
6314/2TDHHP
6314/2TDHHP by Ebm-papst Mulfingen & Kg is an industrial DC FAN with airflow of 417.89 CFM and noise level of 69 dB. With a rated voltage of 24 V, it operates at speeds up to 7000 rpm. Ideal for applications requiring high airflow and low noise levels in industrial settings.
412FM
DC FAN; Construction: AXIAL; Weight: 17 g; Airflow: 3.53 CFM; Height: 40 mm; Speed: 4300 rpm;
OA172SAP-11-1TBXC
Knight Electronics' OA172SAP-11-1TBXC AC FAN offers 300 CFM airflow at 61 dB noise level. With a rated voltage of 120 V, it operates b/w -40 to 70 °C and has a life expectancy of 60000 h. Ideal for industrial applications requiring efficient cooling with dimensions of 172x150x51 mm.
QFR1224GHE-SP01
Fans/Blowers;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QG030-148/12
DC BLOWER; Construction: CROSS FLOW; Noise: 49 dB; Length: 201 mm; Width: 50 mm; Bearing Type: BALL;
DC BLOWER; Construction: CROSS FLOW; Length: 201 mm; Bearing Type: BALL; Height: 47.5 mm; Width: 50 mm;
QG030-353/12
DC BLOWER; Construction: CROSS FLOW; Voltage (Rated): 12 V; Power (Rated): 9.6 W; Noise: 51 dB; Minimum Operating Temperature: -20 Cel;
DC BLOWER; Construction: CROSS FLOW; Maximum Operating Temperature: 60 Cel; Voltage (Rated): 12 V; Minimum Operating Temperature: -20 Cel; Width: 50 mm;
QG030-148/14
DC BLOWER; Construction: CROSS FLOW; Height: 47.5 mm; Length: 201 mm; Airflow: 44 CFM; Width: 50 mm;
QG030-148/14 by Ebm-papst Mulfingen & Kg is an industrial DC blower with a max airflow of 44 CFM and noise level of 49 dB. It has a height of 47.5 mm, width of 50 mm, and length of 201 mm, making it suitable for various applications requiring efficient cooling and ventilation in limited spaces.
QG030-303/12
DC BLOWER; Construction: CROSS FLOW; Weight: 367.41 g; Maximum Operating Temperature: 60 Cel; Speed: 3800 rpm; Life Expectancy: 30000 h;
DC BLOWER; Construction: CROSS FLOW; Minimum Operating Temperature: -20 Cel; Airflow: 82.4 CFM; Width: 50 mm; Weight: 367.41 g;
QG030-303/14
DC BLOWER; Construction: CROSS FLOW; Bearing Type: BALL; Maximum Operating Temperature: 60 Cel; Height: 47.5 mm; Weight: 380 g;
DC BLOWER; Construction: CROSS FLOW; Maximum Operating Temperature: 60 Cel; Noise: 51 dB; Length: 363 mm; Weight: 380 g;
QG030-198/12
DC BLOWER; Construction: CROSS FLOW; Noise: 51 dB; Height: 47.5 mm; Bearing Type: BALL; Width: 50 mm;
QG030-198/12 by Ebm-papst Mulfingen & Kg is an industrial DC blower with 59 CFM airflow and 51 dB noise level. It operates at 12V, 8W power, and has a life expectancy of 30000h. Ideal for applications requiring efficient cooling in limited spaces.
QG030-198/14
QG030-198/14 by Ebm-papst Mulfingen & Kg is an industrial DC blower with a max airflow of 58.9 CFM and noise level of 51 dB. It has a height of 47.5 mm, width of 50 mm, and length of 258 mm, making it suitable for various applications requiring efficient air circulation and cooling.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved