Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Panasonic EXB2HV101JV is a resistor network with 8 functions, each with 100 ohm resistance. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and isolated network type.
Median Price
$0.083
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.200
100+ parts
$0.082
1k+ parts
$0.057
10k+ parts
-
Farnell
$0.094
Element14
$0.093
Newark
Verical
$0.077
Master Electronics
$0.034
Arrow
$0.030
Future Electronics
$0.062
Chip1Stop
$0.035
TTI
$0.240
Nova Conductors
Forefront Electronics and Design
$0.370
IBS Electronics
$0.041
Vyrian
Prism Electronics
Electro Sonic
$0.032
PC Components Company LLC
NAC Semi
$0.132
Elcom Components
Semi Source
Bristol Electronics
Inventory MP
Sensible Micro Corp
Quantum Digital Technology
Atlantic Semiconductor
Semtec, LLC
LWI Electronics Inc
Argo Parts USA
$0.090
Netroflash
$0.088
$0.086
Aztec Data Supply Inc.
$0.297
Andel Nordic
$4.409
$4.233
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Continental Prestige Electronics
$0.056
$0.055
QUARKTWIN TECHNOLOGY LTD
EMSNET (Excess)
Kepictronics
Metaverse IC Inc.
Corohmni
Low power dissipation makes this product energy efficient and helps in reducing heat generation.
With a rated temperature of 70°C, this product can operate efficiently in a wide range of temperature environments.
Having 8 functions allows for more versatility and flexibility in circuit design.
Metal glaze and thick film technology ensure high performance and reliability in various applications.
Rectangular package shape makes it easy to handle and mount in various electronic systems.
Rectangular construction provides a compact design for space-constrained applications.
TR packaging method with punched holes and 7-inch packaging ensures secure and convenient handling.
Isolated network type offers better performance and reliability in circuit isolation.
Having a resistance of 100 ohms allows for precise control in electronic circuits.
16 terminals provide more connection options for complex circuit configurations.
SMT package style enables easy surface mounting on circuit boards for efficient assembly.
Wraparound terminal shape ensures secure connections and reliability in circuit operation.
With a maximum operating temperature of 125°C, this product can withstand high temperature environments.
Consistent resistance values across elements ensure uniform performance in circuit applications.
With a minimum operating temperature of -55°C, this product can function reliably in extreme cold conditions.
Low temperature coefficient of 200 ppm/°C ensures stable performance over a wide temperature range.
Matte tin finish over nickel terminals provides corrosion resistance and reliable electrical connections.
Consistent resistance values in successive elements ensure uniform performance in circuit applications.
Low package height of 0.45 mm allows for compact and space-saving designs.
Array/network resistor type offers multiple resistors in a single package for simplified circuit designs.
With an operating voltage of 25V, this product is suitable for a wide range of voltage applications.
Tolerance of 5% ensures accurate resistance values for precise circuit control.
Compact length of 3.8 mm provides a space-efficient solution for electronic systems.
Surface mounting type allows for easy and secure attachment to circuit boards.
High rated power dissipation of 0.25W ensures reliable performance in demanding applications.
Compliance with AEC-Q200 standard ensures high quality and reliability for automotive electronic applications.
Narrow width of 1.6 mm allows for efficient use of space in compact electronic designs.
Resistor Networks & Arrays EXB2HV101JV attributes and parameters. Explore more Resistor Networks & Arrays devices from Panasonic
Additional Features:
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Second or Last Element Resistance:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
EXB2HV101JV Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LAN8720A-CP-TR
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
YC324-JK-074K7L
Yageo
The Yageo YC324-JK-074K7L is a resistor network with 4 functions, each with 4700 ohm resistance. It operates b/w -55 to 155 °C and has a tolerance of 5%. With a max voltage of 200 V, it is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
766165191APTR7
Cts
Cts 766165191APTR7 resistor network has 14 functions, with resistance of 194 ohm and power dissipation of 0.12 W. It is a surface mount device suitable for applications requiring high precision resistors in compact spaces.
4116R-R2R-103LF
Bourns
Bourns 4116R-R2R-103LF is a 16-terminal resistor network with 10000 ohm resistance, 2% tolerance, and 0.125 W power dissipation. It features METAL GLAZE/THICK FILM tech in a DIP package suitable for ladder networks. Operating b/w -55 to 125 °C, it's ideal for applications requiring precise resistance values at up to 100 V.
TC164-JR-074K7L
Yageo's TC164-JR-074K7L resistor network features 4 functions with 4700 ohm resistance, 5% tolerance, and 155°C max operating temp. Ideal for AEC-Q200 compliant applications requiring surface mount technology in automotive electronics.
EXB34V203JV
Panasonic
The Panasonic EXB34V203JV is a resistor network with 2 functions, each with a resistance of 20000 ohm and a power dissipation of 0.063 W. It features metal glaze/thick film technology, operates b/w -55 to 125 °C, and has a tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
EXB28V102JX
The Panasonic EXB28V102JX is a resistor network with 4 functions, each with a resistance of 1000 ohm and a tolerance of 5%. It operates at temperatures ranging from -55 to 125 °C and has an operating voltage of 50 V. This SMT package is ideal for automotive applications due to its AEC-Q200 reference standard compliance.
GUS-SS7BLF-02-8871-B
Tt Electronics Plc
GUS-SS7BLF-02-8871-B by Tt Electronics Plc is a 13-element resistor network with resistance of 8870 ohm, 0.05 W power dissipation, and 70 °C rated temperature. Ideal for surface mount applications in electronic circuits requiring precise resistance values and high temperature stability.
ACASA1002E1002P100
Vishay Intertechnology
Vishay Intertechnology's ACASA1002E1002P100 resistor network features 4 functions with 10k ohm resistance, 0.1W power dissipation, and 70°C rated temperature. Ideal for applications requiring isolated networks in thin film technology, SMT package style, and surface mounting type.
752091103G
The Cts 752091103G is a resistor network with 8 elements and a power dissipation of 0.12W. It has a rated temperature of 25°C and can operate at temperatures ranging from -55°C to 125°C. This surface mount device is commonly used in electronic circuits for its high resistance and low power consumption.
Y5076V0004TT0L
Vishay Foil Resistors
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: .01 %;
NOMCT16031001AT1
Vishay Intertechnology's NOMCT16031001AT1 is a rugged, thin film resistor network with 8 functions and 16 terminals. It has a resistance of 1000 ohm, tolerance of 0.1%, and operates at temperatures ranging from -55 to 125 °C. This surface mount array/network resistor is commonly used in applications requiring high precision and reliability.
YC124-JR-0722RL
YC124-JR-0722RL by Yageo is a 22 ohm resistor array with 4 functions, operating voltage of 25V, and rated power dissipation of 0.0625W. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and temperature coefficient of 200 ppm/°C.
CAY10-103J4LF
Bourns CAY10-103J4LF is a 4-function resistor network with 10000 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated networks with operating voltage up to 25 V. Features metal glaze/thick film technology and temperature coefficient of 200 ppm/°C.
4114R-1-331LF
Bourns 4114R-1-331LF is a 330 ohm resistor network with 14 terminals, rated for 2W power dissipation at 100V. Featuring metal glaze/thick film technology, it has a temperature coefficient of 50 ppm/°C and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
Y0006V0107VV0L
Vishay Precision Group
ARRAY/NETWORK RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 6000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 175 Cel; Tolerance: .005 %;
L071S472LF
L071S472LF by Tt Electronics Plc is a resistor network with 6 elements, each having a resistance of 4700 ohm. It has a power dissipation of 0.125 W and operates within a temperature range of -55 to 125 °C. This rectangular package resistor is ideal for applications requiring precise resistance values in bussed network configurations.
MPMT2002QT5
Vishay Intertechnology's MPMT2002QT5 is a thin film resistor network with 2 elements, each 10000 ohm. It has a power dissipation of 0.1W and tolerance of 0.05%. Ideal for applications requiring precise resistance values in compact SOT-23 packages with surface mounting type.
CN1E4TTD101J
Koa Speer Electronics
Koa Speer Electronics CN1E4TTD101J is a 100 ohm resistor array with 4 functions, 0.063 W power dissipation, and 70-125 °C operating temperature range. Ideal for SMT applications requiring isolated network type resistors in compact 0804 package size.
NOMCT16031001AUF
Vishay Intertechnology's NOMCT16031001AUF is a 1000 ohm resistor array with 8 functions, 16 terminals, and 0.1% tolerance. With a thin film technology and rugged construction, it operates b/w -55 to 125 °C for various applications in resistor networks & arrays. Suitable for SMT mounting, it has a power dissipation of 0.1 W and can handle up to 100 V operating voltage.
CAT16-681J4LF
CAT16-681J4LF by Bourns is a SMT resistor network with 680 ohm resistance, 5% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in electronics requiring isolated network type with 8 terminals and operating voltage of 50 V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EXB28VR000X
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 0 ohm; Maximum Operating Temperature: 125 Cel; First Element Resistance: 0 ohm; Packing Method: TR, PUNCHED, 7 INCH;
EXB2HV103JV
The Panasonic EXB2HV103JV is a resistor network with 8 functions, each with a resistance of 10000 ohm. It has a power dissipation of 0.063 W and operates b/w -55 to 125 °C. This SMT package is ideal for applications requiring isolated network resistors in automotive electronics.
EXB28V103JX
The Panasonic EXB28V103JX is a resistor network with 4 functions, each with a resistance of 10000 ohm and a power dissipation of 0.063 W. It is designed for surface mount applications in electronic circuits, offering a temperature coefficient of 200 ppm/°C and an operating voltage of 50 V.
EXB28V220JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; No. of Elements: 1;
EXB28V330JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Width (Package): 1 mm;
EXB2HV330JV
Panasonic EXB2HV330JV is a 33 ohm resistor network with 16 terminals, SMT package style, and 5% tolerance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for automotive applications due to AEC-Q200 reference standard compliance.
EXB2HV102JV
Panasonic EXB2HV102JV is a resistor network with 8 functions, each with 1000 ohm resistance. It has a power dissipation of 0.063W and operates b/w -55 to 125 °C. Ideal for SMT applications requiring isolated networks with a tolerance of 5%.
EXB28V472JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Technology: METAL GLAZE/THICK FILM;
EXB2HV220JV
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
EXB2HVR000V
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 0 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Second or Last Element Resistance: 0 ohm;
EXB2HV472JV
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
EXB28V104JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Second or Last Element Resistance: 100000 ohm;
EXB24V103JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Height (Package): .35 mm;
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -55 Cel;
EXB28V101JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Second or Last Element Resistance: 100 ohm;
EXB28V222JX
The Panasonic EXB28V222JX is a resistor network with 4 functions, each with a resistance of 2200 ohm and a power dissipation of 0.063 W. It operates b/w -55 to 125 °C and has a tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance.
EXB28V510JX
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 51 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %; Minimum Operating Temperature: -55 Cel;
EXB2HV470JV
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
EXB2HV100JV
EXB2HV100JV by Panasonic is a rectangular package resistor network with 8 functions and 10 ohm resistance. It has a power dissipation of 0.063 W and can operate at temperatures ranging from -55 to 125 °C. This component is commonly used in surface mount applications requiring high precision resistance.
EXB2HV105JV
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved