Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Panasonic ERZV07D560 is a VARISTOR with 3.4J energy capacity, suitable for SURGE PROTECTION applications. It has a max operating temperature of 85°C and operates at 45V DC voltage. With radial terminal placement and through hole mounting, it offers reliable protection in bulk packaging.
Median Price
$0.167
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.240
100+ parts
$0.123
1k+ parts
$0.102
10k+ parts
$0.094
Mouser Electronics
$0.360
$0.191
$0.160
$0.147
Avnet
-
Master Electronics
$0.098
$0.091
Verical
$0.115
$0.108
Arrow
$0.087
Chip1Stop
$0.219
$0.101
Nova Conductors
$0.116
TME
$0.290
$0.146
$0.105
Electro Sonic
$0.121
IBS Electronics
$0.257
Vyrian
Schukat
$0.075
Semi Source
Inventory MP
Bristol Electronics
Rebound Electronics
Sunrise Surplus Inc.
Continental Prestige Electronics
$0.237
$0.120
$0.072
Perfect Parts
Authorized Procurement Solutions
Netroflash
$0.113
$0.110
SURGE PROTECTION - This thermistor is specifically designed for surge protection applications, making it a reliable choice for safeguarding electronic devices.
RADIAL - The radial terminal placement allows for easy installation and secure connection, ensuring stable performance under various conditions.
DISK PACKAGE - The disk package shape provides durability and compactness, making it suitable for space-constrained applications.
3.4 J - With a high energy absorbing capacity, this varistor can effectively handle surges and protect sensitive components.
BULK - Being packed in bulk makes it convenient for purchasing in large quantities, ideal for manufacturers or repair services.
2 - The two terminals provide a simple connection setup, reducing installation time and effort.
Radial - The radial package style is versatile and easy to work with, suitable for a wide range of circuit designs.
WIRE - The wire terminal shape ensures a secure connection and allows for flexibility in mounting options.
85 °C - With a high maximum operating temperature, this varistor can handle demanding environments without compromising performance.
40 °C - The low minimum operating temperature allows for use in cold climates or applications where temperature fluctuations are common.
TIN - The tin terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability.
8.5 mm - The compact height of the package makes it suitable for applications with limited space availability.
VARISTOR - Being a varistor, this product is an excellent choice for voltage regulation and surge protection in electronic circuits.
35 V - With a high RMS voltage rating, this varistor can protect against voltage spikes and ensure stable operation within the specified range.
45 V - The operating voltage of 45 V allows for a wide range of applications, making it suitable for various electronic devices and circuits.
8.5 mm - The length of the package is compact, making it ideal for applications where space is a premium.
THROUGH HOLE MOUNT - The through-hole mounting type ensures easy and secure installation on circuit boards, providing stability during operation.
0.02 W - With a low power dissipation rating, this varistor can protect against surges without generating excess heat.
CQC - Meeting the CQC reference standard ensures that this varistor complies with quality and safety regulations, providing peace of mind for users.
45 V - The high maximum DC voltage rating allows this varistor to handle a wide range of voltage levels, making it versatile in various applications.
5 mm - The narrow width of the package offers flexibility in mounting options and allows for efficient use of space in compact designs.
Non-linear Resistors ERZV07D560 attributes and parameters. Explore more Non-linear Resistors devices from Panasonic
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Reference Standard:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
ERZV07D560 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Sensitron Semiconductor
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
B59980-C80-A70
TDK
TDK B59980-C80-A70 is a PTC thermistor with 25 ohm resistance, rated for 63V AC voltage. It is used for overload protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -40°C to 125°C with a tolerance of 25%.
V430CH8
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Operating Voltage: 369 V;
55002
Ysi
NTC THERMISTOR; No. of Terminals: 2;
MOV-10D561KTR
MOV-10D561KTR by Bourns is a VARISTOR with 70J energy capacity, 350V RMS voltage, and 460V operating voltage. Ideal for surge protection in circuits with -40 to 105°C temp range, it comes in radial package style for through-hole mounting.
B72210S2301K101
The TDK B72210S2301K101 is a VARISTOR with 60J energy capacity, 300V RMS voltage, and 385V operating voltage. It is used for surge protection in various applications due to its METAL OXIDE FILM technology and radial package shape.
NCP18WF104J03RB
Murata Manufacturing
Murata Manufacturing's NCP18WF104J03RB is a Non-linear Resistor with 100000 ohm resistance, 5% tolerance, and operating voltage of 5V. It is used for TEMPERATURE SENSING applications due to its NTC THERMISTOR type, -40 to 125 °C operating temperature range, and high thermal sensitivity index of 4250 K. The dual-ended rectangular package with SMT style and tin terminal finish makes it suitable for surface mount installations in various electronic devices.
RXEF250K-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Rated AC Voltage (URac): 72 V; Additional Features: 0.05-0.08 OHMS AT 20 DEG CEL;
GMOV-20D271K
The Bourns GMOV-20D271K is a metal oxide varistor with a max energy absorbing capacity of 305 J. It is used for overload protection in applications such as electrical circuits and power supplies. With its radial terminal placement and through-hole mounting, it offers reliable performance in a compact package (23mm x 9mm).
Thomson Consumer Electronics
VARISTOR; Mounting Type: SURFACE MOUNT; Operating Voltage: 369 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 23 J; Maximum Circuit RMS Voltage: 275 V;
RXEF185K-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Thermistor Application: TEMPERATURE SENSING; Rated AC Voltage (URac): 72 V;
B57164K0101J000
B57164K0101J000 by TDK is a NTC thermistor with 100 ohm resistance, 5% tolerance, and 3200 K thermal sensitivity index. It is used for temperature compensation applications with a rated temperature range of -55 to 125 °C. The thermistor has radial terminal placement and matte tin finish, suitable for through hole mounting in various electronic devices.
0ZCG0150BF2C
Bel Fuse
Bel Fuse's 0ZCG0150BF2C is a PTC resettable fuse with resistance of 0.04 ohm and rated power dissipation of 1W. It is used for temperature sensing applications, featuring dual-ended terminals and surface mounting type. Operating voltage is 24V with operating temperature range from -40 to 85°C.
GA10K4A1A
TE Connectivity
TE Connectivity's GA10K4A1A is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
NTCS0603E3103JLT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103JLT is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3435 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its dual-ended terminal placement and surface mount package style. The thermistor has a rated temperature range from -40°C to 150°C, making it suitable for various environmental conditions.
RUEF900
TE Connectivity's RUEF900 is a PTC resettable fuse with resistance of 0.02 ohm and rated power dissipation of 4.2W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. Terminal placement is radial in a rectangular package, suitable for through hole mounting.
B72520T0350K062
B72520T0350K062 by TDK is a VARISTOR with max. circuit RMS voltage of 35V and operating voltage of 45V. It has a max. energy absorption capacity of 0.4J, suitable for surge protection applications in electronics due to its dual-ended terminal placement and surface mounting type.
V3.5MLA0805LNH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Shape (Package): RECTANGULAR PACKAGE; Terminal Shape: WRAPAROUND; JESD-609 Code: e3;
V275LA20A
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Operating Voltage: 369 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 75 J; JESD-609 Code: e0;
ERZE14A391
Panasonic
The Panasonic ERZE14A391 is a VARISTOR with 275J energy capacity, 320V operating voltage, and 1W power dissipation. Ideal for surge protection in circuits with max 250V RMS or 320V DC voltages. RADIAL terminal placement and DISK PACKAGE shape make it suitable for THROUGH HOLE MOUNT applications.
ERZVF1M330
Panasonic ERZVF1M330 is a VARISTOR with 20V RMS and 26V DC max circuit voltage, used for SURGE PROTECTION. It has a max energy absorption of 1.2J, operates b/w -40°C to 85°C, and features DUAL ENDED terminals in a RECTANGULAR SMT package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ERZV07D470
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Thermistor Application: SURGE PROTECTION;
ERZV07D470CS
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit DC Voltage: 38 V;
ERZV10D390
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; Package Style (Meter): Radial;
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: TIN OVER NICKEL; Terminal Placement: DUAL ENDED;
ERZV20D471
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 300 V; Terminal Shape: WIRE;
ERZVF2M471
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 85 Cel; Length (Package): 8 mm; Terminal Shape: WRAPAROUND;
ERZV10D471
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 385 V; Minimum Operating Temperature: -40 Cel;
ERZV05D471
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Terminal Finish: TIN;
ERZV05D220
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .01 W; Maximum Operating Temperature: 85 Cel; Thermistor Application: SURGE PROTECTION; Shape (Package): DISK PACKAGE;
ERZVF2M101
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 60 V; Terminal Placement: DUAL ENDED;
ERZV14D182
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Maximum Energy Absorbing Capacity: 510 J; Minimum Operating Temperature: -40 Cel;
ERZV14D182CS
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; Length (Package): 17 mm;
ERZV20D101
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE; JESD-609 Code: e3;
ERZV20D431
ERZV20D431 by Panasonic is a VARISTOR with 303J energy absorption, 275V RMS voltage, and 350V operating voltage. Ideal for SURGE PROTECTION applications due to its radial terminal placement and matte tin finish. Suitable for THROUGH HOLE MOUNT with CQC, CSA, UL, VDE certifications.
ERZV10D511
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Package Style (Meter): Radial; Terminal Finish: TIN;
ERZV14D431
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Width (Package): 6 mm;
ERZVF2M270
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .02 W; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 22 V; Length (Package): 8 mm;
ERZV07D431
Panasonic ERZV07D431 is a VARISTOR with 40J energy capacity, 275V RMS voltage, and 350V operating voltage. Ideal for SURGE PROTECTION applications due to its radial terminal placement and disk package shape. With CQC, CSA, UL, VDE certifications, it offers reliable protection in a compact design.
ERZV10D751
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Operating Voltage: 615 V; No. of Terminals: 2;
ERZV14D431CS
The Panasonic ERZV14D431CS is a VARISTOR with 155J energy absorption, 275V RMS voltage, and 350V operating voltage. Ideal for surge protection in circuits with temperatures ranging from -40°C to 85°C. Suitable for THROUGH HOLE MOUNT applications due to its RADIAL terminal placement and DISK PACKAGE shape.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved