Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panasonic 2R5TPE330M9 is a Tantalum Capacitor with 330uF capacitance, 2.5V rated DC voltage, and 0.10 Tan Delta. Ideal for applications requiring high ripple current handling up to 3900mA, such as power supplies and filtering circuits due to its low leakage current of 0.0825mA and compact SMT package design.
Median Price
$1.266
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Conrad
1+ parts
$2.489
100+ parts
$2.228
1k+ parts
-
10k+ parts
Mouser Electronics
$2.850
$1.510
$1.270
$1.160
Master Electronics
$1.148
$1.125
Future Electronics
$5.690
TTI
$1.090
DigiKey
$1.165
Chip1Stop
$0.839
$0.750
Farnell
$1.096
$0.901
$0.883
Element14
$2.300
$1.930
$1.810
Newark
$1.760
$1.480
Arrow
Verical
DF Sales Co.
$0.800
Nova Conductors
$1.055
TME
$2.260
$1.170
$1.050
IBS Electronics
$8.023
Prism Electronics
NAC Semi
$11.380
North Shore Components
Semi Source
Chip Stock
Vyrian
Bristol Electronics
Schukat
$0.759
$0.659
Electro Sonic
$0.678
$0.664
Inventory MP
ComSIT Distribution GmbH
ComSIT USA
Next Level Components, LLC
Component Sense
Lantek
ACDS - Activité Composants Distribution Service
VNN
Netsource Technology, Inc.
Sunrise Surplus Inc.
PC Components Company LLC
Conversion2
Contempo Components LLC
Component Electronics Inc.
Resion
Aztec Data Supply Inc.
$0.476
Semicontronic
$0.510
$0.497
$0.495
Modulus Dynamics
$0.553
Corohmni
$0.569
Argo Parts USA
$0.959
Netroflash
Continental Prestige Electronics
$1.100
$0.700
Perfect Parts
Authorized Procurement Solutions
Assy Fe
GreenTree Electronics
Glotronic Ltd.
Futuretech Components
Eastek
Robosynatics
$0.191
$0.177
Lucentia Tech
Kepictronics
Tantalum capacitors have high stability and reliability, making them ideal for use in various electronic applications.
Low Tan Delta indicates low dissipation factor, ensuring efficient performance and minimal energy loss.
Low leakage current ensures minimal power loss and reliable operation.
High capacitance value allows the capacitor to store and supply adequate charge for various electronic circuits.
Suitable for low voltage applications, providing stable performance within the specified voltage range.
Surface mount technology allows for easy and secure mounting on PCBs, saving space and enhancing assembly efficiency.
Low ESR value ensures minimal power loss and efficient energy transfer in the capacitor.
Fixed Capacitors 2R5TPE330M9 attributes and parameters. Explore more Fixed Capacitors devices from Panasonic
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
2R5TPE330M9 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
Panasonic is a global leader in the design, manufacture, and sale of electronic products for consumer, business and industrial use. Established in 1918, Panasonic has grown to become one of the largest electronics companies in the world with more than 250,000 employees across over 500 consolidated subsidiaries. The company offers a wide range of products including household appliances such as flat-screen TVs and air conditioners, mobile phones, automotive components, office equipment such as copiers and printers, and medical devices.
CEO
Yuki Kusumi
Executive VP, CFO
Hirokazu Umeda
Chief Technology Officer (CTO)
Tatsuo Ogawa
Fabrication
Fab Initiation
Japan
Shiodome
Wafer Capacity
Shinagawa
Oshiage
Kadoma
Kashiwara
Kusatsu
HigashiOmi
Hikone
Kyoto-shi
Kobe
Kato
Yamatokoriyama
Tsu
Kasugai
Fukuroi
Oizumi
Tendo
Tsubame
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
Toshiba
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
BFC237036472
Vishay Intertechnology's BFC237036472 is a rectangular package film capacitor with a capacitance of 0.0047 uF. It has a rated AC voltage of 160 V and a rated DC voltage of 250 V. This capacitor is commonly used in applications requiring fixed capacitors, such as automotive electronics or industrial equipment.
CC0603JRNPO9BN180
Yageo
Yageo's CC0603JRNPO9BN180 is a ceramic capacitor with 0.000018 uF capacitance and 50V URdc. It has C0G temperature characteristics, -55 to 125 °C operating range, and 30ppm/°C temp coef. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
BFC238320683
Vishay Intertechnology BFC238320683 is a film capacitor with 0.068 uF capacitance, 630 V rated DC voltage, and 220 V rated AC voltage. Ideal for applications requiring a fixed capacitor with polypropylene dielectric material in through-hole mounting style. Operating temperature range from -55 to 105 °C makes it suitable for various electronic circuits.
GRM155R70J105KA12D
Murata Manufacturing
Murata Manufacturing's GRM155R70J105KA12D is a 0402 SMT ceramic capacitor with 1uF capacitance, 6.3V URdc, and X7R temperature characteristics. It has a negative tolerance of 10% and operates b/w -55°C to 125°C. Ideal for compact electronic devices requiring stable capacitance in a small form factor.
CGA4J1X7R1H475K125AE
TDK
CGA4J1X7R1H475K125AE by TDK is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It features X7R temperature characteristics and operates b/w -55 to 125°C, making it ideal for automotive applications meeting AEC-Q200 standard. With SMT package style and matte tin finish, it's designed for surface mounting in compact electronic devices.
C1210C106M6PACTU
KEMET Corporation
KEMET C1210C106M6PACTU is a ceramic capacitor with 10uF capacitance and 35V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with high capacitance and voltage requirements.
CK05BX104K
Cornell Dubilier Electronics
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM1555C1H101JA16D
Murata Manufacturing's GCM1555C1H101JA16D is a ceramic capacitor with capacitance of 0.0001uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
M39006/25-0072
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
08055C224KAT2A
KYOCERA AVX
08055C224KAT2A by KYOCERA AVX is a rectangular package ceramic capacitor with a capacitance of 0.22 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
C0805C104K5RACAUTO
KEMET C0805C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and wraparound terminals.
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
M39006/22-0345
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
12105C106K4T2A
12105C106K4T2A by KYOCERA AVX is a ceramic capacitor with 10uF capacitance, rated for 50V. It features X7R temperature characteristics and -55 to 125 °C operating range, suitable for AEC-Q200 applications. With a compact SMT package style and multi-layer design, it offers high reliability in automotive electronics.
C0805C104K5RACTM
KEMET C0805C104K5RACTM is a ceramic capacitor with 0.1uF capacitance, 50V URdc, and X7R temperature code. Ideal for SMT applications with -55 to 125 °C operating range. Features wraparound terminals in a rectangular package suitable for various electronic circuits.
GA0402Y103KXXAC31G
Vishay Intertechnology's GA0402Y103KXXAC31G is a ceramic capacitor with 0.01uF capacitance, rated for 25V DC voltage. It features X7R temperature characteristics and -55 to 150°C operating range, suitable for surface mount applications in automotive electronics meeting AEC-Q200 standards.
BFC241648203
Vishay Intertechnology BFC241648203 is a film capacitor with capacitance of 0.082uF, rated DC voltage of 63V, and negative tolerance of 2%. It is used in applications requiring fixed capacitors with polypropylene dielectric material and rectangular package shape for temperatures ranging from -55°C to 85°C.
M39006/25-0236
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL10B473KB8NNNC
Samsung Electro-mechanics
CL10B473KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.047uF capacitance and 50V rated DC voltage. It has a compact size of 1.6mm x 0.8mm x 0.9mm, making it suitable for surface mount applications in various electronic devices due to its X7R temperature characteristics and -55°C to 125°C operating temperature range. The capacitor's multi-layer design and wraparound terminals ensure reliable performance in diverse circuit configurations with a ±10% tolerance level.
M39006/25-0248
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2R5THE330MI
Sanyo Electronic Devices (Components)
TANTALUM CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Positive Tolerance: 20 %;
Panasonic
The Panasonic 2R5THE330MI is a Tantalum Capacitor with 330uF capacitance and 2.5V rated DC voltage. It features low Tan Delta of 0.10, high ripple current of 2800mA, and low ESR of 18mohm making it ideal for applications requiring stable power supply filtering in compact SMT designs.
2R5THE330MF
Panasonic 2R5THE330MF is a Tantalum Capacitor with 330uF capacitance and 2.5V rated DC voltage. It features low ESR of 15mohm, ideal for applications requiring high ripple current up to 3100mA in compact SMT designs. Suitable for use in electronics operating b/w -55°C to 125°C, offering reliable performance with polarized terminals.
TANTALUM CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Series: THE;
2R5TAE680MFL
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 680 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
2R5TPE330M9
TANTALUM CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Positive Tolerance: 20 %;
2R5THE330M
Panasonic 2R5THE330M is a Tantalum Capacitor with 330uF capacitance and 2.5V rated DC voltage. It has low ESR of 25mohm, ideal for applications requiring high ripple current up to 2400mA in compact SMT designs. With a temperature range from -55°C to 125°C, it suits various electronic devices needing reliable power filtering.
TANTALUM CAPACITOR; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Package Style (Meter): SMT;
2R5TAE220M9
Panasonic 2R5TAE220M9 is a Tantalum Capacitor with 220uF capacitance, 2.5V rated DC voltage, and 0.1 Tan Delta. Ideal for applications requiring high ripple current (3900mA) in compact SMT designs due to its small size (7.3x4.3x1.8mm) and low ESR of 9mohm at -55 to 105°C operating temperature range.
2R5TPE330MAZB
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
2R5TPE330M7
2R5TPF680M6L
Sanyo Electric
TANTALUM CAPACITOR; Capacitance: 680 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Height: 2.8 mm;
TANTALUM CAPACITOR; Capacitance: 680 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Terminal Finish: Palladium/Gold (Pd/Au);
2R5TPE470M7
Panasonic 2R5TPE470M7 is a Tantalum Capacitor with 470uF capacitance and 2.5V rated DC voltage. It features low ESR of 7mohm, ideal for applications requiring high ripple current (4400mA) and low leakage current (0.1175mA). Suitable for SMT mounting in electronics with operating temperatures from -55 to 105°C.
2R5TPE470M9
Panasonic 2R5TPE470M9 is a Tantalum Capacitor with 470uF capacitance, 2.5V rated DC voltage, and low ESR of 9mohm. Ideal for applications requiring high ripple current (3900mA) and operating temperatures from -55 to 105°C in SMT designs.
TANTALUM CAPACITOR; Capacitance: 470 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Polarity: POLARIZED;
2R5TPF680ML
TANTALUM CAPACITOR; Capacitance: 680 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Series: TPF(D3L);
TANTALUM CAPACITOR; Capacitance: 680 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER); Negative Tolerance: 20 %;
2R5TPE330MC
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved